Red RC » Kyosho

November 7, 2014

Kyosho Plazma LM Nissan R90CP kit

Kyosho soon have a new bodyshell variant of the Plazma LM 1/12th scale chassis kit available. Joining the Toyota TS020, the Porsche 962 and the Mazda 787B is the 1990’s Nissan R90CP No. 23. Based on the Plazma Ra competition pan car the Plazma LM series of cars build on a long wheelbase chassis with conventional T-bar rear suspension, a single central shock and dual side dampers. The highly adjustable front suspension is directly taken over from the LM’s competition sibling as are many parts of the rear suspension including the adjustable ball differential. The car is useable with a wide range of battery configurations including 1S to 2S LiPo batteries and four to six cell NiMH battery packs and comes almost ready-to-run including a brushed G20 standard motor, pre-mounted high grip foam tires and the highly detailed Nissan R90CP body shell.

Click here to view more photos

November 3, 2014

Imbue 12mm brass shock pistons

Hot on the heels of the 1/8th scale brass shock pistons Imbue announce the release of 12mm 1/10th variants. The pistons are meant to improve bump handling, they make for plusher landings and smoother vehicle response. Initially available in 3×1.35mm hole configuration, the hole selection works well on both outdoor and indoor tracks, with tapered holes on one side to allow tuning for faster rebound or dampening. Included are standard and tight fit sealing bands for a perfect fit and to eliminate blow-by and friction. The pistons fit TLR, Associated, and Kyosho vehicles as well as and other brands that utilise a 3mm mounting shaft.

Source: Imbue [imbuemotorsports.com]

October 29, 2014

Exotek RB6 MM wing mounts & shock cartridges

Exotek have new option parts for Kyosho’s RB6 buggy available in the form of aluminium wing mounts for mid motor converted buggies as well as delrin big bore cartridge housings. Starting with the wing mounts, the parts made from 7075 aluminium are of a heavy duty design for extra durability while being light of weight at the same time. Threaded holes allow to mount the wing using low profile M3 screws, doing away with the need to use body clips. The mounts come red anodised to match with the remainder of Exotek’s Kyosho option parts.

Click here to continue reading

October 6, 2014

Kyosho MP9 coloured side pods

To match with their various colour MP9 receiver and battery boxes Kyosho soon have corresponding chassis side pod sets available. Given the photos Kyosho’s Yuichi Kanai released the pods come in orange, yellow, green and white colour to replace the standard black parts with more colourful ones. More information, such as availability, should surface soon.

Source: Kyosho [kyosho.com]

September 29, 2014

Kyosho Beetle 1/10th 2WD re-release coming soon

Following the re-release of the iconic Scorpion 2WD buggy Kyosho will soon also have the not-less desirable Beetle Off-Road Racer available for all of you who could not afford one back in the last century. Based on the same ladder frame chassis as the Scorpion the Beetle features a different tyre/wheel combination and of course the name-giving VW Bettle bodyshell. As with the Scorpion you can expect some redesigned and upgraded parts in the Beetle kit to make the kit usable with modern day electronics, but overall the distinctive 1980’s appearance will remain. We do not have definite information on a release date but it is understood that the kit, that was on show during the recent All Japan Hobby show, could hit the stores before Christmas!

Image: Hobbygarage RC [ameblo.jp/hobbygarage-rc]

September 26, 2014

More Tamiya & Kyosho news from Tokio

A bit earlier today we brought you first images of the Tamiya TRF419 and what appears to be the follow-up model of the Kyosho TF6 and now more images are available from this week’s All Japan Hobby Show in Tokyo. First up is Tamiya’s recently announced Raybrig NSX Concept-GT kit that will become available on the TB-04 shaft-driven chassis. What makes the kit stand out is once again Tamiya’s highly detailed polycarbonate bodyshell and the huge decal sheet to resemble the full scale Raybrig NSX.

Click here to continue reading

September 26, 2014

Kyosho working on updated TF6 touring car

While Tamiya officially announce a new electric touring car kit at this week’s All Japan Hobby Show, competitor Kyosho are currently a bit under the radar with a follow-up model of their ageing TF6 platform. The car on show in Tokyo sports a new shape chassis, updated front and rear bulkheads, a new motor and layshaft mount as well as what appears to be a floating battery mount that prevents the battery pack from affecting chassis torsion during cornering. Like the now-standard floating servo mounts the battery “floats” above the chassis, hanging in a carbon fibre brace that is connected to a sturdy aluminium piece which is mounted on the roll axis of the chassis. Also visible in the image is Kyosho’s idea of a reactive rear suspension that allows to adjust the rear toe-in gain or loss during cornering. We try to get more information on the car in question as we understand that the vehicle will be in use during the forthcoming IFMAR Electric On-road World Championships.

Click here to view another photo

September 17, 2014

Exotek 22 2.0 & SC6 carbon front shock towers

Exotek introduce two carbon fibre front shock towers for the TLR 22 2.0 and the Kyosho SC6 truck. Starting with the TLR part, the shock tower is made of 5mm high-quality carbon fibre and much stiffer and stronger than the original composite item resulting in a more consistent damper action. Extra machining reduces unnecessary weight while improving airflow through the shock stay at the same time. The tower fits both the 22 and newer 22 2.0. Also new and made for the Kyosho SC6 and RT6 is a 4mm front shock tower. Again made to improve shock action the part offers additional outer shock mounting holes for added tuning options while lower countersunk holes insure exact mounting and alignment which is critical for taller shock towers.

Click here to view more photos