Red RC » Sebastian

January 30, 2017

Jannick Namyslo wins at LRP-HPI-Challenge

The German MCRT-Aschaffenburg club recently held a round of the national LRP-HPI-Challenge and in the Touring Stock class it was Jannick Namyslo (Xray) who set the pace in qualifying. With three TQ runs Jannick easily snatched the overall TQ and he would also dominate the opening two A-mains with tone-to-tone wins to take the day’s win from Marcus Ruth (Xray) on the runner-up spot. Thorsten Zorn (Team Associated) would take the final podium spot from Jens Haller and Dirk Gündra in fourth and fifth respectively.

Source: Xray [teamxray.com]

January 30, 2017

Yokomo 24K gold-plated LCG bullet-type connectors

Yokomo have released their new 24K gold-plated low-profile bullet type battery connectors. Made to fit the new low centre of gravity LCG LiPo battery packs, the connectors have a low-height top button with a pre-shaped soldering area which in combination allows the connectors to easily clear even low-sitting top decks. The plugs are available as 4mm or 5mm variant, they come as pairs and Yokomo also offers a 4mm and 5mm combo set, containing one each, for battery packs with mixed 4mm and 5mm connector tubes.

Source: Yokomo [teamyokomo.com]

January 29, 2017

Arena T4’17 2.3mm carbon fibre chassis & new top decks

Arena have introduced a new 2.3mm carbon fibre main chassis as well as three new upper decks for the Xray T4’17 touring car. Starting with the chassis, the part is cut from 2.3mm high-quality carbon fibre and so it is 0.1mm thicker than the standard chassis, resulting in increased stiffness which makes it ideal for medium-high traction asphalt and carpet surfaces. On top of this the part is also meant to be more durable due to being thicker. Also new and made for the T4’17 are 1.6mm, 2.0mm and 2.3mm top decks. The parts allow to fine-tune the car’s behaviour on a range of surfaces with the 2.3mm part will offer a very aggressive steering but also improved braking performance due to providing an overall stiffer chassis assembly. All parts are a direct replacement and they are available now.

View one of the top decks here

January 27, 2017

JConcepts B6 rear ball stud mount & F2 body mount

JConcepts have introduced two new option parts for the Team Associated B6 series of buggies in the form of an aluminium rear ball stud mount and a 3-D-printed F2 body mount flange. Starting with the ball stud mount, the part is extra beefy to withstand the tremendous amount of stress in today’s racing atmosphere. The durability in this mounting area has been put to the test with difficult race circuits and especially with the introduction of the 6th generation of Team Associated buggies. JConcepts has added thickness around the screw mounting holes, thickened the main connection U-brace and for twisting and bending resistance and added a thick rib from the main body to the screw location boss. The mount comes in blue or black anodising and it is decorated with laser-etched JC logos.

Continue reading here

January 27, 2017

Team Associated T4.3 Ready-to-Run kits

Team Associated’s “near vintage” T4 2WD stadium truck is now available in the T4.3 variant and with RTR specification. The fully assembled truck features a new Team Associated 2.4Ghz radio system as well as an all new metal-gear, high-torque Reedy digital servo. Power is supplied by a Reedy 3300kV brushless motor while the water-resistant, high-power, 3S LiPo-capable Reedy electronic speed control with T-Plug and LiPo low-voltage cutoff provides smooth throttle control. Revised suspension arms provide additional durability and longer wear for everything from backyard bashing to head-to-head racing. The truck is available as RTR package without charger and battery and also as RTR LiPo Combo including a compact balance charger and LiPo battery pack.

View the features and more images here

January 27, 2017

JConcepts F2 bodyshell for B6 & B6D

Coming from JConcepts is the F2 buggy bodyshell for the Team Associated B6 and B6D. Based off of the original Finnisher body, the F2 is a drop fit for the popular B6-series buggy with cut-lines being included on each side of the body to accommodate stand-up 3 or 4 gear and lay-down transmission layouts, giving all out versatility. With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance/visible bias which help steering rotation in low traction corners. The side-pods have been simplified and JC-chamfered to remove unwanted changes in height to neutralise the at-speed handling. The front of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear which can be trimmed to allow air to escape at the top of the body. In addition to the newly designed body, JConcepts has included two of the latest Aero rear wings used by Ryan Cavalieri, Ryan Maifield and Spencer Rivkin to a 1st, 2nd and 4th place finish at the recent 2017 Reedy Race of Champions.

View more images here

January 27, 2017

Tekno RC welcome Ricardo Monteiro

Tekno RC have announced the signing of Portugal’s Ricardo Monteiro to their factory team. Ricardo’s experience and talent will be a great asset to their expanding European team as well as Tekno RC racers in the EU region. His first race for his new sponsor will be the Oleiros Trophy race in February and he had the following to say:

When the opportunity came to work with Tekno, I knew I had to take it into consideration. The quality of the cars plus the people that I would work with made for an easier decision. I would like to thank Ilias Arkoudaris, Daniel Lewis and all the guys involved, I believe we will have an awesome partnership together. I am already working hard getting to know the products and will be at the tracks soon with the new cars, they are awesome!

Source: Tekno RC [teknorc.com]

January 27, 2017

Yeah Racing aluminium motor fan mount with 40mm unit

Yeah Racing have introduced their new aluminium motor fan mount with 40mm Tornado fan unit. Machined from black anodised 7075 aluminium and featuring a wire-hiding channel the mount features a set screw to tighten down the clamp on the motor can and to lock it at the desired angle. The mount comes including a 40mm Tornado fan but it can also accommodate smaller 30mm units.

View another image here