Red RC » Brand

September 10, 2018

MR33 V4 ETS Carpet Additive

MR33 have released the new “V4” version of their popular indoor tire additive. The additive has a new formula and will help a lot to build up the groove very quickly on carpet. This will be noticeable on big events where new carpet is used all the time. The new additive performs very consistently during the run and has a natural base without any chemicals inside. It will be delivered in 100ml bottles with a sponge applicator as with the previous versions.

Source: Tonisport [tonisport.de]

September 10, 2018

Vigor ARC R11 shock towers

New from Vigor are these 3.0mm thick lowered shock towers for the ARC R11. The new towers are made from thinner 3mm carbon fibre, compared to the standard 3.5mm material, for increased torsional flex and so improved traction on lower bite surfaces. The front tower has been lowered by 1.0mm and and rear by 2.5mm which they claim gives the car more grip and better response. Works with the original plastic short shock ends, all parts are a direct fit.

Source: Vigor RC [vigorrc.com]

September 10, 2018

Wesley van Helmond joins Sworkz 1/8th team

Sworkz have announced the addition of top Dutch 1/10 racer Wesley van Helmond to their 1/8th team. Joining Jorn Neumann in using the combination of Schumacer brand in 1/10th and Sworkz in 1/8th, Wesley will use the Sworkz S35-3 in Nitro and Electric races and together with Jarno Pijpers will form a strong national team in the Netherlands.

Source: MW RC Cars [mwrccars.at]

September 10, 2018

Xray XB2D 2019 – Coming soon

Xray are teasing the long awaited follow up to their successful XB2D Dirt Edition with the 2019 version set to be announced in the coming days. No details yet but we believe we shouldn’t have long to wait. Keep tuned.

Source: Xray [teamxray.com]

September 8, 2018

Arrowmax kingpin & steering block tool

New in Arrowmax’s honeycomb line of tools is this kingpin & steering block tool. It could perfectly align the kingpin threads in composite steering blocks. The new tool has a specially designed tip with an M3 thread on the upper end while the plain lower part slides into the steering block’s lower kingpin hole, ensuring the thread is cut at a perfect angle. By rotating the steering block the opposite thread can be cut. On top of having the two holes aligned, which will eliminate unwanted misalignment and friction, the tapping will also ensure easier assembly of the steering knuckle and C-hub area.

Source: Arrowmax [arrowmax-rc.com]

September 7, 2018

Elliott Harper joins Xray Factory Team

Xray have announced that multi-time UK national champion Elliott Harper is joining their Factory Team to race the Xray T4 platform. Elliott leaves Schumacher after 3 plus years to return to a team for whom he raced with at the start of his career when he burst onto the international racing scene, making the final on his Worlds debut in Bangkok in 2008. He had the following to say about the deal.

I am very excited to rejoin the Xray factory team. Xray was the very first team I started to race professionally with almost 10 years ago, with great successes winning multiple European Junior Championships with the 1/10 Touring Car and 1/12. After collecting experiences with other teams in the last few years I am excited to be back “home” with the Xray team and I am honoured to represent them again. I am thankful for this opportunity and I’m confident that I will continue to grow and achieve the best possible results at the highest level, whilst working closely with all Xray drivers. I look forward to seeing you all at the track very soon!

Source: Xray [teamxray.com]

September 7, 2018

Kyosho Lazer ZX7 1/10th 4wd buggy

It didn’t take long after the initial teaser for Kyosho to release details and under the shell shots for their new Lazer ZX7 4wd platform. Sporting new front 2mm shorter gull-arm suspension which allows for more grip and better durability, updated front knuckle and new front hub carrier with adjustable insert of 7, 10, 13 degrees. The front suspension holders are wider, as is the rear side rear holder, the rear upper bulkhead has lowered hole locations for high grip surfaces and a new 7075 hard anodised aluminium chassis is .5mm thinner (2.5/2.0mm) allowing lighter weight with improved flex balance. A low profile chassis brace bar which sits on top of the chassis also improves flex balance. Finally a new floating steering servo mount, new bodyshell with centre fins and front and rear gear diffs with new centre slipper clutch complete the package.

View another image here

September 6, 2018

Tamiya TA07 MS 1/10th scale Touring Car

Following a teaser image all the way back in July, Tamiya have finally unveiled the TA07 MS. The TA07 Pro is a very popular chassis kit among club racers across the world and one of the most popular machines to use for the Tamiya Championship Series. This new version of the platform has been given a significant overhaul, endowing it with even greater potential, infusing with parts, designs and concepts from the top-level TRF419XR chassis to create a beast on the racetrack.

View more information here