Red RC » Hudy

May 24, 2018

Hudy aluminium clamping throttle servo arm

Coming from Hudy are two new clamping design throttle servo arms. They are cut from high-quality aluminium and are available in a standard or off-set design, the latter being necessary for some nitro vehicles. The ultra-durable design with dual M3 threads allows for secure throttle and brake linkage mounting and the arm’s clamping design ensures it stays in place even after the main mounting screw became loose. In addition the standard arm is also available with plain, non-threaded linkage mounting holes. The arms come black anodised and laser etched and they are available in 23T, 24T and 25T specification.

View the offset servo arm here

April 10, 2018

Hudy 1/10th & 1/8th scale Quick-Tweak Station

Coming from Hudy is their new Quick-Tweak Station for 1/10th and 1/8th scale cars. Precisely machined from aluminium and offering a lightweight design for effortless transportation, the tool helps to fine-tune the suspension tweak of on-road cars with the precise bubble level on the right hand side ensuring precise yet easy to check measurement. The station’s slidable cavities allow to adjust the tool to match the car’s wheelbase and adjustable feet make the station usable even in uneven working spaces. The ball-raced tool comes in a dedicated aluminium case and it is available from now on.

View more images here

March 29, 2018

Hudy 3mm/4mm & 3.5mm turnbuckle wrenches

Hudy have added two new turnbuckle wrenches to their already existing line-up. Available as dual 3mm and 4mm variant as well as single 3.5mm tool, the wrenches are made from high-quality Hudy spring steel and they are precision shaped and hand-ground for a perfect fit and minimal stress on the turnbuckle.

View the 3.5mm wrench here

March 29, 2018

Hudy introduce updated set-up book

Hudy’s popular on-road set-up book is now available in an updated version. The revamped 50-page brochure gives a comprehensive in-depth view on RC car setup and includes tips and tricks of the Pro drivers, helping to better understand parameters such as caster, camber, toe or roll centre to name just a view. The set-up book was updated with the help of Michal Milanowicz and it is available as a free PDF file here (direct download).

Source: Hudy [hudy.net]

March 28, 2018

Hudy bumper & body foam spacer set

Hudy have introduced their new bumper and body foam spacer set. Included are 155mm long self-adhesive strips of 1.5mm, 3.0mm and 5.0mm thickness that help to bridge the gap between the body shell and the chassis’ foam bumper. The result is less body deformation at high speeds, less body scrubbing in corners and also improved chassis protection in the event of a crash. The foam strip set is available now.

Source: Hudy [hudy.net]

March 21, 2018

Hudy clamping aluminium servo horns

Hudy have introduced their new clamping aluminium servo horns. Machined from high-quality 7075-T6 aluminium and coming black anodised the heavy duty servo horns are available in offset 1-hole as well as standard 2 or 3-hole specification and for 23T, 24T or 25T spline servos. The special design allows to access the clamping screw from above, making installation in tight surroundings easy. In addition to looking the part the servo arms will also improve steering response compared to standard composite servo horns.

View more images here

March 19, 2018

Hudy touring car tweak board set

Hudy have released a tweak board set for 1/10th touring cars. The tool helps to remove any tweak from the chassis and it utilises a lightweight chassis counter plate as well as a lightweight carbon fibre rod with aluminium caps, the latter is used to hold down the chassis on its shock towers after loosing the top deck screws. With the rod pressed down the screws will be tightened again with he result being a totally flat chassis, bulkhead and topdeck assembly. The tweak board set comes in a protective carrying bag for easy storage and transportation.

View another image here

March 12, 2018

Hudy 2.5mm ejector pivot pin & alternating pivot

Hudy have introduced a 2.5mm ejector pivot pin and 2.5mm alternating pivot for use with Hudy’s drive pin replacement tool to replace 2.5mm drive pins in drive shafts in addition to previously available 3mm version. One of the leading causes of ill-handling cars comes from improperly working suspension caused by drivetrain binding. In cars of all scales it is important to check and regularly replace the drive pins before they wear flat. A worn pin can cause inconsistent handling and poor overall performance. It is well known that drivers in the past have gone to great lengths to either replace their pins frequently or incur the cost of replacing the compete drive shaft.

Source: Hudy [hudy.net]