Coming from Hiro Seiko and made for the Sanwa M17 transmitter is a lightweight screw kit. Machined from 7075-T6 aluminium and available in five different colours the set will reduce the overall weight of the radio by nearly 6g while adding visual impact at the same time. The 19-piece screw kit is available in red, orange, dark blue, light blue and titanium silver colour.
Following their successful 1/10th 200mm World Championship winning campaign, Infinity has released a new optional hard chassis as used by their drivers during the Miami event. Featuring a stiffer rear section, this results in both increased traction and response compared to the standard IF15 kit chassis.
Source: Creation Model [creationmodel.net]
Xpress have introduced their new aluminium layshaft bulkhead for the Execute XQ1S and XM1S on-road kits. The part replaces the standard items for alloy pieces to increase rigidity when opting to run higher power motors. The alloy bulkheads will ensure the layshaft stays straight under hard acceleration and braking. The set includes two red anodised alloy bulkheads that are a direct replacement.
Source: Xpress [rc-xpress.com]
Coming from SWorkz and made for the S35-GT kit is a laydown shock tower conversion. The set includes 5mm Pro-composite carbon fibre shock extensions that attach to the front and rear lower arms, moving the lower shock mounting position further out by 15mm. Using the conversion will improve corner speed especially on high-speed tracks. Also included in the set are optimised front and rear carbon fibre shock towers to support the new suspension geometry and it is rounded off by suitable mounting hardware.
Following the “Nineteen” conversion kit for the Velox V10 1/10th 200mm nitro on-road kit, Shepherd now also announced the full Nineteen specification car kit. The car features a new rear axle geometry, making it more controllable when braking even under difficult track conditions or when hard braking is required. This was achieved by a wider rear lower wishbone distance and an updated upper wishbone mount with optimised upper camber link positions. The updated lower wishbone mounts are manufactured from high-quality 7075-T6 aluminium while the upper wishbone mounts are milled from high-quality German carbon fibre material. The lower wishbones have been completely redesigned to match the updated geometry and are moulded from high quality plastics. The rear anti-roll bar linkage is located slightly more to the outside of the wishbone for improved responsiveness and softer steering. Furthermore, the 7075-T6 aluminium chassis of the 2019 car has been optimised. Thanks to improved production and milling techniques and a slightly different layout, the chassis bends significantly less, even under heavy loads, which significantly increases its durability. An improved exhaust pipe holder makes the use of different pipe/manifold combinations of all manufacturers significantly easier and more comfortable and high-quality ball bearings with full metal seals complete the changes to the new car. The kit has already proven its capabilities by taking the 3rd place overall at the recent IFMAR 200mm Worlds in Miami, Florida is the hands of Shepherd pilot Edu Escandón.
T-Works have introduced new front and rear top decks for the Schumacher Cat L1 1/10th 4WD off-road buggy. Available separately the upper decks come in 2.0mm, 2.5mm or 3.0mm specification, allowing to fine-tune the chassis’ flex characteristics to your liking. The different thicknesses can also be mixed and matched for even greater influence on the front and rear chassis twist.
Source: T-Works [rc-tworks.com]
Coming from Arrowmax is their new 3.7V 8000mAh Si-Graphene series LiPo battery packs for 1/12th scale applications. The no compromise pack is of 60C/120C rating for high discharge rates in Modified and Stock racing, ensuring exceptional power supply even with power-hungry motors or on demanding tracks. The hardcase battery utilises 5mm connectors and it is available now.
Source: Arrowmax [arrowmax-rc.com]
Infinity has introduced an optional aluminium body mount spacer for their IF18 1/8th nitro on-road chassis. Used together with the optional 1-piece carbon mounting plate, the spacer offers extra body post stability and is available in both silver and red.
