Red RC » Sebastian

June 30, 2015

T-Works XB4’15 floating servo mount

T-Works XB4'15 floating servo mount

T-Works have a new floating steering servo mount for the Xray XB4’15 buggy available. Doing away with the need to run the standard parts that connect the servo with both the chassis and the side pod the mount makes for a more equal left-to-right chassis flex as it utilises the “floating”, centre-mounted design most of today’s touring cars use. Included in the set comes an aluminium centre mount, an outer aluminium post and a sturdy carbon fibre upper plate.

Click here to view more photos

June 29, 2015

JConcepts Ruptures 2.2″ crawler tyres

JConcepts Ruptures 2.2" crawler tyres

New from JConcepts comes the Ruptures 2.2″ crawler tyre for vehicles such as the Axial Yeti. The extremely tacky yet versatile tyre offers a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirtier runs. The entire top level of tread has built-in cuts and recesses which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, the tyre features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The 154mm tall tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

June 29, 2015

Shepherd Premium Thrust Bearing Grease

Shepherd have announced the expansion of their range of lubricants with another product, the Premium Thrust Bearing Grease. The mineral oil based, water resistant and rust inhibiting lubricant can be used under high temperatures while thanks to its good mechanical stability only a small amount of grease is needed to extend the life and reduce the wear of any thrust bearing. The lubricant comes in a handy 6g container with a sticker on the lid for easy identification.

Source: Shepherd [team-shepherd.com]

June 29, 2015

Mark Gilliland wins at Ulster GP

The inaugural Ulster GP was held at the UMCC track in Ballymoney, Northern Ireland. Drivers travelled from all over Ireland and further afield to compete. Ballymoney is a compact technical track and the UMCC had done a superb job of preparing the venue including sugar watering the asphalt for the first time. Saturday practice was held in superb conditions and with track temperatures soaring the track was surprisingly fast. Sunday the track conditions were less than optimum and in the first A-main Andrew Smith (Xray) brought home a leg win. The second final saw a start to finish win for Mark Gilliland (Xray) and going into the third and final A-main three drivers, Mark Gilliland, Andrew Smith and Alan Bickerstaff (Team Associated) all had a chance of winning. The track had almost fully dried and grip was up to standard. The pace was hot at the front and despite close attention Mark came out the winner with a very quick 25 lapper off a standing start. Andrew Smith finished in 2nd while Alan Bickerstaff rounded out the top 3 result.

Source: Xray [teamxray.com]

June 29, 2015

David Ronnefalk takes win at Swedish Cup Rd2

SwedishCupRd2

The second round of the Swedish 1/8th Off-road Cup was hosted by the MHF Skarpnäck club and it had HB’s David Ronnefalk coming out successful in the 45 minute main of the Nitro Buggy class. Mugen’s Christoffer Svensson finished the final in 2nd while Robert Gustafsson (Agame) completed the podium result.

Click here to view the final result

June 29, 2015

Marco Natale wins Italian National Champs warm-up

The warm-up race for the 3rd round of the Italian Nitro Off-road Championship was held in Fermo and saw Marco Natale taking the day’s win some two laps in front of Fabrizio Teghesi. Davide Tortorici would round out the podium in 3rd place in front of Alessio Arioli and Stefano Rossi in 4th and 5th respectively.

Click here to view the final result

June 29, 2015

Capricorn Tesla 21 GT nitro engine

Capricorn have introduced the Tesla 21 GT nitro engine for 1/8th GT vehicles. Built using a same crankcase and crankshaft as Tesla’s 1/8th on-road engine the GT features a class specific timing, and a 5-port liner and 7mm venturi insert to comply with the classes’ rule book.

Click here to view more photos

June 29, 2015

Spec-R T4-15 one-piece motor mount version 2 set

New from Spec-R and made for the Xray T4-15 is the version 2 one-piece motor mount set. Making use of a redesigned motor and layshaft mount the set allows for a more equal left-to-right flex of the chassis and also more overall flex if needed as it connects to the upper deck using a single chassis post. Included comes an orange anodised motor and layshaft mount with ARS mounting points, a 64dp spur gear, alloy pulley, ball races and more.

Source: Spec-R [spec-r.com]