Red RC » Cox

November 15, 2018

RC-Cox traction compound applicator brushed pen

PPM RC Racing have introduced the RC-Cox traction compound application brushed pen. The tool was developed to make traction additive application easier as the pen is simply filled with the designed tyre sauce, doing away with the need to use the brush applicator many compounds come with. The applicator ensures an even layer of traction compound without dripping issues as they are associated with brush application. The pen is usable with Mighty V3 compound and it is available now.

View more images here

August 27, 2018

RC-Cox IF14 low roll centre suspension mounts

Coming from RC-Cox and made for the Infinity IF14 touring car are 0.5mm low roll centre suspension mounts. Available in -40.0, -44.5 and -46.0 settings the mounts lower the inner suspension pins by 0.5mm compared to the standard parts for increased front traction and more on-power steering. The suspension hangers come machined from aluminium and they are black anodised and sport red colour edge details for looks.

View the other suspension mounts jere

July 19, 2018

RC-Cox IF14 alloy steering bellcranks & posts

Coming from RC-Cox and made for the Infinity IF14 touring car are aluminium steering bellcranks as well as a set of chassis-mounted steering posts. The bellcranks are machined from high-quality 7075-T6 aluminium and they come black anodised and with red edge details for looks. The ball-raced bellcranks improve steering precision and stability for increased response while also allowing for greater steering throw angles. Also new are aluminium steering posts for the chassis-mounted steering configuration. Like the bellcranks, the posts are machined from high-quality aluminium and a red surface treatment and laser-engraved markings make the parts stand out. Using them will increase steering emphasis especially when used in combination with above steering bellcranks. Both parts are available as separate sets.

View more images here

July 16, 2018

RC-Cox T4 22.5g centre chassis weight

PPM RC Racing have introduced the new RC-Cox 22.5g centre chassis weight for the Xray T4 2018 and 2017 kits. Made from brass and coming with a shiny finish and a laser-etched RC-Cox logo, the weight looks cool and is easy to install, all while helping to add overall weight when needed. The part can help to gain traction in low-grip conditions and it also acts as a battery stopper, ensuring the LiPo pack will not make contact with the front belt.

View another image here

July 5, 2018

RC-Cox touring car body height adjusters

Coming from PPM RC Racing are the new RC-Cox touring car body height adjusters. The set included four 6mm inner diameter aluminium thread sections and four height adjustable alloy platforms that allow to finely tune body height and rake. The platforms are rubber retained to ensure the setting stays the same over time and the set is available in orange, red and black colour including mounting hardware.

View more images here

May 15, 2018

RC Cox introduce new T4 option parts

Coming from RC Cox and made for the Xray T4 are several new option parts. Starting with the Xray specific ones, first up is a front low FF suspension mount with optional brass insert. The low specification mount lowers the front suspension pins which improves the car’s rotation in corners while the 8g add-on brass weight allows to fine-tune the car’s weight balance, making it easier to drive. It easily attaches using a single screw for on-the-fly setup changes.

Continue reading here

March 16, 2018

RC-Cox T4’18/17 rear alloy 0 degree C-hubs

Coming from PPM RC Racing are the RC-Cox aluminium zero degree rear C-hubs for the Xray T4’18 and ’17 touring cars. The hubs were designed for the use with Xray’s ARS reactive rear suspension system where they replace the standard composite hubs with stronger and less flexible alloy items. The RC-Cox hubs are machined from 7075 aluminium, they come black anodised and including suitable bushings and shims.

Source: PPM RC Racing [ppm-rcracing.com]

June 19, 2017

RC-Cox 5mm LiPo battery safety plugs

PPM RC Racing have introduced the new RC-Cox 5mm LiPo battery safety plugs. Made from a soft material the plugs were designed to cover the unused openings of through-type LiPo battery connector tubes, keeping them from becoming dirty and damaged while also avoiding putting the battery in the car the wrong way around which can result in short circuits during hectic plug in routines. The plugs are easy to remove yet strong enough to not fall off even when the going gets tough and they come in sets of ten, enough to outfit five 5mm connector battery packs.

Source: PPM Racing [ppm-rcracing.com]