Red RC » Sebastian

January 14, 2015

Tebo takes Truck classes at CRCRC Winter Champs

The 28th Annual CRCRC Winter Mid-West Championships were held this past weekend at The Ohio R/C Factory in Jeffersonville, OH. This year would see a big increase in entries that would reach an impressive total of 471. In Modified Truck Kyosho factory driver Jared Tebo and Team Associated’s Ryan Cavalieri would both TQ two rounds of qualifying. After each drivers laps and times were added together, it was Tebo who would claim the overall TQ for the class. Tebo would dominate both A-Main one and A-Main two to take the Modified Truck Championship.

Click here to continue reading

January 14, 2015

BRCA GT & F1 Nationals Rd1 – Report

South Yorkshire Raceway saw the inaugural national meeting open the books on this never before seen class combination – the grand prix of the GTs and F1s. After the infamous GT12 class lost its national status in early 2014, when it ceased to be the 1/12 support class, GT12 really needed its own section to return to its former glory and flourish as a driver’s class. With a limited 30 driver grid seen at the 2013/14 supporting nationals and grey areas of rules being pushed further and further every round, the class that was so reputable previously, was struggling to keep afloat. The Clubman’s series was developed to back the class this year and with initially mild interest, it wasn’t looking good. However once the National series had been finalised, class popularity sky rocketed, with the final round of the Clubman’s series reaching an all time record of just under 90 participants.

Click here to continue reading the report

January 14, 2015

Ryan Cavalieri doubles at CRCRC Winter Champs

The 28th running of the CRCRC Electric Winter Midwest Championships were held at The Ohio RC Factory in Jeffersonville, OH, about 30 minutes south of Columbus. Organised by the CRCRC club, the event is one of the longest running and most popular events in the nation. With close to 500 entries, racers from all over the area attended to see how they stacked up against some of the best in the world. In the 2WD Modified class, Team Associated’s Ryan Cavalieri capitalised on his second-place starting position to pace Top Qualifier Jared Tebo throughout the main events. Sharing similar speed and lap times with Tebo, it came down to a clean 7 minutes throughout the triple A-mains. With wins in A2 and A3, Cavalieri showed the racing strategy he’s become famous for, taking the overall win. In the 4WD Modified class, the results were the same, with Cavalieri taking the wins in A1 and A2.

Source: Team Associated [teamassociated.com]

January 14, 2015

Ryan Maifield wins at Dirt Nitro Challenge warm-up

Ryan Maifield took a TQ and win in the 1/8th Pro Buggy class at the Dirt Nitro Challenge Warm-up. Maifield TQ’ed by a large margin during the 7 minute qualifier and went on to win the A-main with a consistent and quick drive. Team Associated’s Spencer Rivkin finished in the 2nd position showing that the young AZ driver can wheel a 1/8th as well.

Source: JConcepts [jconcepts.net]

January 14, 2015

MIP 1/5th scale 54mm 8-shoe racing clutch

MIP introduce their new 54mm 8-shoe racing clutch for 1/5th scale applications. As the stock clutch is non-rebuildable, heavy, prone to loose its edge in the first 15 minutes and fades quickly after, and most of all it takes a long time for the engine to spool up and the clutch to engage properly MIP have come up with a dedicated design to overcome these downfalls. With months of direct input from MIP’s engineering and race team the 54mm racing clutch hits harder faster, its shoe longevity is vastly improved, and when shoes and springs do wear out there’s no need to ditch the entire assembly as it is completely rebuildable. The lightweight design scrubs 50 percent of rotating mass, the 7075 aluminium construct offers 4, 6 or 8-shoe adjustability and it is a direct replacement on most large scale vehicles.

Click here to continue reading

January 14, 2015

Blaze Racing Awesomatix caster setting pointers

Available now from Blaze Racing are caster setting pointers for Awesomatix’ A700 touring car. Machined from 7075 aluminium and designed for the use with “tall” 1/10th off-road setup stations the 44mm pointers help to precisely set the caster angles on the complex Russian tourer. Each pointer sports an engraved logo and the set is available in natural or anodised black, red or gold colour. Custom engravings are available on request.

Source: Blaze Racing [blaze-racing.com]

January 14, 2015

Martin Bayer renews with Xray

Xray have announced that European Champion Martin Bayer will continue to race with the Slovakian company in 2015. Martin is an important member of Xray’s off-road R&D team and he will continue to use the company’s 1/10th and 1/8th scale off-road cars in his 2015 campaign that will include the 1/10th Worlds, 1/8th and 1/10th Euros, the EOS, as well as the Czech and German nationals beside other selected events. Martin has the following to say:

After successful racing seasons with [the] Xray team with my first European Champion title 1/10 off-road, winning the German national title and achieving multiple podium finishes at international races including European Championship I did not hesitate at all to extend my contract for 2015. Being part of the development team I now realize how much dedication and effort the entire R&D team puts in their work to make the best cars always better. I am very motivated to continue to help Juraj and the R&D team to make Xray cars this year successful on the tracks & races around the world and will work even harder in the R&D and of course on all the races to provide support to our Xray drivers and customers.

Source: Xray [teamxray.com]

January 14, 2015

SkyRC Toro Beast large scale brushless controller

SkyRC introduce the Toro Beast, a dedicated brushless speed controller for large scale electric vehicles. The 200A rated ESC is usable with 4S to 8S LiPo battery packs and it is housed in a sturdy aluminium case for protection and improved heat dissipation. Mounting lugs help to securely fasten the motor to the chassis or radio plate. An internal BEC system allows for a standard 6V or high voltage 7.4V output and a whooping 15A to feed even the most power-hungry large scale servos. Also part of the package is a data logging function that measures and records parameters such as battery voltage, amp draw, motor RPM and the controller’s temperature. On top of that the speed is widely adjustable using the SkyLink PC interface, the WiFi Module or SkyRC’s Progbox.

Click here to view the specifications