Red RC » Answer RC

March 28, 2018

Answer-RC D8-series short rear shock tower

Coming from Answer-RC is a short carbon fibre rear shock tower for the HB Racing D8 series of buggies such as the D817, D817v2, E817, E817v2 and the D815. The shock stay is made from 5mm carbon rather than 4mm and has pockets machined for shock mount studs and camber link studs to keep the fitment the same. Using the short tower, in combination with #HB67289 shock bodies will lower the overall centre of gravity for reduced chassis roll at high cornering speeds. In addition it is 6 grams lighter than the standard shock tower.

Source: Answer-RC [answer-rc.com]

March 22, 2018

Answer-RC S35-3 series carbon fibre arm stiffeners

Answer-RC from the UK have introduced front and rear carbon fibre arm stiffeners for the SWorkz S35-3 series of buggies and cars. They are made of thicker 1.5mm carbon fibre and include 6mm screwed rather than 5mm fasteners. They come separately for the front and the rear of the vehicle and fit the S35-3 platforms including the S35-3, S35-3E, S35-3GT and S35-GTE.

View the rear arm inserts here

March 15, 2018

Answer RC D817 carbon arm stiffeners

Coming from Answer RC and made for HB Racing’s D8 series of buggies, such as the D817, D815 and D812, are carbon fibre arm stiffeners. The purpose of the carbon arm covers is to stiffen the arm and give a less flexible suspension set up and reduce traction a little. Ideal in high grip situations or to tune the handling of the car. These UK-made items vary in several ways to the standard HB items and Answer RC’s other own brand items in so far as they do not use countersunk holes for the securing screws giving a two fold benefit. No countersunk gives a stronger securing surface and by virtue of not being countersunk they are now not sided so that they can be flipped and used either side meaning if drivers have a tendency to damage one side they don’t end up with a collection of carbon covers for the alternate side. Another problem faced by some users is that the stock 2.5mm screws can pull out from the arm over time. Included with each set are 10 x 3.0mm screws as well as the 2.5mm screws which allow re-use of the arm even when the screw threads have become damaged in the arm. Also included is a 2.5mm drill bit which is ideal for opening the stock hole up if going straight to 3.0mm screw fitment. The arm covers are available separately for the front or the rear of the buggy.

View the rear arm stiffeners here

September 20, 2017

Answer RC 1/8th polycarbonate off-road rear wing

Coming from Answer RC is their new polycarbonate rear wing for 1/8th off-road vehicles. Manufactured from high-quality 1.0mm material the wing is both lightweight and strong, making it ideal for nitro and electric classes. The kit includes a moulded plastic gurney flap, a centre dam section and mounting hardware.

Source: Answer RC [answer-rc.com]

May 19, 2017

Answer RC D8-series carbon fibre & alloy option parts

UK company Answer RC has expanded the range of option parts for the HB Racing D8 series of off-road and on-road vehicles. First up is a carbon fibre Ackermann plate that has a second hole set further back than stock to allow for an alternative steering Ackermann set up. The plate is cut from 4mm carbon fibre and it is usable on all D8 series kits including the D817, E817, RGT8 and even the older spec kits.

Continue reading here

March 30, 2017

Answer RC introduce new D8 series option parts

UK company Answer RC have introduced a range of new option parts for the HB Racing D8 series of kits. First up are front and rear carbon fibre arm covers whose purpose is to stiffen the monocoque arm and give a less flexible suspension setup while reducing traction a little bit. The covers are ideal in high-grip situations or to tune the handling of the car and they come as separate sets for the front and the rear of the D817, E817, D815, D812 and RGT8.

Continue reading here

June 6, 2014

Answer RC S350 & MBX6/7 alloy CVD axles

Answer RC re-release their own line of aluminium CVD axles for the S-Workz S350, Mugen MBX6 and MBX7. Available as wheel or centre CVD axle, the parts are CNC machined from 7075 aerospace quality aluminium, they come red anodised and offer multiple holes for the drive pin meaning that as the fit becomes sloppy they can simply be rotated round to the next set of holes. The axles are made for reduce the overall rotational mass of the drivetrain resulting in quicker spool up, reduced braking time and sharper handling.

Click here to view the other new part

January 15, 2013

Answer RC RC8.2 spring cups

From Answer RC, these newly developed spring cups for the Associated RC8.2 series make a lost shock spring perch a thing of the past. By using a longer body, the spring holds over a greater area allowing a more precise and secure fit. Supplied in a pack of 4 pieces.

Source: Answer-RC [answer-rc.com]