Red RC » 1up Racing

December 12, 2022

1Up Racing UltraLite 30mm High-Speed Alu Fan

1Up Racing has introduced their new UltraLite 30mm High-Speed Aluminium Fan with integrated guard and optional Brass Chassis Mount. The fan sports a short 30mm cable with basic 2-pin connector that works with many speed controls and they also include a 200mm extension cable with JR connector should you want to plug it into your receiver or hard-wire the fan. They have cover nearly mounting solutions with included 2.5x6mm and 3x6mm screws. The perfect compliment to the new high-speed fan, is a Brass Chassis Mount allows you to easily mount the fan to nearly any car and keeps the weight as low as possible for improved centre of gravity helping to increase stability and improve corner speed on any surface. A channel runs under the fan to keep your wiring neat and again, as low as possible. Simply use servo tape to mount this to your chassis and use the two included button head screws to mount the fan. Rather than rigid mounts that screw to the chassis, the use of servo tape helps dampen vibrations improving the life of the fan as well.

View fan specs & more image here

October 31, 2022

1up Racing Pro Duty Lockdown Head titanium screws

1up Racing has added to its line of Pro Duty Titanium, with these new Lockdown Head screws. When you’re looking for added security, the Pro Duty Titanium Screws with Lockdown Head are just what you need. Perfect for high-demand areas that typically use a screw and washer such as motors, servos, body accessories and so on. Replace the bulky setup with these extra-sleek Lockdown Head Screws for incredible strength, weight savings and professional look. After years of testing samples, 1up Racing has sourced the best machinists and aerospace grade 6AL4V (Grade 5) titanium available. Each screw is cut by CNC lathe ensuring the best strength and finish possible. All 1up Racing Pro Duty Titanium Hardware is made to strict standards. Available in M3x6mm, M3x8mm, M3x10mm and M3x12mm lengths!

Source: 1up Racing [1upracing.com]

October 15, 2022

1up Racing Forged Carbon Fibre Pit Board

1up Racing has released this Forged Carbon Fibre Pit Board. At 390mm x 490mm it is the perfect size to work on just about everything with Ryan Cavalieri loving it for his 1:8 Buggies and Truggies. It’s perfect for Joe Pillars’ 1:10 Buggies and Randy Caster’s Touring Cars. At 5mm thick the Forged Carbon Fibre Pit Board is rigid and won’t sag or conform to uneven surfaces even with heavy cars. It features rounded corners and is finished with chamfers on top & bottom so there are no sharp edges and is topped off with a bright white 1up logo. Forged Carbon Fibre sheets typically have a lot of surface variations but 1up were able to identify the source of the issue and worked hard with their carbon fibre professionals to make 1up Pit Boards as flat as possible. Our production boards are the result of over a year and a half of testing multiple samples and while the surface may still show some variations, they are small and won’t affect getting a properly set up car. The 1up Racing Forged Carbon Fiber Pit Board is as much a status symbol as it is a pit board, and it’s only available at Pick1up.com.

View image another image board here

August 30, 2022

1up Racing UltraLite 3 Wire Organiser

Randy Caster’s 1up Racing has released this UltraLite 3 Wire Organiser which is the perfect way to dress up your wiring job without adding unwanted weight to your chassis. The lightweight aluminium organiser fits most 12-14ga wire up to 4.1mm OD and weights only .59g.

Source: 1up Racing [1upracing.com]

August 9, 2022

Inaugural ‘1up OC Throwdown’ – Report

This past weekend was an inaugural event for 1up Racing at Cal Raceway in Orange County CA called the OC “Throwdown”. It gathered racers from up and down California and San Diego reaching a mere 120 entries. This was an open tire event for TC which enabled racers to choose best tire choice. The racing format was open and controlled practice on Friday, Saturday with early morning seeding followed by three qualifiers. The TQ was determined by a qual points system. Sunday was triple mains.

In the modified division, on Saturday, it was Team Mugen driver young phenom Jacob Cruz who set the Top Seed for qualifying with an impressive 3 Lap time result. Leading up to Q1, it was Team Awesomatix driver Lex Tyler who took 0 points using Team Powers 36V2 tires with Cruz in 2nd using Team Solaris 36J tires and Team Associated driver Kyle Klingforth in 3rd using Team Solaris 36V2 tires.

Continue reading race report here

June 29, 2022

1up Racing Cruz Missile outdoor tire additive

Introducing the new 1up Racing Cruz Missile outdoor tire additive.. 1up have tested extensively with 1up Racing Factory driver Jacob Cruz to find the best outdoor tire additive across a range of surfaces, temperatures and grip levels. Cruz Missile tackles them all and is capable of setting the fastest laps with feel and grip that remain consistent over a full run. Supplied in a handy bottle with foam applicator.

Source: 1up Racing [1upracing.com]

June 17, 2022

1up Racing Pro Duty black nitride coated turnbuckles

Compliment your race machine with a set of genuine 1up Racing Pro Duty turnbuckles. 1up have selected the best possible grade 5 6AL4V raw titanium so they can use less of it for an ultra lightweight and sleek design. A Pro Duty 3.5mm turnbuckle is 24% lighter than an AE kit 3mm turnbuckle and 51% lighter than a TLR kit 3.5mm turnbuckle. Each Pro Duty turnbuckle is hand polished before receiving it’s Black Nitride coating, the end result is two stunning finishes in one. Available in sets for all the major 1//10th buggy models.

View another set here

June 10, 2022

1up Racing Pro Duty titanium servolock screws

Keep your servo in its place with 1up Racing Pro Duty titanium servolock screws. These CNC machined Grade 5 Titanium screws feature an oversized head and wide neck for a snug fit in most common 1/10 servos to help ensure your steering or throttle points won’t shift during hard collisions. Pro Duty Titanium is as good as it gets. You can expect these to withstand any abuse thrown their way and look great while doing it. The ultra-sleek head design removes as much unnecessary material as possible for an unbeatable look and superior weight savings.

Source: 1up Racing [1upracing.com]