Red RC » Brand

November 14, 2014

HB R8 1/8th nitro on-road kit

After its first showing in prototype stages at the 2013 IFMAR World Championships in Japan, the HB R8 1/8th nitro on-road car will soon become available for the public. The basis of the car is a 5mm thick 7075-series aircraft aluminium chassis with the same material being used for the upper and lower bulkheads, which are split horizontally for fast belt changes and easy tension adjustments. Other alloy parts include the suspension mount, engine mount and layshaft mount. The tops of the bulkheads are fitted with lightweight carbon fibre shock towers while laydown steering and throttle servo positions make for a low centre of gravity.

Click here to continue reading

November 14, 2014

TRG working on budget pan car kit

Japanese company TRG, know for their highly complex F104 and F103 conversion kits, such as the TRG114, are currently working on a simple pan car chassis for Tamiya front and rear axles. The prototype shows a 1-piece fibre glass chassis with an integrated rear power pod as part of the main chassis rather than a 2-piece solution as seen on the original F104 and F103 cars. Cut-outs left and right make for a “T-bar” design that allows the motor pod to flex as it is needed to create rear traction and side-bite. The front and rear of the chassis take F103 200mm (and we guess also F104 190mm) suspension parts and the car is designed for the use with GT and sports car type of bodyshells. The car/chassis is still in prototype stages and we bring you more information as we get them.

Click here to view more photos

November 14, 2014

Exotek B44.3 10 degree alloy caster hub set

Exotek introduce a 10 degree alloy caster hub set for the Team Associated B44.3 buggy. The updated design offers vertical ball end mounting for quick roll centre adjustments by adding or removing spacers. The included 2mm spacers set the roll centre at the stock geometry with the 10 degree caster hub is set at the stock angle. Additionally the hubs offer adjustable steering arm lockout settings and an optional set screw placement against the hinge pin using a 4/40 set screw. The C-hubs are coming as pair, they are polished and anodised in factory blue and laser etched for easy left right identification.

Click here to view more photos

November 13, 2014

Hudy Exclusive Edition cargo bag

Hudy introduce their new Exclusive Edition cargo bag. Sporting dimensions of 78x51x27cm the roller bag is large enough to carry cars, electric equipment and tools while being compact enough to fit into low-height car trunks or to use them when travelling by plane or bus. An aluminium frame makes for a low weight while adding the needed rigidity as do the reinforced walls with printed Hudy graphics and the two heavy-duty plastic bars on the bottom. Soft rubber handles and ball-raced wheels make handling easy and the spacious interior has enough room for the 5 large boxes that come included with the bag. Alternatively the hauler bag also takes 8 small boxes or combinations of both.

Click here to view another photo

November 13, 2014

Team Associated 61mm 1/10th buggy wheels

Team Associated announce the soon release of their new 61mm disc wheels for 1/10th scale 2WD and 4WD buggies. They are designed to fit the new generation of buggy tyres, they are light of weight, offer pre-drilled vent holes and a rough, textured gluing bead for enhanced adhesion. A glossy finish helps to prevent the wheels from staining over time. The wheels sport a 12mm hex design and are available as 2WD front, 4WD front and general rear wheels in white and fluorescent yellow colour.

Click here to view the other new wheels

November 13, 2014

LMR welcomes young Lewis Jones

With the recent addition of Lewis Jones LMR welcome another young talented driver to their team. Lewis has been driving for a few years now and he is getting better each year, in fact so good that he started kicking his dad’s backwards and in doing so, forcing him into retirement and onto the tools for young Lewis. Since then he has improved his driving and his maturity and for 2015 he will pilot an MBX7R along with the range of LMR’s products.

Source: LMR [l-m-racing.co.uk]

November 13, 2014

Avid D413 hard-anodised aluminium chassis set

Available now from Avid is the hard-anodised aluminium chassis set for the HB D413. Born from a winning pedigree, Avid’s IFMAR World Champion winning B44.2 aluminium chassis, the HB part is further refined by lowering the ballast weight even more into the chassis, oversized chamfers on the bottom corners for increased stability during those inevitable chassis dragging moments, and an optional floating servo mount allows the chassis to twist equally left to right. Included with the set comes the 7075-T6 chassis, one delrin and one aluminium ballast weight, a carbon fibre battery stop, an Upgrade RC chassis protector, and an Avid decal. Additional 3g delrin, 7g aluminium, or 21g brass inserts are sold separately for more tuning options.

Click here to view more photos

November 13, 2014

Xray Work.Shop Italy – Announcement

Italian Xray factory team driver Francesco Martini, Alessio Menicucci and Mattia Collina will hold the Xray Work.Shop Italy at the RCLandia track in Scandino. The event takes place on the 15th on November and cover in-depth technical and setup support for all Xray T4’15 drivers. The free workshop starts at 10 a.m. and all you have to do to participate is to e-mail Francesco Martini with your interest to take part at f.martini@mac.com.

Source: Xray [teamxray.com]