Red RC » Grid RC

November 13, 2013

Grid RC 4PLS drop down steering wheel

Grid RC has announced the pilot project to manufacture a drop down steering wheel for the 4PLS based on the previous released Sanwa MT4 offering. The company developed a specialised mounting bezel adapter that can be bonded to the radio case itself without any screws, thereby preventing the customer from voiding warranty from the radio manufacturer. The drop down steering wheel upgrade is fully CNC-machined, comes with a satin black finish and will work on both the 4PLS and the 4PL. More details can be found on Grid RC’s website.

Source: Grid RC [gridrc.com]

June 17, 2013

Team Grid BalancePro Zero

Team Grid have released what they claim is the most sensitive wheel balancer for touring cars. Touring car wheels are much lighter than off-road wheels and can benefit from even more precise balancing and the BalancePro Zero is the tool that can deliver the extra racing edge needed for modern touring cars. It uses a true parallel twin blade knife-edge balancing system to provide Zero friction balancing on its continuous contact area, that no other ball bearing based system can offer. Even balanced wheels from a bearing based balancer may still appear unbalanced on the BalancePro Zero. Ultra sensitive it can level perfectly on any surface on its three adjustable legs with the aid of a bubble level. Its balance rod is precision ground with an ultra light weight Delrin hub adapter and a finger guard to ensure total safety.

View another image of the system here

February 3, 2013

Grid RC drop-down adapter for MT4

Grid RC have released this CNC machined steering wheel drop-down adapter for the Sanwa MT4 radio that brings the steering wheel directly in-line with the throttle trigger. The Grid RC drop down is milled so that it matches the styling of the MT4 and takes only minutes to install. Once installed, the racer will benefit from a more relaxed and comfortable hand position.

Source: Grid RC [gridrc.com]

August 8, 2012

Team Grid TC6 Race Version servo mount

Team Grid release the Race Version servo mount for the Team Associated TC6 series of touring cars. Designed to allow for more chassis flex with the new generation of narrow chassis plates the mount uses only a single mounting point that floats the servo slightly above the chassis allowing natural chassis flexing. The mount is CNC-machined from aluminium and bolts onto the existing holes, allowing the linkage to move more freely by eliminating the sharp movement angle.

Click here to view a picture of the mount installed

June 2, 2012

Team Grid TC6 series belt tensioner

Team Grid release this belt tensioner for Team Associated’s TC6 series of touring cars. It is a drop fit solution and bolts onto the existing front tower shock tower holes. Made from CNC-machined and anodised aluminium it allows to run the belt looser and at the desired running tension and features a dual M4x 8mm bearing system that slides at an angle for a large range of adjustment.

View an image of the tensioner mounted here

May 26, 2012

Team Grid drop-in camber tuning kit

The Team Grid drop-in camber tuning kit enables vertical camber link tuning on the Associated TC6 and TC6.1 touring cars. This kit utilizes the existing holes on the front and rear shock towers for infinite vertical camber link ball tuning. Since most racers are using the #1, #3 and #7 camber locations on the stock towers, the Team Grid camber kit allows for the exact use of these camber holes along with the flexibility of the inverted ball link system, which provides added positive and negative vertical adjustments from these locations. The camber kit also includes an extra tuning hole between #1 and #7 for even more tuning capabilities. Any 3mm spacer from 0.1 up to 6mm can be used for all the tuning.

View an image of the kit mounted here

April 29, 2011

Grid RC BalancePro wheel balancer

The new BalancePro from Grid RC is designed for the 1/8 racing purist, that want an ultra accurate high-end wheel balancer. The Grid BalancePro uses a precision ground 4mm balancing-rod that rides on lubricate-free micro ball bearings, that is virtually near-zero friction. The micro ball bearings are ultra sensitive to even the slightest wheel imbalance. Racers can also utilize the three adjustable feet with the aid of a bubble level for further increased accuracy.

View more images of the BalancePro here

April 5, 2011

Grid RC Ve8 motor mount

Grid RC have released this new motor mount for the Hot Bodies Ve8. Designed to support the popular Neu/Castle and Tekin motors, it uses an eccentric style of mesh adjustment that allows precise mesh settings and when locked, holds it regardless of how hard the vehicle is driven. The ball bearing motor plate will support four mounting screws for most 1/8 motors and a special pattern for the Tekin that uses six holes. The Grid motor mount allows enough spacing so that the sensor cable can be used and the Grid custom top differential bulkhead plate is also included with the mount kit.

View the motor mount in place