Red RC » Sebastian

July 9, 2013

Hitec X1-200 Touch multi-chemistry charger

Hitec introduce the X1-200 Touch DC multi-chemistry charger. The device is designed for the use with a 12V power supply and features a 3.2-inch high resolution touch screen, an integrated balancer and optimized operating software. The charger offers a 200W power circuit and up to 12A of charging and 2A discharge current. Included with the charger comes a universal balancing board, alligator clips and a T-type charging cable.

Click here to view more pictures

July 9, 2013

John Ermen wins 1/8th at West German regionals Rd3

Last weekend saw the third round of the West German nitro on-road regionals at the fast and tricky Hamm track. The weather on Saturday was rainy but the track dried up at around 2 o’clock and was afterwards sprayed with sugar water to up the traction a bit. On Sunday the weather was much better with the sun coming out making for around 23 degrees ambient temperature. After three heats of qualifying Steven Cuypers put his car in front with John Ermen in second and Emil Kostadinov in third position.

Click here to continue reading

July 9, 2013

Patrick Hofer wins Hohenems Summerchamps 2013

The Hohenems Off-Road Summerchamps in Austria were held the the EFAC Hohenems’ blue groove clay track and saw the attendance of 80 drivers from Switzerland, Austria and Germany. The race was well organised by the local club and offered perfect track conditions. In the early low-grip stages Team Associated’s Patrick Hofer put his Team Associated cars on top of the field in the 2WD and 4WD class and he also stayed there in the ‘blue groove’ finals winning both categories in style.

Source: HRC Distribution [hrcdistribution.com]

July 9, 2013

BRCA 1/8th Truggy & Electric Rd4 – Report

The BRCA Truggy and Electric 1/8th national series descended on a new dirt track for the series which was the NRC track near Bromsgrove, Birmingham. The track looked in tip top condition when the pilots arrived. Due the temperature at 7 o’clock they even had the sprinklers on. The lay out comprised of some nice well thought technical sections. Normal situation started at 9 o’clock with the Electric buggies starting of the meeting for the first of their three qualifying runs. It was evident from the first runs that it would not be a walk in the park. The weather was going to be a challenge for all drivers and cars as well as the track. The track started off quite loose but the wider Truggy tyres helped to push the lose dirt to sides which made the racing line starting to blue groove.

Click here to continue reading

July 9, 2013

Much More LiPo Safety Bag 2

Much More Racing introduce their updated LiPo charging container, the Safety Bag 2. The new variant offers improved fire-proof fibre material parts that securely cover the battery to offer increased safety in case the LiPo blows up while charging, discharging or storage. The bag offer enough space for three regular-size 2S packs, two 3S or one 4S pack and the lid is securely fastened using extra-large velcro pads.

Click here to view another photo

July 9, 2013

MIP Pro4mance SCTE steering linkage kit

Made for all Losi and TLR SCTE 4WD short course kits is the MIP Pro4mance front steering linkage kit. Containing virtually slop-free Dubro rod ends and lightweight Lunsford titanium turnbuckles the linkage set does away with any binding upon compression for improved handling and control. Fitting on all SCTE kits the parts also scrub some weight compared to the stock setup. Included with the set, that is available for pre-order now, comes all needed hardware.

Source: MIP [miponline.com]

July 9, 2013

Vampire Racing 2S LiPo receiver battery packs

New from Vampire Racing come LiPo receiver battery packs for 1/8th and 1/10th scale nitro vehicles. Available as standard-size 2500mAh hump and 2300mAh straight pack the 2S packs offer a voltage of 7.4V ideal for the new breed of HV-compatible receivers and servos. The semi-hardcase packs come with a protective inner shield and sport a stealthy black heat shrink tube for cool looks and best possible protection of the cells in all racing conditions. Both battery packs are pre-wired with a balancer connector and JR/Futaba-compatible universal plug.

Click here to view the other new pack

July 8, 2013

Pitshark Design Hole Shot body hole markers

Pitshark Design introduce the Hole Shot body hole markers for 1/8th and 1/10th scale vehicles. Designed in collaboration with Toni Rheinard, the markers allow the precise mounting of painted and clear bodyshells with the help of rubber-protected body mount extensions and O-shaped magnets. The extensions are simply attached to the body posts and the magnets are used to locate the position of the body mounts for perfectly aligned body shells. The rubber material prevent the body from becoming scratched while the body post positions are easily marked with a permanent pen through the holes in the magnet.

See a demonstration video after the break