Red RC » Brand

February 6, 2018

Kyosho MP9 TKI4 hard dish wheels

Coming soon from Kyosho are hard dish wheels for the MP9 TKI4 series of 1/8th off-road buggies. According to Kyosho’s Yuichi Kanai the hard composite wheels, that fit most of today’s 1/8th off-road buggies, will perform better in high temperature and high humidity conditions and as they are of the same shape as the previous wheels, they will be marked with a large dot on the inside of the rim. The hard wheels will come in packs of four, in fluorescent yellow or white colour and they are about to hit stores soon.

Source: Kyosho [kyosho.com]

February 6, 2018

RPM Stampede 2WD rear bumper

Coming from RPM and made for Traxxas’ Stampede 2WD truck is an additional rear bumper. It combines scale looks with performance that works as it is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas wheelie bar. Additionally, if drivers decide to run without the wheelie bar, the rear bumper is so versatile, it will adapt and allow either configuration. The bumper for the Stampede 2wd consists of a scale bumper that uses design elements from many of today’s top full-scale bumper manufacturers. RPM start with an upper tubular shape, followed by faux stamped sheet metal filleted holes, a scale license plate area and with a final touch of a pair of scale 3” square openings for 5mm LEDs. The RPM bumper supports are designed tough, with serious impact absorption characteristics built in. With the use of an optional RPM rear bumper mount, the protection for the motor becomes nearly indestructible. The rear bumper is available in black or blue colour and it is made from engineering grade nylons.

View more images here

February 5, 2018

SWorkz S35-3 series 6mm alloy axle inserts

SWorkz have introduced a set of 6mm alloy axle inserts for the S35-3 series of vehicles. The parts directly replace the original plastic inserts and increase durability with the lightened 6x12x4mm ball bearing. Using the parts will also make for a more stable steering response and increased ball bearing life. The 4-piece sets fits the S35-3, S35-3E, S35-GT and S35-GTE.

View another image here

February 5, 2018

WRC Racing NTX offset alloy wheel hubs

WRC Racing have introduced new offset aluminium wheel hubs for the NTX 1/10th 200mm nitro on-road car. The hubs are available in 4.5mm, 5.0mm and 5.5mm offset and hey come grey anodised and with etched markings for easy identification.

View more images here

February 5, 2018

Leadfinger Racing A2 Tactic NB48.4 body shell

Coming soon from Leadfinger Racing is the A2 Tactic body shell for the Tekno RC NB48.4 buggy. An evolution of the original Assassin design the lid offers a lower downforce thanks to a narrowed cab and less windshield rake. Bump outs for the fuel tank and throttle servo make for lots of clearance and lower side pods with added rails improve high speed handling while in addition the longer overall length aids against chassis flex damage. The body is made of thicker polycarbonate material for durability, it come clear, including window masks and it is available for pre-order now.

View another image here

February 5, 2018

Kyosho Yuichi Kanai turnbuckle & ball end tools

Kyosho’s Yuichi Kanai has released a first preview image of two new turnbuckle and ball end tools that are about to hit stores soon. One features 5.5mm and 7.0mm ends for turnbuckles and steering pins while the second, with 6.5mm and 8.0mm ends was designed for 6.8mm ball ends and 7.8mm taper balls. Both were developed for the use with Kyosho’s MP9 series of vehicles, they sport engraved markings for easy identification and will become available very soon.

Image: Yuichi Kanai

February 5, 2018

Capricorn C803 Pro main chassis plate

Capricorn have introduced their new Pro main chassis plate for the C803 1/8th nitro on-road car. Machined from high-quality alloy material the chassis sports an updated design with a stiffer rear section while added front cut-outs make for increased torsional flex in the front which leads to improved overall balance especially when used in combination with the Dynamic Upgrade kit.

Source: Capricorn [capricornrc.com]

February 5, 2018

PSM X12’18 battery positioning system

Coming from PSM and made for the Xray X12’18 pan car is a battery positioning system that allow to easily shift the battery forth and back. Constructed from carbon fibre the set is a direct fit with the multi-piece clamping design reducing chassis tweak as does the O-ring battery mount. Including all necessary hardware the system weighs in at 8g and it is a direct fit on the X12’18.

View another image here