Red RC » Hudy

May 19, 2009

Hudy Quick Camber Gauge for 1/8th buggy

Hudy have released their quick camber gauge for 1/8 off-road cars, which allows for quick and easy camber checks for the most frequently-used wheel camber angles: 1, 2 and 3°. Lightweight, compact and easy to use it has been precision machined from premium-quality fiberglass material and individually inspected by special inspection tool to verify angle accuracy. Fine color printed for quick and easy recognition of camber angle it sports side cutouts to allow clearance for wheel axles.

Click here to see the tool in action

May 13, 2009

Hudy Quick Downstop Gauge tool

Hudy’s new quick downstop gauge tool is a one-piece highly-accurate tool for quick checks, which has an integrated support block that supports the chassis while the stepped scale indicates the downstop setting. Including a downstop range of 1.0mm – 6.5mm it has been CNC-machined from premium-quality lightweight duraluminium and is strategically machined to minimize weight without compromising strength or durability. The black elox-coating gives a smooth, long-lasting finish and stylish look, and the Hudy logo and scale are clearly and cleanly laser engraved.

Click here to see the tool in action

April 29, 2009

Hudy Euro pouch

Seen at the toy fair in February, Hudy has released their handy Euro pouch, perfect for carrying small personal items or coins and which has a cool & stylish look with full-color graphics. Manufactured from high-quality European materials, this pouch is compact and light. Lightweight nylon material with tough heavy-duty stitching for high strength and durability. A strong nylon draw cord is used for closing the bag and carrying.

Source: Hudy [hudy.net]

April 20, 2009

Hudy Quick-Tweak Station

Hudy have released their Quick-Tweak Station that allows you to quickly and easily check and correct tweak on your race car to help ensure proper, consistent handling. Suitable for 1/10th and 1/12th on-road cars thanks to its unique adjustable base plate system, its adjustable threaded support feet allow for quick & easy leveling. Rugged and lightweight base plates are CNC-machined from strong yet lightweight aluminum and black-coated for durability and stylish looks. Strategically milled-out cavities in the base plates make this tweak station much lighter than other similar products on the market and both left and right sides are identically weighted for perfect balance. Areas around the precision spirit level in the pivoting base plate are milled out to allow easy viewing from any position and laser-engraved track-width markings (160-220mm) are precisely & accurately engraved on the base plates. The center axle is specially ground to be perfectly straight & level with ends additionally hand ground for precision fitment into the manually-selected precision ball-bearings that are pressed into the base plates. The ball-bearings are degreased and lightly oiled with AeroShell 12T fluid for ultra-free and smooth operation. The Hudy Quick Tweak Station comes in an exclusive aluminum carrying case with pre cut foam inserts to allow easy & safe storage.

Source: Hudy [hudy.net]

April 9, 2009

Hudy 1/10 Touring Set-up wheels

New from Hudy are these CNC-machined premium-quality aluminium set-up wheels for electric and nitro 1/10 tourin, which allows for perfect, precise and repeatable set-up adjustment and tweak correction. Precision-machined to exacting tolerances, each alu set-up wheel in a set is perfectly matched. When checking tweak on a rubber-tired touring car, using standard rubber tires typically gives non-precise and non-repeatable measurements. Rubber tires are never perfectly rounded, so when checking tweak one tire can lift earlier than another but this does not always indicate a tweaked car. Tire roundness and insert weight is different from one tire to the next. Also when checking tweak on a foam-tired touring car, the differences between tires are even greater than with rubber tires. Each foam tire has a different diameter after each run due to tire wear, making it impossible to check for tweak because the tires can give very misleading results. In this case the alu set-up wheels are the best tool for checking tweak.

Click here to see the wheels mounted

April 1, 2009

Hudy Pan Car Ride height gauge

Hudy have released this highly-accurate precision stepped ride height gauge for checking the ride height of 1/10th & 1/12th scale pan cars. Stepped surfaces in the 2.6-5.6mm range have 0.2mm increments for fine adjustment. CNC-machined, premium-quality lightweight duraluminium is black elox-coating for smooth, long-lasting finish and stylish look. Laser engraved with Hudy logo and scale.

Source: Hudy [hudy.net]

March 25, 2009

Hudy Team Carrying bag

Hudy has released their light and ultra-versatile team carrying bag, which is large and spacious enough to carry your RC car, tools, set-up equipment and gear to any track with comfort and ease. All walls are cushioned with protective foam, keeping your equipment safe within and spacious side pouches are large enough to carry a full-size set-up board. Heavy-duty zippers provide quick and easy access while a special pull-out tool tray fits in the top zippered compartment, held in place by Velcro fasteners. The tool tray has elasticized bands to keep a wide range of tools in place.

March 9, 2009

Hudy Alu nuts for Set-up triangle

New from Hudy, for use with all of their set-up systems, are these alu nuts for the set-up triangles. These CNC-machined aluminium nuts allow for quick & easy assembly and dis-assembly and have a knurled surface which provides easy grip. This removes the need for a tool when assembling the setup system. Sold in a set of 4 pieces.

Click here to see them being used