Red RC » Hudy

February 3, 2020

Hudy ultra thin double-sided tape

Coming from Hudy is their new ultra thin double-sided tape that is perfect to mount receivers, speed controllers or balance weights. The tape comes in 140x50mm strips and due to being ultra thin it allows to place electronics much lower compared to standard thickness tape, which not only looks a lot neater, it also helps to lower the overall centre of gravity. The tape features extra-strong glue, it is yet super easy to remove and it comes in packs of five pre-cut stripes.

View another image here

January 31, 2020

Hudy air filter sealant

Hudy have introduced their new air filter sealant, a chemical that was developed for the use between the sides of the foam filter and the plastic part of the filter to perfectly seal the contact area, ensuring no dust will pass through. The sealant is usable with all foam air filter elements, it is easy to apply and long lasting, ensuring maximum protection for the delicate engine internals. The sealant should always be used in combination with a high-quality foam air filter oil.

View another image here

January 29, 2020

Hudy adjustable camber gauge 110mm

Coming from Hudy and hot on the heels of their recently introduced adjustable 80mm camber gauge is a 110mm variant for 1/8th buggies and GT cars. CNC-machined from premium-quality aluminium the gauge is ultra-precise and super accurate with tight tolerances, precise laser-etched markings and solid construction. The tool is extremely durable and wear resistant while still being of compact size and a lightweight design. The black-coated gauge is available from now on.

Source: Hudy [hudy.net]

January 28, 2020

Hudy adjustable camber gauge 80mm

Coming from Hudy is their new adjustable 80mm camber gauge ideal for 1/10th on-road cars and buggies. CNC-machined from premium-quality aluminium the gauge is ultra-precise and super accurate with tight tolerances, precise laser-etched markings and solid construction. The tool is extremely durable and wear resistant while still being of compact size and a lightweight design. The black-coated gauge is available in two sizes of 80mm and 110mm to choose from for various RC car sizes and scales.

Source: Hudy [hudy.net]

January 24, 2020

Hudy Exclusive radio winter bag & heat pad

Hudy have introduced their new must have for running in cold weather conditions, their Exclusive radio winter bag and heat pad. The winter bag for right-handed drivers will keep hands warm no matter the outside temperature thanks to the reusable heat pad. The ultra-lightweight, super-soft bag features extra-large interior space for maximum comfort while handling the transmitter, and the smart design incorporates an externally-accessible pocket for exchangeable and reusable heat pad that generates extra heat for a minimum of 30 minutes. The sleeve is produced from even softer material for maximum tension-free feeling.

Continue reading here

January 13, 2020

Hudy 70mm to 140mm off-road droop gauge

Hudy have introduced their new 70mm to 140mm droop gauge for 1/8th and 1/10th scale off-road cars. The professional droop gauge makes it easy to check and adjust the suspension droop in a range of 70mm up to 140mm by simply sliding the tool on the upper shock mount nut and reading the droop value using the lower shock mount screw. Machined from aluminium and coming black anodised and with laser-etched scales and logos, the gauge is easy to read and it is usable with all 1/8th and 1/10th scale off-road cars.

View another image here

December 16, 2019

Hudy professional 17mm bulkhead alignment tool

Hudy have introduced their new professional 17mm bulkhead alignment tool for the Xray T4 2020 touring car. The alignment tool is placed between the left and right bulkhead using the included steel shafts. With the block and pins in place the driver can loosen and retighten both the lower bulkhead mounting screws and also the upper clamps and shock towers for perfect alignment of all parts. After all the parts are straightened up, the pins and block will be removed, the diff or spool installed and the bulkhead upper clamps installed. The result is a more efficiently running drivetrain and thus overall improved performance while countering chassis tweak. The tool is machined from aluminium and it comes black anodised for looks and wear.

Source: Hudy [hudy.net]

December 3, 2019

Project RC Hudy starter box easy start inserts

F.V.S.S. Racing have announced the release of the Project RC easy start platforms for the popular Hudy nitro engine starter box. The inserts are designed to perfectly match with the chassis outlines to make for self-centring ability and thus easier, faster and more convenient engine starting. The platforms are available for the most popular 1/8th and 1/10th on-road kits.

View another image here