Red RC » Brand

October 13, 2017

Team Associated Factory Team 4-shoe clutch gauge

Coming from Team Associated is the Factory Team 4-shoe clutch gauge. The tool was designed to detect worn-out clutch shoes that can negatively impact the performance of the clutch and cause an engine to intermittently flame out even when tuned properly. The “Go or No Go” style gauge is placed over the clutch shoes and rotated in the direction of the arrows, the smallest internal measurement profile of the gauge, 23.40mm, determines if the shoes are too worn – with new shoes, it will turn only slightly. If the shoes are smaller than the tool, the shoes need to be replaced for optimal performance. The tool works with a complete clutch assembly either installed or uninstalled on an engine. This eliminates the need for expensive measuring devices such as callipers or micrometers. The tool is made from hard-anodised aluminium and works on Team Associated 4-shoe clutch (stock B3.1 #81370) and Losi 4-shoe style clutches (steel and aluminium).

Source: Team Associated [teamassociated.com]

October 13, 2017

LMR RC Lifestyle car bag for 1/8th & 1/10th

LMR have released their all-new RC Lifestyle car bag for 1/8th and 1/10th vehicles. It is ideal for track days, club racing or even overseas competitions with its aircraft cabin compatible size and design. The bag can be carried using the small handles on the side or, but found in the rear zipped compartment are two straps that turn this bag into a backpack. Suitable for both 1/8th and 1/10th buggies and cars, this bag is capable of carrying 2 vehicles of either scale simultaneously or one car plus accessories, such as up to 30 sets of spare tyres. On top of that, there is a further zip pocket for carrying manuals, set up sheets, decals, pit board, towels and more. The padded main compartment provides the ideal protection for your most valuable RC items and the bag is branded with the iconic LMR design to make the bag stand out from the crowd, not only that, LMR are offering the opportunity to personalise the bag with the inclusion of the name of the driver’s team, club or even the name incorporated into the design.

View more images here

October 12, 2017

Shepherd Velox F1 2018 formula car kit

Shepherd have introduced the next evolution step of their successful Velox F1 platform. The Velox F1 2018 features a new battery mount system that utilises a new carbon fibre battery brace and upper plate that accommodates a rubber O-ring to secure the battery pack while also shifting the pack about 2.6mm towards the rear for increased traction and easier handling characteristics. To further improve the Velox Revolutionary Shock System the latest evolution of floating pistons is also included in the kit from now on. With the help of an additional O-ring the new floating piston completely prevents any possible tilt of the piston inside the shock absorber resulting in a fully leak-free and easy to adjust operation.

Continue reading here

October 12, 2017

HRC Racing 14.8V 4S 5800mAh LiPo battery pack

Coming from HRC Distribution is the new HRC Racing 14.8V 4S 5800mAh LiPo battery pack. Build from high-quality 65C/110C cells the hardcase battery was designed for 1/8th off-road vehicles and it comes pre-soldered with a genuine Deans T-plug connector. The pack measures 140x46x48mm and weighs in at 480g making it usable for a wide range of buggies, truggies and monster trucks.

Source: HRC Distribution [hrcdistribution.com]

October 12, 2017

Xray XB8 series lightweight High Speed body shell

Coming from Xray and made for the XB8 nitro and XB8E E-buggy is the lightweight High Speed body shell. Made from high-quality Lexan material the body offers increased rotation and speed in corners all while creating less chassis roll and a more aggressive handling. The body comes clear, with a protective overspray film and pre-cut window masks.

Source: Xray [teamxray.com]

October 12, 2017

Vampire Racing 2S TX/RX charging adapter XH/5mm

Vampire Racing have introduced their new 2S TX/RX Charging Adapter XH/5mm that allows to charge 2S LiPo transmitter and receiver battery packs through the their balancer port. Designed for the use with standard 5mm charge and balance wires the adapter utilises 5mm tube-type connectors for the power wires, a 2mm tube-type connector for the male balancer plug as well as an XH balancer connector for the battery side. The adapter does away with the need to use additional JR or Futaba style charge wires and balance boards, greatly reducing the amount of wires to carry and cleaning up the pit area. The adapter comes pre-wired, covered in protective shrink wrap and it is available now.

View more images here

October 12, 2017

Prostar R/C 8ight 4.0 carbon nylon pills

Prostar R/C have introduced a set of carbon nylon pills for the TLR 8ight 4.0. They have been designed to replace the stock and often sloppy inserts which are the main issue why hinge pins are bending. Prostar have made them from a special carbon nylon material for durability and strength and the set includes eight 0 degree, four 0.5 degree and four 1.0 degree inserts all of which are of a tight fitting design.

Source: Prostar R/C [prostarrc.com]

October 12, 2017

Losi Rock Rey 1/10th 4WD rock racer kit

Coming from Losi is the Rock Rey 1/10th 4WD rock racer kit. The kit variant of the company’s popular Rock Rey comes standard with a handful of option parts, allowing racers to customise the vehicle how they want as they have the complete freedom to accessorise and hop up the vehicle to their liking. With a new roll cage that resembles full-scale rock racers and its new front-end geometry, the changes add the needed handling for rock racing while taking advantage of the Baja Rey platform’s rear-loading battery and bottom-loading motor. The kit includes aluminium rear upper links and upper rod track mounts, as well as adjustable camber links and turnbuckles for the steering. For U4 racing, Losi includes a diff locker for the centre differential. Also part of the package are 2.2″x5.8″ Maxxis Creepy Crawler LT tyres and clear body panels to create custom paint jobs.

View the features and more images here