November 7, 2018

Teponoja & Martikainen win at Finnish TC opener

The opening round of the Finnish Electric Touring Car Nationals was held in Lahti last weekend. The event was held on ETS carpet and as part of a hobby fair, attracting both many drivers and spectators. The competitive Touring Modified class saw Miko Teponoja taking the overall TQ in the tie-breaker with Joel Valander coming in 2nd on the grid. The opening A-main saw the TQ holder taking the win from Georgy Chmigal while in A2 it was Joel Valander who took the win from Miko in 2nd. The decisive third A-main again saw Miko holding the upper hand from Joel, and so it was Miko with the overall win from Joel 2nd as Georgy rounded out the top 3 in front of Vesa Yli and Henry Salmen.

Continue reading here

November 7, 2018

Ride DF 190mm touring car wing set

Coming from Ride is their new DF wing set for 190mm touring car body shells. Inspired by nature design the wings sport specially-shaped wave sections – as seen on dragonfly wings – to create downforce even at low air speeds. The set includes a type A wing for medium to high speed tracks and Modified classes, sporting a full-face wave section, while the type B wing was designed for low to medium speeds and Stock racing classes – the latter wing only utilises wave sections on the outer portions. Included in the set are four printed carbon fibre side plates and the wings are usable for most 190mm touring car body shells.

Source: Ride [rc-ride.co.jp]

November 7, 2018

XRS PLMS On-road Series Rd2 – Report

The second race of the XRS PLMS On-road Series was held in the Polish town of Scinawka Srednia. The event not only attracted local drivers but also guests from the Czech Republic to compete in the three classes of Touring Modified, Touring 13.5T Stock and Formula. The Stock and Formula classes use XRS Hobbywing motors and all classes roll on pre-glued Hudy rubber. In Touring Modified it was Jakub Rozycki who took the win ahead of Jaroslaw Siwek and Martin Korinek in 2nd and 3rd respectively, making it an all-Xray podium.

Continue reading the report here

November 7, 2018

HB Racing D418 aluminium rear hubs

HB Racing have introduced an optional aluminium rear hub set for D418 buggies. The new rear hubs feature a revised geometry that includes new camber link attachment points and vertical ball studs for fine camber link adjustments and precise roll center tuning. The set includes a pair of rear hubs that are precision machined from high-quality aluminium with a hard-anodised black finish for wear and looks.

Source: HB Racing [hbracing.com]

November 6, 2018

JConcepts motor & rotor storage box

JConcepts has reached into their bag of tricks to help racer organisation with the introduction of their new motor and rotor storage box. The box includes plenty of space for assembled motors, individually spaced rotors and a pocket for miscellaneous motor tuning items. The box has a small footprint which makes it ideal for short trips with minimal amounts of space. Inside the box is roomy enough for three assembled motors and cushioned with high-impact foam that allow the items to lay in a bed like a cradle during rest periods. At the other end, five areas can house rotors and the pocket at the end gives all-important extra storage. The foam insert material has a grabby feel and allows the user to manipulate to grab needed items. The custom built storage box, moulded black in colour has JConcepts.net logo for authenticity and built-in plastic latch for easy open and close operation.

View more images here

November 6, 2018

Team Associated 6.1 FT graphite motor plate

Team Associated have introduced their new B6.1 series Factory Team graphite motor plate that adds strength and rigidity with its 3mm thick material. The item also reduces the weight by 40 percent over the stock motor plate and it fits the laydown and layback gearboxes on the B6.1, B6.1D, T6.1, and SC6.1 kits.

Source: Team Associated [teamassociated.com]

November 6, 2018

Etronix PowerPal 3.0 AC/DC multi-charger

Coming from Etronix is the new PowerPal 3.0 AC/DC balance charger for LiXX, NiXX and Pb cells. It offers up to 10A of charge current, it is microprocessor-controlled and features precision Lithium cell balancing. Other features include cyclic charging and discharging for NiXX cells, a 2.1A USB charge socket, servo testing function and a DJI Phantom 2 and 3 battery charge programs. A dedicated LiHV charge mode rounds out the package.

Source: Etronix [etronix-rc.com]

Mibosport
VP Racing
T-Works