July 20, 2017

VP-Pro SRX8E body shell

Coming from VP-Pro and made for the Serpent SRX8E is a high-downforce body shell. It features a roof-top shark fin, a medium cab forward design and its rear flaps make for improved aerodynamics especially at higher speeds. The body comes clear, including overspray film and window masks.

Source: VP-Pro [vp-racing.com]


July 20, 2017

KAOS Reeper wheelie bar, chassis & springs

KAOS Advance Tuning distributors Robitronic have introduced a range of option parts for the CEN Racing Reeper 1/7th scale monster truck. First up is an adjustable wheelie bar set. Its design allows to set the tilt angle at 40 degrees or 45 degrees and it comes including ball-raced wheels and mounting hardware, making it a direct fit. Next up is a carbon fibre chassis plate made from 3.5mm sheet material. The hard compound graphite makes for extremely high rigidity while still being light of weight, upping the overall performance and looks of the truck. Last but not least are longer and stronger spring sets with progressive winding. Available in red or green colour to complement the Reeper body shells, the springs are ideal for the hardcore basher.

View the other new parts here


July 20, 2017

Team EAM Hudy setup station acrylic holders

Team EAM have introduced acrylic holders for the Hudy setup stations for both touring car and 2WD on-road. The magnets in the base will keep the setup stands from falling over and keep them neat and organised on the pit table and they also sport a slot in the back for the toe plate. Dedicated milled-out pockets also hold the wheel nuts for both TCs and pan cars.

View more images here


July 19, 2017

JConcepts B6 front camber link mount bulkhead

JConcepts have introduced their new 2-piece front camber link mount bulkhead for the Team Associated B6 series of buggies. The 2-piece design incorporates durable material, looks and tuning into a single package. The front camber link mount sports all three popular mounting locations and features a blended design which connects to the front bulkhead forming a unique, stout package. The bulkhead itself has all the tricks. Starting from a small square of a aluminium, the part has been mastered into a pocketed, threaded and high-performance unit complete with 3mm threaded holes, anodising and laser etching. Joining the two pieces together blends the parts and creates the valley for the sway-bar location. The sway-bar area is compatible with standard AE hardware and optional sway bar kit. The aluminium camber link mount and bulkhead combined with the plastic AE suspension mount weigh in at about 28.5g without hardware making it a tuning adjustment and it can be mixed and matched with AE and JC parts to create a load of different weight bias settings.

View more images here


July 19, 2017

Ultimate Racing 7.4V 2500mAh receiver battery packs

Modelix Racing have introduced the new Ultimate Racing 7.4V 2500mAh Lithium-Polymer receiver battery packs. Available in hump and straight pack configurations and coming pre-soldered with universal JR-type connectors the batteries will provide lots of runtime even with power hungry high-voltage servos and the straight pack also fits a range of transmitters.

View the hump pack here


July 19, 2017

Capricorn 1/10th & 1/12th pan car alloy rear axle

Capricorn have introduced a new aluminium rear axle for their Formula, 1/10th 200mm and forthcoming 1/12th scale pan cars. The axle shaft is machined from aluminium, additionally hardened and it sports a golden anodised surface while the diff plate shows excessive machining and a red surface treatment.

Source: Capricorn [capricornrc.com]


July 19, 2017

HB Racing D817 module 0.8 main gears & clutch bells

Coming from HB Racing and made for the D817 nitro off-road buggy are new module 0.8 main gears and suitable clutch bells. The somewhat finer module will result in overall improved drivetrain efficiency, equalling better acceleration, higher top speed and better mileage. Available now are 59T and 60T main gears as well as 16T and 17T clutch bells.

View the clutch bell here


July 19, 2017

Reds Racing Gen2 1/8th brushless motors

Italian company Reds Racing have introduced their new Gen2 1/8th electric brushless motors. Developed with the help of factory drivers such as Elliott Boots the power plants feature a new stator for increased heat dissipation, a redesigned rotor makes for improved throttle control and an all-new heatsink can increases heat dissipation. The features list is rounded out by dual sensor ports, pre-shaped heavy duty solder tabs and high-RPM ball bearings. The motor will become available in a range of winding options including 1900kv and 2100kv variants.

View the features and more images here


Tonisport
Mibosport
LC Racing
VP Racing
T-Works