Red RC » Brand

July 26, 2017

FX K301 3.5cc nitro off-road engine

FX have introduced the new K301 3.5cc engine, follow-up model to the K3. The power plant features a number of refinements such as a redesigned intake for lower fuel consumption, it comes with an updated crankcase and backplate as well as a ceramic main bearing and a diamond-coated crankshaft. In addition the production and assembly process was refined with the 3-port engine being build from selected and matched parts and an individual certificate coming with each engine includes information about all production details.

View the features & specifications here

July 26, 2017

ARC R11 SRS Super Response Servo

Coming from ARC and made in collaboration with Savöx is the Super Response Servo tailor-made for the ARC R11 series touring car. The Super High Response technology provides quick steering response when used with modern transmitters while the incorporated servo mount makes installation easy in addition to saving 10g compared to the original servo mount. A short 50mm all-black receiver lead cleans up the wiring job for a full factory look. Equipped with a brushless motor the servo is able to pull up to 9.0kg-cm of torque at a transit time of down to 0.07s/60°.

Source: ARC [arc-rc.com.tw]

July 26, 2017

Rickside Design O.S. engines low-profile cooling head

Coming from Rickside Design and made for a range of O.S. nitro engines is the Nitro Shock low-profile cooling head. The silver colour head sports Rickside Design graphics and it is usable on the O.S. Max-21 XZ-B Ver.2, the O.S. Speed XZ-B Spec 2 and Spec 3 as well the O.S. Speed B2101 and B2102 engines.

Source: Rickside Design [ricksidedesign.com]

July 26, 2017

Serpent SDX 2.5mm lightweight aluminium chassis

Serpent have introduced a lightweight 2.5mm aluminium chassis for the SDX4 1/10th 4WD buggy. Machined from thicker-than-standard 2.5mm 7075-T6 material but sporting excessive milling to achieve the same low weight as the 2mm plate, the chassis is also hard-coated for wear while offering less flex than the standard chassis. This leads to a less aggressive and easier to drive buggy especially on high-bite tracks. The chassis will hit stores beginning of August.

Source: Serpent [serpent.com]

July 26, 2017

New Team Associated & Reedy apparel

Team Associated have introduced new AE and Reedy apparel in the form of shirts and caps. Available are the new Team Associated 3/4 sleeve T-shirt in grey colour, kids, lady’s and men’s AE Speed tees as well as the Reedy Heritage shirt. To this add 2017 Team Associated and 2017 Reedy Power snap back hats.

View the other new products here

July 26, 2017

Maclan Racing MR8.2 1/8 sensored brushless motor

Maclan Racing have announced the new MR8.2 1/8 brushless series of motors. The MR8.2’s new design is set to deliver balanced power and smoothness thanks to a combination of a 12-slot stator with a strong, staggered 4-pole, 8-magnet rotor that is constructed to be smooth and powerful while increasing durability. An all-new error-free sensor unit design with separate sensor magnet will minimise the signal noise the often can damage speed controllers. The series will include 1500kv, 1950kv, and 2150kv buggy style motors as well as a dedicated 2100kv truggy variant.

View more images here

July 26, 2017

TLR 22 4.0 Stiffezel 12mm hex front wheels

Team Losi Racing have introduced new Stiffezel 12mm hex front wheels for the 22 4.0 2WD buggy. Marked with an “S” inside of the wheels, they have been moulded from stiffer composite, which allows the wheel to flex less under higher load. During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns. The wheels fit all 22 buggies with 12mm hexes and they are available in yellow and white colour.

Source: TLR [tlracing.com]

July 26, 2017

RC Prostyle X1 2.25mm carbon fibre chassis

Coming from RC Prostyle is a 2.25mm carbon fibre chassis set for the Xray X1 formula car. Constructed from high-grade U.S. made carbon fibre the chassis was designed especially for asphalt racing in medium to high-grip conditions. The super-narrow design and raised side links increase ground clearance during cornering which results in less scrubbing and improved corner speed. Included come two types of link plates, one for the standard Xray links and one for shorter 65mm links such as the ones used by Roche or Yokomo – using the shorter links will help gain on-power steering. Included in the set are the chassis, rear pod plate, side link plates as well as mounting hardware.

View another image here