110% Racing have the limited edition Navy Grid tee up for grabs. The 100 percent cotton T-shirt features the 110% logo in a grid pattern on the upper left chest area, a single logo on the right sleeve, and the “Nothing Less.” slogan across the back, all printed on a high quality Hanes tagless shirt.
Source: 110% Racing [race110.com]
Graupner have announced the signing of newly crowned German 1/8th Nitro Buggy National Champion Marvin Fritschler. Marvin will use the Graupner/SOAR 998 buggies and a package of products from the Graupner portfolio such as the Colt HoTT radio, O.S. engines and Titan fuel. Marvin’s first major outing for his new sponsors will be the forthcoming 1/8th E-Buggy Nationals in Bistensee.
Source: Graupner [graupner.de]
The Xray Work.Shop Hong Kong will take place on the 25th of September at the Tom Racing Circuit in Yuen Long, Hong Kong. The workshop will focus on the Xray T4 touring car and it is run by newly crowned European Champion Alexander Hagberg who will give personal assistance and setup advise. Participation is for free and you can find more information here.
Coming from Team Losi Racing and made for the 8ight-E line of 1/8th scale electric buggies and trucks is the electric clutch system. It converts electric 1/8th scale buggies and trucks to a nitro-style clutch system, providing smoother throttle response, especially on bumpy tracks. The clutch provides instant power while increasing traction and decreasing the load on the drivetrain while the slip system of the clutch allows improved throttle modulation on bumpy tracks as it will slip under a heavy or abrupt load allowing the vehicle to remain stable. The clutch system also allows for full brake usage without the need for mechanical brakes due to the preloaded clutch shoes. The set includes two alloy and two composite clutch shoes, three different spring sets but not clutch bell and it is a direct fit on the 8ight-E 2.0, 8ight-E 3.0 and 8ight-E T 3.0.
Source: TLR [tlracing.com]
Roche have introduced the Rapide P10 1/10th scale 200mm pan car for World GT and narrow Pro10 classes. The car is based on a 2.5mm high-quality carbon fibre chassis and it features a widely adjustable front suspension, made by Xenon Racing, that allows for an adjustable wheelbase using the front lower suspension block and the graphite front plate. The reactive castor is adjustable as are the usual suspects such as toe, castor and camber. Unique with the P10, which is based off of the smaller P12 1/12th scale car, is a ball-raced rail-type steering system that makes for a more proportional and smooth steering feeling while offering quick steering Ackermann adjustments. The backbone of the chassis is a red anodised aluminium rear chassis brace as well as the battery and shock mount for the micro centre shock. In the rear the P10 features aluminium pod parts as well as aluminium mounting brackets for the rear axle that is height adjustable using spacers. The rear axle itself is made from high-quality graphite and it features a thrust race equipped ball differential and a 16-ball Xenon 64dp 93T spur gear. The kit is available for pre-order now and should hit stores very soon with a 235mm version being planned for the near future.
View the features and more photos here
Arrowmax have a new high-performance battery available in the form of the 7800mAh 2S LiPo pack. Built using high-capacity 55C/110C cells the battery comes in handy for all power hungry applications such as 1/10th touring cars as well as 1/8th E-buggies. The protective hardcase features standard 4mm bullet-type connector tubes which are accessible from both the top and bottom side and it is of standard 2S dimensions.
Click here to view another photo
New from MIP and made for large scale off-road vehicles such as the Losi 5ive-T are a limiter strap set and a header gasket. Starting with the suspension limiter straps, the set offers scale looks, functionality, and adjustability. Their main purpose is to limit the overall extension of the shock as to prevent it from overextending and doing damage to the piston, eyelet, rod end, and shock retainer. There are also many secondary benefits of these straps including not bending the arm at the droop screw pivot point, keeping the arms and chassis in better condition, and the droop set correctly on both sides. Included in the set are four limiter straps, limiter strap buckles and strap mounts.
Click here to continue reading
Italian company Mon-Tech have a new battery mount for Xray’s X1 formula car available. The LiPo Stop does away with the need to use mounting tape to securely hold the battery in the car as the C-shaped aluminium hold down plate puts enough pressure on the battery to keep it in the chassis even when the going gets rough. The mount, that supports both a longitudinal and transversal battery position, attaches to the existing battery plate and included in the set comes the plate, one long and two short aluminium posts as well as mounting hardware.
Click here to view more photos
