Moto Obscura has released an aluminium front bulkhead for Team Losi XX models. This piece fits both 2WD Buggy and Stadium Truck vehicles, and features an internal pocket for optional brass weights to adjust weight distribution. Each bulkhead is machined from a billet of 6061-T6 aluminium and finished with a beautiful black anodised coating.
Source: Moto-Obscura [moto-obscura.com]
New from vintage racing accessories brand Moto-Obscura are these Aluminium 12mm Axle Stubs for the Team Losi XX4 4WD Buggy which won World Championship titles in 1999 and 2002. The 12mm front Axle stubs are the newest addition to Moto-Obscura’s track tested line of accessories for the Losi XX4. They allow you to run modern 12mm hex 4WD wheels with the stock universal joint driveshafts. If you are running MIP CVDs or LCD driveshafts, they also offer 12mm hex adapters. The axle stubs are machined from 7075-T6 aluminium alloy and feature a 10-32 thread just like the stock axles and comes as a set of two axle stubs.
Source: Moto-Obscura [moto-obscura.com]
Vintage racing accessories brand Moto-Obscura has released new Aluminium Bleeder Screw Shock Caps for vintage Team Associated vehicles featuring narrow bore shock absorbers. The product adds functionality and ease of maintenance for the vintage racer with their discrete bleeder screw for easy air free shock building. Machined from 6061-T6 aluminium, they are anodised in a neat black finish. These shock caps fit all Associated narrow bore shocks from the original RC10 gold pan all the way up through the B4.1, plus all corresponding Truck and 4WD buggy variants, and RC10 & Worlds Car re-releases. Sold as a set of two shock caps and includes bleeder screws, bleeder screw seals, and shock cap O-rings.
Source: Moto-Obscura [moto-obscura.com]
Moto-Obscura is branching into the modern racing market with their newest release of chassis weight plates for Team Associated’s B7 1:10 2WD Buggy platform. Coming in two different shapes, one is for mounting under the servo, and one is for under the ESC & Receiver. They are available in Brass, Stainless Steel, or Aluminium to fine tune the balance of your vehicle. These brushed metal weights are made in the USA and come with the necessary countersunk mounting screws.
Vintage racing accessories brand Moto-Obscura has released a new carbon fibre rear shock tower for the Team Associated RC10. Made from 3mm plain weave carbon fibre, it maintains the vintage look of your retro ride while simultaneously adding strength and function. The tower is styled after that of the RC10 Worlds Car, with four additional holes that allow the option of using wing mounts from the B6 series. Fits all original RC10 models, as well as re-release vehicles and the RC10CC Classic Clear Edition.
Source: Moto-Obscura [moto-obscura.com]
Moto-Obscura has announced their first of a line of vintage Schumacher parts with their Aluminium SACS front suspension pivot blocks. SACS (Schumacher Active Caster System) was a novel design that was an option on many 2wd buggies and trucks during the 90’s and early 2000’s. Conversions were even available for other brand’s vehicles as well like Team Associated’s RC10 buggy. Machined from durable 6061-T6 Aluminium Alloy, the SACS blocks eliminate the biggest weakness of the system by replacing the original plastic piece. The new aluminium part is beautifully finished with smooth black anodising.
Source: Moto-Obscura [moto-obscura.com]
New to Moto-Obscura’s portfolio of vintage racing accessories is their machined nylon front arms for Team Associated’s cult classic RC10 B2 buggy. These heavy duty arms are milled from tough Nylon 6/6 and feature thicker material in high stress areas. The milled out pockets reduce weight and make the arm appear more original at a quick glance, and the hinge pin holes are precision reamed for a friction free fit without excessive slop. These arms are available exclusively from Moto-Obscura.com in either natural white or black.
Source: Moto-Obscura [moto-obscura.com]
Specialists in parts for vintage RC racing, Moto-Obscura has released this carbon fibre car stand that looks just as at home in the pits as it does in a display case. This minimalist design is perfect for 1:10 vehicles, utilising rubber feet to protect the bottom of the chassis and to ensure that it does not slip. The dual carbon fibre plates are CNC milled to a gentle shape that is pleasing to look at while not drawing too much attention from the vehicle being displayed. Four 14mm holes add a subtle flair of style, and double as a shock rebuild stand. Designed with simplicity and practicality in mind, this display stand offers a perfect blend of functionality, aesthetics, and durability. Crafted to meet the unique needs of radio control enthusiasts of all types, this stand is a must-have for hobbyists, collectors, and racers alike. The overall height of the stand is 2.7” or 68mm.
