Red RC » Kyosho

December 12, 2019

DE Racing 8ight-X & MP10 BumpSkids & rear skid plates

Coming from DE Racing are their new BumpSkids and rear skid plates for the TLR 8ight-X and Kyosho MP10 buggies. Starting with the BumpSkids, they combine a well functioning front skid plate with a refined front bumper to create the ultimate in protection, performance, and styling. As for the rear skid plates, like the front BumpSkids, these are ultra thin, they wear like aluminium and save the chassis from becoming overly scratched or damaged. They are sold in packs of three and use the original bulkhead mounting hardware.

View more images here

December 6, 2019

Kyosho MR-03Evo SP chassis set

Coming soon from Kyosho is their new MR-03Evo SP chassis set. It builds on the proven MR-03Evo that utilises separate receiver units to allow the use of Kyosho, KO Propo or Futaba transmitters for better car control and faster reactions while the included Speed House Speed 85 8500kV motor propels the car to enormous speeds. The SP version also comes with nickel-plates hex screws for cooler looks and more convenient maintenance, the MZW432 fluid-filled centre shock as well as a ball differential as standard. The kit is rounded out by a new front arm set that enables the driver to use 1, 2 or 3 degrees caster angle settings.

View a list of the key features and more images here

December 5, 2019

Kyosho Speed House Torx 10 brushless motors

Kyosho have announced the soon release of their all-new Speed House Torx 10 540-size brushless motors. The sensored motors were developed for high-performance competition use, offering high efficiency, a low weight and exceptional heat dissipation thanks to a highly machined case. Sturdy heavy-duty solder tabs and a rearward-facing sensor port round out the package. The 5.5T to 10.5T modified motors will come equipped with a 5.0×12.3×24.0mm rotor while the 13.5T to 21.5T stock motors are tuned using a 5.0×12.5×24.2mm rotor.

Source: Kyosho [kyosho.com]

November 29, 2019

7075.it Inferno MP10 closed switch cover

Made for the Kyosho Inferno MP10 1/8th off-road buggy is 7075.it’s closed switch cover. Machined from high-quality aluminium and coming with an anodised surface finish for wear and looks, the laser-etched part replaces the standard switch cover with a closed variant for all drivers that scrapped the standard switch over a DIY “plug” solution.

Source: 7075.it [7075.it]

November 21, 2019

Kyosho V-One R4 series V2 aluminium clutch bell

Kyosho have introduced their new V2 aluminium clutch bell for the V-One R4 series of 1/10th 200mm nitro on-road kits. Machined from high-quality aluminium and coming with a special hard-coated surface treatment, the small-diameter clutch bell offers a lower weight than the previous #VZW429 clutch bell for improved drivetrain efficiency while adding overall durability at the same time. The clutch bell is usable for kits such as the R4 Evo.2, R4 Evo, R4s II and R4s.

Source: Kyosho [kyosho.com]

November 20, 2019

Kyosho MP10T hard composite lower arms

Kyosho have introduced their new hard composite lower arms for the MP10T 1/8th scale truggy. Moulded from a harder-than-stock material the arms come in handy especially when running in high ambient temperatures or when racing in high to very high bite track conditions. Using the harder arms results in more precise handling as they do not flex as much as the standard kit arms, however they can take away some overall traction and stability in colder conditions. The arms come as separate pairs for the front and the rear of the truck.

View the hard rear arms here

November 14, 2019

Lunsford Ultima 4-40 titanium turnbuckles

Lunsford Racing have introduced their new Retro 4-40 turnbuckle set for the Kyosho Ultima re-release buggy. Machined in the USA from high-quality USA-made Grade 5 titanium the retro turnbuckles will give the re-release Ultima the ultimate vintage feeling while offering highest quality and cool looks. Included in the 6-piece set are front/rear camber and steering link turnbuckles.

Source: Lunsford Racing [lunsfordracing.com]

November 14, 2019

Kyosho Ultima RB7 brass balance weights

Kyosho have announced the soon release of two new balance weights for the Ultima RB7 buggies. First up is the 28g LDW rear weight that was designed to be mounted under the lowdown gearbox of the RB7 and RB7SS kits. Using the part will shift the weight balance toward the rear, increasing rear traction when running in low to high-grip track conditions. Also coming soon is the 32g battery weight that will slide under the battery, upping the overall weight when using standard or LCG shorty battery packs. The higher weight comes in handy in a variety of track conditions as it can calm down the ride over bumpy parts of a track while countering traction rolling on high-bite surfaces. The weight comes laser-engraved for easy identification and it is usable with both the RB7 and RB7SS.

View the under LiPo weight here