T-Works have introduced four carbon fibre gearbox shim sets for the Team Associated B64 buggy. CNC-machined from high-quality material and coming including mounting hardware the sets are available in 1.5mm, 2.0m, 2.5mm and 3.0mm specification to raise the rear and front gearboxes for optimised driveshaft angles and grip. Included are also suitable chassis brace shims made from carbon fibre.
Coming from Exotek is the XT6 1/10th 2WD stadium truck conversion kit for the Team Associated T5M and B6 kits. The kit is an essential laydown type chassis conversion and it features a specially designed 7075 alloy +6mm chassis that will help update the ageing T5M to the laydown type platform that is needed for today’s high grip tracks. The design allows the use of the newest B6 components such as the gearbox, battery layout, rear bulkheads, front bulkheads and steering, which then uses the T5M suspension components and body. The conversion includes heavy duty USA made 5mm carbon fibre front and rear shock towers that matches the stock T5M geometry and also included are front and rear T5M body mount adapters along with a detailed instruction sheet. Required for the conversion are a donor T5M and B6 kit or new parts including bulkheads, steering, gearbox and suspension.
Coming from IGT8 is the GTe 1/8th electric GT chassis kit. Based on the successful IGT8 GT 2017 platform, the electric car has an optimised battery, motor and ESC layout to improve handling and corner speed. The car features a sturdy aluminium chassis, front and rear aluminium chassis braces, lightweight carbon fibre shock towers and centre bulkhead plate, as well as a sliding motor mount, a spacious composite battery compartment with hook & loop straps and also a large front bumper with carbon fibre body post brace. The kit accepts popular 1/8th GT bodies and it is available now.
Factory RC have introduced the carbon fibre gearbox shim set for the Yokomo YZ-2 series of 2WD buggies. It allows 1mm and 2mm adjustments to the gear box height to change the CG and dog bone plunge angle on the car. For carpet the team often runs the gear box shimmed up 2mm while using the Yokomo Z2-304C-2 and Z2-018-2 pieces. This shim set can also be used without these parts on dirt/clay tracks to increase rear grip on those services that need it. The set is compatible with every version of the YZ-2 including the 1st Gen, CA, DT, and DTM kit. Set includes both 1mm and 2mm shims for the gear box, rear “CA” style brace, and waterfall shims all made in carbon look plate. 1mm or 2mm ball stud washers are used on the rear DTM mount for adjusting height. The addition of the water fall shim prevents bind up in the transmission assembly allowing for additional flex and grip.
Capricorn from Italy have announced the soon release of the C803 EP 1/8th electric on-road kit. Based on the C803 nitro car with whom it shares all suspension parts and geometry, the electric-powered kit was developed for the use with dual 2S shorty-style LiPo batteries. The car will become available as kit only and without electronics from end of October.
Source: Capricorn [capricornrc.com]
Arrma have upgraded their popular Kraton 6S BLX 1/8th electric speed monster truck with the 2018 variant sporting some subtle updates to further up performance and durability. The ’18 variant features revised transmission housings and a redesigned servo mount whose added material reinforces the part’s structures for improved durability while the safety battery mount incorporates adjustable hook and loop straps and wire guides to ensure the battery and wires stay where they belong. New shock cap protectors prevent damage to the upper parts of the shock absorbers, a larger RC box now takes larger aftermarket receivers if needed, and the 2050kV motor and 150A speed controller combo makes for top speeds of over 95km/h. The ready-to-run set is rounded out by a Tactic 2.4GHz radio system, dBoots multi-terrain tyres and a pre-decorated body shell in two colour schemes.
T-Works have introduced a full range of carbon fibre parts for the Mugen MTC1 1/10th electric touring car kit. Available are a 2.2mm chassis, 1.6mm or 2.0mm 1-piece top decks, 1.6mm or 2.0mm split front and rear upper decks, a motor mount plate, the front bumper plate as well as front and rear shock towers. Also coming is a floating servo mount plate. All parts are direct replacements and they are available now.
Schumacher have introduced the Contact RC LMP12 control tyres. Available in the popular and hard wearing ‘A’ foam with 32 shore hardness for the front and 30 shore for the rear, the tyres sport an orange stripe for easy visual inspection, making it an ideal control wheel for clubs and racing series. The front tyre comes trued to 44mm while the rear tyre is cut to 46mm.
