Red RC » Sebastian

March 16, 2018

UREE touring car pitch damper unit

Japanese company UREE have introduced their new centre pitch damper for some of the most popular electric touring cars. The damper was originally designed for the latest generation of 2WD off-road buggies but now also found its way into modern day touring cars where it acts as a brace between the servo mount and motor mount – a task that is normally carried out by a fixed linkage, metal or carbon fibre brace. The damper however will make for a smoother transition between coasting and acceleration, resulting in improved car control especially when running modified motors. The damper unit is available now in three different length for the Yokomo BD8 2018, Xray T4 and Infinity IF14/Kyosho TF7.7.

Source: UREE [uree.blog.jp]

March 16, 2018

Race Opt MTS T2 limited edition conversion kit

Race Opt have introduced a limited edition chassis conversion kit for the MTS T2 electric touring car. The set included a new carbon fibre lower deck, a new 1-piece upper deck, as well as updated front and rear bulkheads and bulkhead covers for easier belt tension and diff height adjustment. Also included are improved anti-roll bar mounts for reduced play, an updated inner servo mount that allows for proper LiPo battery spacing, a single piece motor mount with chassis flex adjustment and last but not last a centre carbon fibre brace to adjust pitch flex.

View more images here

March 16, 2018

T-Works D817 stainless steel front chassis protector

T-Works have released a new stainless steel front chassis protector for the HB Racing D817 and D817 Ver.2 off-road buggies. The set includes two precision-cut front skid plates that are a direct fit and made to protect the front end of the chassis from becoming excessively scratched or damaged on abrasive surfaces.

View another image here

March 15, 2018

Xray teasing electric-powered RX8 1/8th EP kit

Xray’s own Martin Hudy has shared the image of a prototype RX8E 1/8th electric on-road car on social media. The car is based off of the nitro-propelled RX8 and seems to use a drop fit electric conversion consisting of an updated radio tray assembly that takes two 2S shorty LiPo batteries and the speed controller while the motor mount houses an 1/8th-class motor with incorporated fan mount. We bring you more information on the subject as it surfaces.

Source: Xray [teamxray.com]

March 15, 2018

X-Grip 2S LiPo charge harness

European X-Grip distributors Mikimodel have introduced a new balance harness for 2S LiPo batteries. The pre-wired charge cable uses a protective sleeve to bundle the wires, it comes pre-soldered with industry-standard bullet-type connectors, a 2mm balance plug and XH balancer port.

Source: Mikimodel [mikimodel.net]

March 15, 2018

Answer RC D817 carbon arm stiffeners

Coming from Answer RC and made for HB Racing’s D8 series of buggies, such as the D817, D815 and D812, are carbon fibre arm stiffeners. The purpose of the carbon arm covers is to stiffen the arm and give a less flexible suspension set up and reduce traction a little. Ideal in high grip situations or to tune the handling of the car. These UK-made items vary in several ways to the standard HB items and Answer RC’s other own brand items in so far as they do not use countersunk holes for the securing screws giving a two fold benefit. No countersunk gives a stronger securing surface and by virtue of not being countersunk they are now not sided so that they can be flipped and used either side meaning if drivers have a tendency to damage one side they don’t end up with a collection of carbon covers for the alternate side. Another problem faced by some users is that the stock 2.5mm screws can pull out from the arm over time. Included with each set are 10 x 3.0mm screws as well as the 2.5mm screws which allow re-use of the arm even when the screw threads have become damaged in the arm. Also included is a 2.5mm drill bit which is ideal for opening the stock hole up if going straight to 3.0mm screw fitment. The arm covers are available separately for the front or the rear of the buggy.

View the rear arm stiffeners here

March 15, 2018

Serpent Project 4X Evo 1/10th touring car kit

Following extensive testing and several teasers, Serpent have officially announced the release of their new Project 4X Evo 1/10th 4WD electric touring car kit. The car makes use of the proven 4X platform but features several updates and improvements to further improve durability, performance and ease of maintenance. On the chassis side of things the Evo variant comes with a vertical top deck for less tweak issues, the chassis received an update to make for better flex characteristics and the new motor mount offers improved flex control. The suspension compartment features bigger heave dampers that hold more oil and utilise larger springs while fixed length moulded pull rods make setup more precise and convenient. New to the Evo are also lower mounting positions foe the RRS links, updated front and rear brackets improve durability, a blade-less front spool makes for better performance as do improved centre shaft holders. Last but not least come an updated steering system for a more linear feel, as well as new front and rear bumpers for easier access and improved performance. The kit will hit stores by end of March.

View more images here

March 15, 2018

PSM X1’18 battery positioning system

PSM have introduced their new battery positioning system for the Xray X1’18 formula car. This battery positioning system was designed to hold the battery securely in place while maintaining the option to move it forward and backwards in order to fine-tune the weight bias. In addition PSM have added the possibility to hold it down with the included O-ring to make battery changes easy while because of its special design, the battery mount will not affect the chassis flex at all. Manufactured from PSM’s proven quality carbon fibre and including all necessary hardware, the assembly weighs in at only 9 grams in total.

View another image here