Red RC » Sebastian

October 30, 2019

JConcepts NCTS Rd4 Midwest Carpet Nats – Report

The final round of the inaugural JConcepts NCTS was held at Thunder Road RC Raceway in Waite Park, Minnesota over the weekend. The popularity of carpet and turf racing is definitely on the rise and without any doubts whatsoever, racing on artificial surfaces is clean, consistent, and drivers always have a good amount of grip. As the NCTS season 1 comes to an end, the organisers are convinced that the carpet wave will carry strong into 2020 and beyond. For the season finale, the hype was high as many of the team drivers have been raving about the facility and they are completely right. The layout was actually very cool. It was a reflection of itself if you were to split it down the middle. With the jumps and features laid out in a manner that challenged drivers, it wasn’t an easy track to get around going 100 precent. However, cruise around at 80 percent, it was very easy. The double vertical chicanes haven’t been done in a while, but definitely, required precision and commitment to get the hot laps. The jumps were quite easy, which promoted close racing and many laps of battling on the track that ultimately made for a wonderful race experience. Overall, it was a fun layout that favoured cars with balanced setups that inspired confidence and control.

Continue reading the report here

October 30, 2019

Speedzone Evolution LiPo battery packs

Speedzone have announced their new Evolution brand, designed for and dedicated to competitive racing. Made to broaden Speedzone’s exposure in the competitive RC car racing scene, the first product offerings for the brand are 1S, 2S standard and shorty 130C LiPo packs. The 6000mAh 7.4V LCG pack measures 139x47x22.5mm and weighs 294g. The 5200mAh 7.4V shorty pack measures 96x47x25mm and weighs 228g, and the 8100mAh 3.7V pack measures 93x47x18.5mm and weighs in at 160g. All packs were designed to produce high voltage with low internal resistance and utilize 5mm bullet connectors.

View the shorty LiPo packs here

October 29, 2019

Factory Team logo T-shirts

Associated Electrics have introduced their new Factory Team logo T-shirts. These white tees are an American-made blend of soft 100 percent cotton and available in six sizes of S to 3XL. The redesigned Factory Team logo is on the front, marking its wearer as a hop-up expert.

Source: Associated Electrics [associatedelectrics.com]

October 29, 2019

Alain Sarafyan doubles at Turkish Off-road Nats

The Turkish National 1/8th Off-road Championship was hosted by the Luleburgaz RC Yildizlar track last weekend. The 3-day event was held in 1/8th Nitro and Electric classes and when the dust had settled it was Alain Sarafyan with the overall in Nitro Buggy as Can Soykal and Emre Bozdoğan came in 2nd and 3rd respectively. Over in E-Buggy it was again Alain Sarafyan with the overall win as Bora Mumcu and Serkan Tumer completed the top 3 result.

Source: Xray [teamxray.com]

October 29, 2019

Czech Masters Rd1 – Report

The opening round of the Czech Masters, a new electric off-road series in the Czech Republic, was held at the Sport Arena Prague last weekend. The schedule saw four rounds of qualifying followed by triple A-mains, however due to unfortunate tech issues in the morning, qualifying had to be cut short to three qualifiers. Young Max Götzl was in control of things in the 2WD Buggy, 4WD Buggy and Stadium Truck class as he was able to top qualify all of them. In the Truck class it was Frank Hempel 2nd and Miroslav Loupy 3rd, in 2WD and 4WD Jiri Mara lined up 2nd on the grid and Michal Blahovsky was 3rd in 2WD and Dominik Vlasek 3rd in 4WD.

Continue reading the report here

October 29, 2019

Phend & Marasco sweep Masters of Dirt

Beach RC of Myrtle Beach, South Carolina hosted the Masters of Dirt race last weekend, attracting nearly 280 entries. The event was held in Modified and Stock 1/10th off-road classes and in Pro 2WD Mod Buggy it was TLR‘s Dakotah Phend with the overall TQ and also the win in the single 10-minute A-main event, leaving behind Team Associated‘s Dustin Evans in 2nd. Team Associated‘s Aydin Horne would round out the top 3 result in front of TLR‘s Aaron Kothman and Yokomo‘s Max Flurer.

Continue reading the report here

October 29, 2019

Fenix G56 aluminium chassis & pod plates

Coming from Fenix are new aluminium chassis options for the G56 series 200mm and 235mm wheelbase pan cars. First up is a 7075 aluminium main SWB short wheelbase chassis plate that us usable for pivot and link-type cars. A direct replacement for pivot-style kits the chassis is also usable on V-link cars, however it shortens the wheelbase by 11mm and does not allow the use of standard-size “touring car” LiPos. The chassis comes black anodised and with laser-etched logos. Also new are 7075 aluminium pivot-style power pods for 200mm and 235mm wide cars. Like the main chassis the lower pod plates come machined from high-quality aluminium while a black surface coating ensures factory looks and added surface protection.

View the pod plates here

October 29, 2019

Wesley van Helmond wins at Winter is Coming Race

The Mach-One Helmond track in Helmond, The Netherlands held their 2019 Winter is Coming race last weekend in 1/8th nitro and electric off-road classes. In the Nitro Buggy category, attracting 44 drivers, it was Jarno Pijpers (SWorkz) with the overall TQ after taking two of the three qualifying rounds. Wesley van Helmond (SWorkz), who won a single qualifying round, came in 2nd. The 30-minute A-main event then saw Wesley getting past Jarno on the second lap and from there he never looked back to take the win a lap in front of Jeffrey Halsema (Team Associated) while Jarno Pijpers rounded out the top 3 results.

View the final results here