Red RC » Kawada

July 8, 2008

Kawada LX Lipo packs & Balance Charger

New from Japanese firm Kawada are these new LiPo packs as well as a new LiPo balance charger. Similar to those recently shown to us by Speed Passion, these new LiPo packs comes in both a hard cased carbon look racing pack and a stick pack configuration complete with rounded corners as well as power cable and balancer connection. Both packs are 4000MAh, with the racing pack contain 30C cells and the stick pack only 20C. Also newly released by Kawada is a simple LiPo balance charger that lets you charge at 2.0A, 1.5A, 1.0A and 0.5A and can work with up to 4 cell 14.8 volt packs.

Click more to see the charger… content

June 25, 2008

Kawada Stepped Body Reamer

Japanese company Kawada becomes the latest company to release its own body reamer, with this rather nice example. Featuring a black anodised finish, the lightweight handle and included aluminium tip protector are stylish yet functional, with the unique element of this tool being the cutting tip. The reamer tip is slightly stepped so that you can easily and accurately open a hole to a desired size, while for ease of use either side of the reamer tip sports measurements in mm and inches.

Source: Kawada [kawadamodel.co.jp]

May 31, 2008

Kawada M300RSX 1/12th scale V2

Kawada have announced the follow up to their successful M300RSX 1/12th scale chassis, with the release of the Version 2. With most updates centred around the rear of the car, the new features include an updated 1/4″ rear ball diff, a new motor mount suitable for brushless motors and a new motor mount support that adds stiffness following the removal of the top carbon plate seen on the previous version. Finally, for improving the handling, there is a newly designed rear upper brace as well a high traction carbon fibre chassis plate.

Click here to see more photos… content

April 9, 2008

Kawada Ride height gauge

Japanese company Kawada have released this double function touring car and 1/12th scale ride height gauge. Made from black anodised aluminium, one side of the tool features measuring steps in 0.5mm increments from 1.0 – 10mm, while the other side features a continuous sloping face that can measure within the same range, but in more accurate 0.1mm increments. Featuring the Kawada logo on the side, it and the measurements have been lasered onto the tools surface which will be available for sale in mid April.

Source: Kawada [kawadamodel.co.jp]

October 29, 2007

Kawada M300 wheel axle spacers

Kawada have released some spacers for the rear axle of their M300, and other 1/12th scales with 1/4″ (6.35mm) axles. Made from aluminium they are sold in a set of 12 with 4 of each size, 0.5mm, 1.0mm and 2.0mm widths, and help adjust the rear track width of the car as shown in the picture above.

Source: Kawada [kawadamodel.co.jp]

October 16, 2007

Kawada M300GT 1/12th scale

Kawada have released some details of their latest roject, the M300GT, which is still in the concept stage at this moment. From what we can figure out, it features a 210mm wheelbase and is essentially a long wheel base 1/12th scale that appears to take 6 cell stick packa and will also kitted out with the company’s new 1/12th scale bodies. Expect it to be released in mid December, we will give you more details as we get them.

Source: Kawada [kawadamodel.co.jp]

August 10, 2007

Kawada 38mm tire cone

Following on from the release of the companys new large diameter wheel for their M300 1/12th scale chassis, comes this new tire cone from Kawada. The cone of course is for mounting foam onto the wheels and with the change in diameter for the wheel comes the change in diameter for the cone also, now 38mm. The picture above shows the prototype with the production version expected later in the summer.

Source: Kawada [kawadamodel.co.jp]

July 22, 2007

Kawada – New wheel for M300

Kawada - New wheel for M300

We wrote about the new Kawada wheels back in May when they were just CAD images, now over 2 months later and they have the final production samples which you can see above. These wheels are suitable for the company’s M300RSX 1/12th scale and they have a larger diameter than the original versions and are also made very true, for precise handling. Expect them to go on sale on the 25th of July.

Source: Kawada [kawadamodel.co.jp]