Red RC » Brand

August 22, 2016

Serpent release first SDX 1/10th 4WD buggy image

Serpent have released a first “official” image of their forthcoming 1/10th 4WD electric off-road buggy. In use by Jörn Neumann and other drivers during last weekend’s German Nationals, the shaft-driven and SDX-named buggy is still in prototype stages, making use of both already available Serpent parts such as lower A-arms, shocks while the remainder of the buggy is a mixture of prototype and externally sourced bits. So far the vehicle makes use of a common design with aluminium front and rear bulkheads, and a simple, lightweight mid section. We bring you more information on the project as they become available.

Source: Serpent [serpent.com]

August 22, 2016

T-Works B6-series chassis balance weights

Made for Team Associated’s sixth generation 1/10th 2WD buggies come two aluminium chassis weights. Machined from high-quality alloy and sporting a back anodised surface and laser-etched markings the under servo weight weighs in at 9.5g while the under electronics weighs adds 15g to the all-up weight of the buggy. Both use existing hardware holes and are thus securely fastened even when the going gets tough. The weights are usable separately or in combination and they fit both the B6’s and B6D’s chassis pockets.

View more images here

August 22, 2016

Zeppin introduce new electronic Spring Gauge

Coming from Zeppin is a spring gauge that helps to measure and match shock absorber springs. Offering compact dimensions of 54x72x143mm the device allows for a maximum spring rate of 29.7 N/cm and it is able to display the results in the four different units of N/cm, N/mm, LB/in and gF/mm. Other features include unit memory save, auto power off, short circuit, over weight and over voltage protection. The gauge is externally powered by a 4.8V to 15V DC power source and the set includes the main body, spring press set, press stand, cable and 5mm spacer with a 2mm spacer being available optionally.

Source: Zeppin [zeppinracing.com]

August 22, 2016

Modify T4 5g chassis balance weights

Modify have introduced specially designed 5g chassis balance weights for Xray’s T4 series of touring cars. Made to use the chassis’ pre-drilled holes underneath the steering assembly, but also fitting other brand’s cars, the dumpbell-shaped weights are a snug fit and they come with suitable mounting hardware.

View more images here

August 21, 2016

Framega YRX-12 2mm alloy chassis & lower pod plate

Italian company Framega have introduced a 2mm aluminium chassis and lower pod plate for the Yokomo YRX-12 1/12th scale pan car. Machined from high-quality 7075-T6 material the chassis sports strategically machined cut-outs to save both weight and offer optimised flex characteristics. A lot of attention was also put into reducing chassis scrubbing during hard cornering and so the side link attachment points received additional machining to achieve some extra clearance. Both the chassis and lower pod plate come black anodised, with silver chamfered edges for looks and they are available now.

View a detail image here

August 20, 2016

Pro-Spec introduce new brushless speed controller

Japanese company Pro-Spec have introduced their new brushless speed controller, developed in cooperation with ORCA. Currently still in prototype stages, also sporting the original ORCA case, the internals are redesigned to offer a smoother power band without sacrificing punch when needed. Also the brake software was renewed, again to smooth out the reactions on brake input but like the throttle characteristics the brake output can be sharpened when conditions call for it. The final ESC may come with an updated case design and we bring you more information on the project once they become available.

Source: Pro-Spec [pro-spec.jp]

August 20, 2016

T-Works UFO 64 titanium socket head screws

T-Works have introduced their new series of UFO 6AL/4V grade 5 titanium screws. CNC machined the M3 fasteners sport a distinctive “flying saucer”-shaped 2mm hex head, making them not only look different compared to other screws but they also provide exceptional mounting surface. The screws will be available in 14 different length from 4mm up to 24mm wit a special 35mm long variant also being available.

View a detail image of the screw head here

August 19, 2016

Xray Racing Series – Announcement

Xray have announced their new Xray Racing Series for the 2016/17 season. The events will be run in multiple countries and classes and all information about dates, rules and more will become available shortly.

Source: Xray [teamxray.com]