Hudy have released this aluminum shim for the XB4 which fits on the rear wheel axle, and the set-up system leans against the shim. For use with XRAY XB4 or any off-road car on which the set-up system cannot be inserted on the non-threaded part. The set-up system will then sit properly on the threaded area of rear wheel axles only.
Source: Hudy [hudy.net]
Hudy have released two new ultra thick oils for the gear differentials such as used in 1/10 electric and nitro touring cars. Now available in 500,000 and 1,000,000cst they are the thickest oils in Hudy’s already large range. Hudy Ultimate silicone oil is manufactured in Europe by a specialized silicone oil premium manufacturer and were exclusively created for Hudy. Each batch of ultimate oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch.
Source: Hudy [hudy.net]
New from Hudy is this support bushing for the company’s Bearing Presser tool. Designed for .12 engines with 18mm bearings, such as the new Novarossi engines, the bushing helps to extract defect bearings from the crank case.
Source: Hudy [hudy.net]
Hudy’s new range of progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Developed through extensive testing and racing experience, these racing springs were designed and precision-crafted to have a more progressive rate than standard racing springs. As the car enters the corner the spring is softer which generates more grip but as soon the car inclines the springs get stiffer and the higher corner speed is achieved. Available as a pair, the springs are individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values are recorded. Each spring is then matched with another spring of identical characteristics.
Source: Hudy [hudy.net]
Hudy profiTools are based on the highly-successful Hudy professional tools used by RC factory teams and World champions. Each tool has a special, CAD-designed tip made of Hudy Spring Steel to very precisely fit the corresponding fastener, allowing unmatched torque and long life. New lightweight, comfortable molded hollow handles with machined hubs are designed to allow easy tip exchange.
Source: Hudy [hudy.net]
Hudy introduce the exclusive edition of their transmitter bag. Sporting a compact size and full colour printed graphics the bag is made from high quality materials and comes with a comfortable rubber handle and padded walls. An elastic safety strap secures the transmitter while storage and transportation and large dual zippers male access quick and easy. Two exterior straps at the rear of the bag allow to mount the transmitter bag to most widely-used car carrying bags. A special wide elastic strap lets you attach the transmitter bag to your hand luggage when travelling.
Click here to view another picture
New from Hudy, these conical clutch washer springs offer more consistent clutch operation for maximum punch. When using the standard spring, after the clutch is set for the first time the spring becomes deformed over time and needs re-tightening. This new conical clutch washer spring set allows the clutch to retain its setting for a very long time without needing readjustment. Suitable for 1/8th and 1/10th clutches they are sold in a set of 0.4mm washers (8pcs) and 0.6mm washers (8pcs).
Hudy introduce the offset throttle servo horns made from CNC-machined aluminium. Offering more durability and precision than composite plastic items the servo horns sport a total of four pre-drilled holes with tapered M3 threads for easy linkage mounting and a strong connection of horn and linkage. Available in three different variants for all popular servo brands including KO Propo, Sanwa, Hitec and Futaba.
Source: Hudy [hudy.net]
