Red RC » KM Racing

June 12, 2009

KM Racing NT1 Solid axle & Turnbuckle wrenches

KM Racing have come with 2 new products, the first of which is this lightweight 2 piece solid front axle for the Xray NT1. The drive cups are now separate to the main aluminium axle and can be easily replaced when damaged, while the hollow centre of the main axle has been filled with Delrin increasing the strength of the axle without adding too much weight. Also new from KM are some handy turnbuckle wrenches that are suitable for both 4mm and 5mm turnbuckles and are available anodized in both red and grey.

Click here to see the turnbuckles

May 18, 2009

KM Racing Touring Car setup wheels

KM Racing have released this set of 4 setup wheels for use with 1/10th scale touring cars. Machined from aluminium, so lightweight, they are available anodised in red, blue and gun metal. Sporting a rubber o-ring around the circumference of the disk, the car will not slide around when checking settings and also wont scratch the surface its placed upon. The wheels offer a consistent wheel size for checking ride height and a flat side for measuring camber and toe settings.

Source: KM Racing [km-rc.com]

April 29, 2009

KM Racing NT1 Radio Tray mounts

New from KM Racing for the Xray NT1 are these aluminium radio tray mounts. Made from high quality 6061 aluminium, these new parts help to increase stiffness in this area and claim to improve the car’s overall stability. Sold in a pair, it includes both the left and right mounts.

Click here to see the parts

April 15, 2009

KM Racing Gas Foam tires

KM Racing have released their own line of racing foam tires for both 1/8th scale and 1/10th scale 200mm. Coming pre mounted on durable white rims, the 1/8th scale wheels use a 6 spoke design similar to the Kyosho wheels, while the 1/10th rims use a 12 spoke lightweight design. Made using high quality Italian foam, they are available in the usual range of shores.

Click here to see the other tires

February 9, 2009

KM Racing Imperial tool range

Similar to the tools released by KM Racing last September, these new additions to the range come in Imperial sizes. Fitted with special chrome hardened steel tool tips, the hollow lightweight handles are 18mm in diameter for better grip and have 4mm holes to be able to enhance the leverage using another tool tip. Available in .050″, .063″, .093 (in both normal hex & ball), as well as nut drivers in 3/16″, 1/4″ and 11/32″, all tools have the inch size engraved in large writing on the handle for easy identification and are supplied with the end cap as standard.

Source: KM Racing [km-rc.com]

November 21, 2008

KM Racing Foam tire range

KM Racing have released a complete new range of 1/10th scale foam tires. Available on either 2mm offset Kyosho rims or 0mm offset Velocity rims, the high quality Italian foam is sold in a wide range of shores for both the front and rear. The front and rears come in 35, 37, 40 and 42 shore.

Source: KM Racing [km-rc.com]

November 17, 2008

KM Racing V-One RRR Upper decks

KM Racing have released two new optional upper decks for the Kyosho V-One RRR 1/10th scale chassis. Made from carbon fibre, both feature a hexagonal counter bore design for locking the car’s fifth body post and both are supplied with a pair of fuel tank o-rings. The difference between the 2 is that one allows for the standard upright mounting of the throttle servo, while the 2nd enables it to be mounted in the lay down position for a lower centre of gravity.

Click more to see the other radio plate… content

October 31, 2008

KM Racing Carbon Pit Box

KM Racing have released this handy carbon pit box. Designed to fold away flat for easy transport and storage, when open the aluminium centre stand provides a place for your fuel gun and a range of tools necessary for in the pitlane. What gives the carbon pit box its name is the use of carbon fibre for the main central structure as well as the carrying handle, which not only looks great but is super lightweight too.

Source: KM Racing [km-rc.com]