Red RC » Brand

May 6, 2018

Schelle B6.1 Nova lockout set

Schelle Racing Innovations have introduced their new Nova buggy lockout set for the Team Associated B6.1 buggy. The slipper eliminator replaces the standard slipper assembly for a direct drive system with screw-on main gears in order to reduce rotation mass for improved acceleration. The B6.1 version is a new V2 design with its screw-on spur gears and it is easier to assemble, and works with both the B6.1 kit topshaft or the short direct drive topshaft. The lockout set sheds weight down to a bare minimum 2.3g and to weighs in at 4.6g total including the spur gear and the set includes a 69 tooth and a 72 tooth Nova Spur gear.

Source: Schelle Racing Innovations [schelleracing.com]

May 5, 2018

Schelle B6.1 front & rear carbon fibre shock towers

Coming from Schelle Racing Innovations and made for the Team Associated B6.1 series of buggies are a 5mm front gullwing arm shock tower and a rear low centre of gravity stay. The 5mm front tower is of a heavy duty design, however it matched the kit geometry and it is usable with the plastic tower guard that covers the optional wing mount locations. Also available is a thinner 4mm variant to match the flex characteristics of the standard kit tower. Last but not least comes the B6.1D low centre of gravity rear shock tower. It lowers the shocks for a low CG and more predictable rear suspension as this tower sits 2mm lower to the ground, and also gives racers the fine adjustment with tight hole spacing. The 4mm tower is a direct bolt-on to the B6.1D and it was designed for the use with 31mm shock body and short rod ends.

View more images here

May 4, 2018

JConcepts NT48.3 Finnisher body shell

Coming from JConcepts and made for the Tekno NT48.3 truggy is the new Finnisher body shell. The slight cab forward, raked windshield and aggressive stance highlight a performance oriented core while wide front hood scoop allows plenty of clearance for the unique Tekno NT48.3 shock geometry. The body incorporates a large centre fin which begins on the roof line and finishes just past the half-way point on the bed. Extended front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight while the supplied decals stand-out like an 18 wheeler. The body comes moulded from high-quality polycarbonate, including window masks and a decal sheet and it also fits and works with the ET48.3 electric truck.

View more images here<img src=

May 4, 2018

Surpass Hobby Rocket V4S & V4S sensored brushless motor

Surpass Hobby have introduced their new Rocket V4S sensored brushless racing and V4D drift motors. Build to comply with IFMAR, ROAR and BRCA rules the motors utilise a high-strength 7075 aluminium can with unique double colour V-routing design for a low weight of around 145g. The V4S also uses non-magnetic, hardened alloy screws to extract more RPM and power from the motor. Heavy duty rotors further up the performance of the motors that are available as 3.5T to 9.5T modified and 10.5T to 25.5T stock racing variants.

View more images here

May 4, 2018

2018 Arrowmax Cup Race T-shirt

Arrowmax have introduced their new Arrowmax Cup Race T-shirt for the 2018 season. The shirt is made from 100 percent cotton material and it sports the Arrowmax Race Cup logo on the front with Arrowmax and Dash TLab logos on the rear. The tee is available in adult S to XXXL sizes from now on.

View the back side of the shirt here

May 4, 2018

Trinity White Carbon 6000mAh LCG LiPo pack

Available now from Trinity is the new White Carbon 6000mAh LCG touring cat battery pack. The hardcase pack is built using high-quality 100C cells, it is 22.5mm tall and weighs in at 288g. The white colour hardcase pack is equipped with 5mm tube-style connectors and its reduced height compared to standard size batteries means an overall lower centre of gravity for improved corner speeds especially on high bite surfaces.

Source: Trinity [teamtrinity.com]

May 4, 2018

Yeah Racing YD-2 alloy suspension & steering kit

Coming from Yeah Racing and made for the Yokomo YD-2 and YD-2S drift cars is the aluminium suspension and steering performance upgrade kit. The set will improve the car’s suspension efficiency and adjustability thanks to insert-equipped front and rear suspension mounts. Also included are the front bulkhead bridge, front bulkheads, upper arm holder, the alloy steering base and the alloy servo mount with gyro mounting platform. All parts come machined from high-quality aluminium and they sport a black surface coating for wear and machined silver edge details for looks.

Source: Yeah Racing [yeahracing.com]

May 4, 2018

RCSS EB410 rear carbon fibre relocation tower

Coming from RC Speed Secrets and made for the Tekno EB410 buggy is the new rear carbon fibre relocation shock tower. RCSS have moved the upper shock locations and placed them in between the stock locations for more fine tune adjustment and it also features optimised inner ball stud mounting locations for shocks on the front of arm mod with 1.5mm roll centre increments. The shock stay, that is made of top-quality carbon material, can be used with stock, shocks on front arm, and MIP chassis conversions.

Source: RC Speed Secrets [rcspeedsecrets.com]