Arrowmax have announced the signing of former IFMAR 1/10th 200mm World Champion, Meen Vejrak to their team. The Thai frontrunner will use Arrowmax’ range of tools to build, maintain and tune his rides for this season and beyond.
Source: Arrowmax [arrowmax-rc.com]
MIP have introduced the 17.5 Race topshaft for the Team Associated B6 series of buggies. The part offers a 30 percent decreased tooth width and an 18 percent weight reduction equating to less drag and less overall rotating mass when compared to its OEM counterpart. The ultra-light topshaft is made out of 7075-T6 aluminium and finished off with a premium strength high-grade hard-anodised coating.
Source: MIP [miponline.com]
Tekin have announced the addition of UK on-road ace Jimmy Maddison to the team. The Xray factory driver brings years of experience and top results to the team and he has the following to say about the deal:
I picked up a few of the latest Gen3 Redline motors for a race and was blown away by their performance right out of the box. I got great support from team manager Randy Pike even not being on the team. With his help I had great success right away and knew Tekin would be a great fit for me. I look forward to working alongside Randy and helping others around me go fast with Tekin.
Source: Tekin [teamtekin.com]
Zen Racing have introduced their new RXGT12 pan car kit for the popular GT12 racing class. With a focus on a simple and easy to work on design the car features simplifications where needed while maximising the important aspects to improve handling and performance. The car utilises a black-anodised aluminium main chassis for a low centre of gravity, a low CG rear pod design and a 3-bolt rear diff assembly with thrust bearing. The front ride height is easily adjusted using supplied shims with the front suspension also featuring spring steel axles and flanged ball bearings. Rear tweak adjustments are performed using side springs inside the damper tubes and the fully adjustable rear ride height can be fine-tuned using the included adjusters. A delrin pivot hole makes for bind free rear pod action and also part of the package are hard-coated pivot and stud balls, aluminium servo posts, black aluminium turnbuckles, a Kimbrough servo saver and a 66T 48 pitch spur gear. The kit is rounded out by a set of wheels and tyres.
View the features and more images here
Coming soon from Muchmore is the Fleta Pro V2 brushless speed controller. The upgraded ESC features the all-new Flow-Max2 aluminium heatsink case that now only improves heat dissipation but it also allows to route the receiver and switch wires on the left or right hand side of the case, depending on the preferred layout. Additionally the on/off switch is now of a plug-able design, allowing to use it or to leave it away – the latter leaves the controller permanently switched on. The option of dropping the switch makes for an overall cleaner wiring while also eliminating a possible error source. Also new with the V2 is the ability to use a fan extension wire to power an additional motor fan without soldering it to the battery terminals and on top of this the speedo now supports HV servos by offering a powerful 6V/7.4V 8A BEC system.
Team Associated have announced that the 2017 edition of the famous Reedy International Off-road Race of Champions will be held from January 19th to 22nd at OCRC Raceway in Huntington Beach, California. With three solid years of hosting the Reedy Race under its belt, OCRC remains the “Home of the Reedy Race” and the event continues to grow in popularity and prestige. On many racers’ “Bucket List,” the atmosphere and intensity of the race draws spectators and fans in from around the world, even if it’s just to watch and be a part of the most exciting race of the year. Entries for the 2017 Reedy International Off-Road Race of Champions open at noon, PST on September 1, 2016 exclusively on rcsignup.com and close October 16, 2016 at midnight, PST. As in previous years, the event features its traditional 2WD Open and 4WD Open classes along with the combined 2WD/4WD Invitational format. More information about the race can be found here and here.
UK PR Racing distributors Inside Line Models have introduced new optional caster hubs for the PR Racing SB401 buggy platform. The 11 degree caster block gives an alternative to the kit supplied 5 degree block, and the existing 8 degree option. The increased caster calms down initial steering, and provides a more predictable car with improved stability on bumpy sections. The parts come machined from aluminium, they are gun metal anodised and laser-etched for easy identification.
Source: Inside Line Models [insidelinemodels.com]
Kyosho have introduced the Mini-Z MR-03VE Pro MM2 chassis set. With its performance defining midship motor mount, new MM2 motor case allows the longer (94mm) wheelbase to be used. The existing MM motor case design can be used with the LL/98mm, 3L/102mm and 4L/106mm wheelbases, but the new MM2 motor case can be used with L, LL and 3L wheelbases. Also, compared to the existing RM motor case, mass balance is optimised to improve cornering performance and minimise tipping due to high side on hybrid surfaces. These performance features provide a huge advantage in the JSCC class with the narrow body required by the regulations. In addition, axle adjustment spacers allow changes to the rear axle shaft height and together with the new plastic friction shock, precision setting according to road surface conditions are possible. The kit, that comes without tyres, wheels and bodyshell, utilises the MHS2.4GHz system, which is usable with the optional KO Propo-made Synchro EX-6 transmitter, making for ultra-fast response.
View the features and more images here
