Red RC » All Mod

December 10, 2007

All Mod clutch tool

MID in Germany have announced the release of the All Mod clutch tool, that we showed in pre production form 2 weeks ago. Designed to work with the Speed 2.5 buggy clutch and Speed 2.5/28 truggy clutch, the tool helps the user mount the shoes by making it simple to pop the shoe springs into place. This is done by putting the shoe onto the flywheel pin, place the tool over the end of the crankshaft and turning it anti-clockwise, while pushing, to remove them again just do the same but pull.

Source: MID [mid-mugen.de]

November 29, 2007

All Mod Heavy Load clutch bells

MID in Germany have announced the released of two new clutch bells for use on the All Mod Heavy-Load clutch system. Previously only available in 13T, 14T and 15T, the new 28mm diameter steel bells are now sold in 16T and 17T, and both are now available to buy.

Source: MID [mid-mugen.de]

November 28, 2007

Vita Tuning clutch tool

Vita Tuning from Germany has created this handy clutch assembly and disassembly tool, and will be made available under the All Mod and Reckward Tuning brand names. Designed to work with the Speed 2.5 buggy clutch and Speed 2.5/28 truggy clutch, the tool helps the user mount the shoes by making it simple to pop the shoe springs into place. This is done by putting the shoe onto the flywheel pin, place the tool over the end of the crankshaft and turning it anti-clockwise, while pushing, to remove them again just do the same but pull.

Click more to see the All Mod version… content

September 24, 2007

All Mod Support Spacers & Clutch plate

German after market parts maker All Mod have released 2 new products to their range of general and Mugen parts. First up are these engine support spacers for 1/8th scale buggies that when mounted lift your .21 motor by 1mm and this allows you to run the All Mod MSS 28 heavy-load clutch normally meant for use on .28 motors. Also new from All Mod is an aluminium clutch plate for use with the Mugen MTX and MRX range of cars that aids the engagement of the clutch for better power delivery.

Click here to see the clutch plate… content

August 20, 2007

All Mod MSS 28 Heavy-Load clutch

New from German after market brand All Mods, is this heavy duty high performance clutch system for use in truggies, called the MSS 28 Heavy Load. This 3 pin system has been race proven in its buggy form and has now been strengthened and optimised for use in this bigger class. The system uses spring loaded fly weights, which are available in aluminium or carbon, and the way that the whole system is mounted to the flywheel ensures consistent hassle free performance. Also released for use with this clutch system is 3 optional 28mm diameter clutch bells that are available in 13T, 14T & 15T.

Source: MID [mid-mugen.de]

July 12, 2007

M Mod hollow 2-speed Mugen Shafts

Released by MID under the M Mod brand are these 2 lightweight 2-speed gearbox shafts for use on the 1/8th scale Mugen MRX4 and 1/10th scale Mugen MTX4. Made from special hardened and precision-polished metal, these shafts are very stiff so are resistant to bending, even under extreme force, and because they are hollowed out they have now 20% less rotating mass.

Source: MID [mid-mugen.de]

May 18, 2007

All Mod Air Filter carrier update

All Mod Airfilter carrier

MID, the Mugen importers for Germany and makers of All Mod parts, have announced that their off road air filter carrier, that we showed you previously, will now come with the foam filter included as standard. They have also announced the sale of spare foam filters in 2 different sets, one with 2 external filters and 1 internal filter and another set with 6 external filters and 2 internal filters. Available now.

Source: MID [mid-mugen.de]

April 12, 2007

M Mod parts for MBX5 and MTX4

M Mod Wishbone mount

We have shown you lots of parts from M Mod before, as well as All Mod, and today we have more parts to show you, this time only for Mugen. The first up, which you can see above is a rear lower wishbone pivot point for the MTX4 that has been made out of the trademark grey anodised aluminium and adds to the strength required around this area in the event of an impact. Also available from M Mod, for the MBX5 and the MBX5-T, is a part that combines the upper servo saver mount and the upper rear side front suspension pivot point in one part which adds greatly to the strength and stiffness of this entire area.

Click here to see the MBX5 part… content