May 4, 2017

JConcepts 1988 Chevy Silverado MT body shell

Coming from JConcepts is the 1988 Chevy Silverado monster truck body shell. The 1988 styling is very clean, updated, refined and did not display the boxy looks from the early 80’s. The fleetside design is spot-on featuring slight curvature to the main shape, new headlights, grille treatment and form-fitting wheel wells. The slight flare to the tyre openings give just a little wrinkle to the bed-sides and front fenders to accommodate different sized tyres for maximum versatility. The JConcepts body includes a decal sheet that makes detailing out the headlights, taillights and grille a breeze while window mask allows the user to quickly get the body into paint. Also included is a Racerback which fits the ’88 perfectly to recreate trucks all the way into the early 1990’s. The standard cab body has an 11″ wheelbase and fits retro and race monster trucks as a drop-on giving the all important clearance and functionality.

View more images here

May 4, 2017

JConcepts Aero S-Type 1/10th buggy rear wing

JConcepts have introduced the next generation of 1/10th buggy rear wings with the new Aero S-Type. It includes options not yet seen before on a 1/10th off-road rear wing. An extended rear gurney lip makes tuning that much better for more grip on the loose surfaces while running the latest generation in off-road. The base of the wing design is built on the popular Aero wing but with new additions which make the wing more durable and more adjustable. The S-Type wing is a direct bolt-on piece for the Team Associated B6/B6D and B64/B64D. The wing features a long chord construction with revised section to incorporate some reinforced ribbing in the vertical plane below the over-hanging gurney. Cut-lines and dimpled locations are positioned throughout for trim and tuning options. The dimples in the rear can be reamed to expose larger holes which serve as pass-through for circulating air and helps the vehicle maintain its position during long flight jumps.

View another image here

May 4, 2017

Ultimate Racing MBX7 series receiver battery box

Coming from Ultimate Racing and made for Mugen’s MBX7 series of nitro buggies and trucks is a 3-D-printed receiver battery box. Designed to do away with the vehicle’s standard “strap on” design, the box is large enough to take most straight-type receiver batteries while also allowing to leave the connectors inside the box for even greater protection against the elements. The 2-piece part is 3-D-printed from highly impact resistant material and self-locking nuts ensure that the screw threads do not get stripped over time. The box fits both the MBX7 and MBX7R kits.

View more images here

May 4, 2017

WRC Racing GTX 1.3 1/8th nitro on-road kit

WRC Racing from Italy have introduced their GTX 1.3 1/8th nitro on-road kit. Based on the previous GTX the 2017 version has received some subtle updates such as an aerodynamically shaped front bumper, a new floating radio plate system and a redesigned fuel tank, the latter making for a lowered overall centre of gravity. Also part of the 1.3 package is a new rear diffusor for improved rear end protection and downforce.

View more images here

May 4, 2017

TQ Wire TQ11 11AWG wire

TQ Wire have introduced their new TQ11, an 11AWG wire that is thinner than average 12 gauge wire. Constructed from 2,303 strands of bare copper in a super thin silicone jacket, the wire as a 4.2mm outer diameter – providing a larger conductor in a more compact space. It is meant to have more copper than standard 12 gauge wire, allowing for increased current flow and lower voltage loss without having to use bulkier wires. The wire is available in 3 inch and 25 inch packs.

Source: TQ Wire [tqwire.com]

May 4, 2017

Arrowmax small body post reamer

Coming from Arrowmax is a small body post reamer. The compact and lightweight tool allows to drill up to 8mm holes into polycarbonate body shells and its machined handle and protective cap are made from high-quality aluminium with both sporting Arrowmax’ distinctive black/golden anodising and honeycomb design.

Source: Arrowmax [arrowmax-rc.com]

May 4, 2017

175RC TLR 22 4.0 Ceramic diff kit, nuts & washer sets

175RC.com have introduced new option parts and accessories for the TLR 22 4.0 4WD buggy in the form of a Ceramic diff kit, a lightweight nut set and M3 ball stud washers. Starting with the diff kit, the set targets stock racers as the set includes lightweight Ceramic diff balls and a lightweight Ceramic caged thrust bearing. The total weight of the set is 0.6g compared to the 2g of the stock carbide setup, resulting in improved punched and overall power delivery. Designed for the 22 4.0 buggy the set also fits other popular kits such as the Team Associated B6D, Kyosho RB6.6 and Yokomo YZ-2.

Continue reading here

Tonisport
Mibosport
LC Racing
VP Racing
T-Works