July 10, 2014

RPM ECX 2WD oversized front spindle blocks

RPM ECX 2WD oversized front spindle blocks

RPM introduce oversized front spindle blocks for the ECX line of 1/10th 2WD vehicles such as the Torment, Boost, Ruckus and Circuit. They make use of (optional) larger and thus more durable 5x11mm bearings and are made to improve durability and precision compared to the stock spindles thanks to their design and the use of RPM’s nylon material. The parts are a direct swap for the stock spindles and retain the stock geometry of the suspension. All that is needed are four 5x11x4mm ball bearings and you are good to go.

Source: RPM [rpmrcproducts.com]

April 9, 2014

RPM Torment, Ruckus & Circuit front A-arms

RPM Torment, Ruckus & Circuit front A-arms

RPM introduce front A-arms for ECX’s Torment, Ruckus and Circuit vehicles. Moulded in RPM’s renown nylon material the suspension arms are of an updated design to make them beefier than the kit arms in order to further improve durability and survivability. Offering tighter tolerances at the same time they also make for improved precision. The arms are a direct replacement and available from end of April.

Source: RPM [rpmrcproducts.com]

September 19, 2013

ECX Torment & Ruckus 1/18 4WD RTR trucks

ECX Torment & Ruckus 1/18 4WD RTR trucks

Horizon Hobby introduce the ECX Ruckus and Torment 1/18 scale 4WD ready-to-run trucks. Both base on the same composite tub chassis with 4WD shaft drivetrain, long suspension arms and oil-filled shock absorbers. Tough gear differentials help to put the power on the ground. While the Ruckus mimics a monster truck with huge tyres and pick-up body shell the Torment comes with a short course truck body and replica wheels and tyres. The RTR sets include a 2.4GHz radio system, waterproof receiver and speed controller unit as well as all needed batteries and a charger.

Click here to view the specifications, features and more photos

July 18, 2013

ECX Torment & Ruckus brushless RTR trucks

ECX Torment & Ruckus brushless RTR trucks

Horizon Hobby introduce the updated ECX Torment SC and Ruckus MT RTR trucks that now feature a Dynamite brushless system. Both trucks are based on 2WD high-lift chassis with huge ground clearance, they feature long suspension arms with oil-filled shock absorbers and an upgraded gearbox with adjustable slipper clutch and metal gears in order to handle the new Dynamite 3300kv brushless motor. The trucks come factory assembled with pre-decorated body shells and including a genuine Spektrum DX2e 2.4GHz radio system, 7-cell 2400mAh NiMH battery and 45A brushless speed controller. Both the ESC and the Dynamite steering servo are splash waterproof to make sure the vehicles withstand all rigours of bashing.

Click here to view the features and more photos

Mibosport
TargetRC
VP Racing
T-Works