Red RC » Brand

May 29, 2014

RDRP RB6 rear aluminium mid-motor bulkhead

Revolution Design Racing Products’ latest aluminium option part for the Kyosho RB6 buggy is a rear aluminium bulkhead for mid motor converted vehicles. Machined from high quality 7075-T6 aluminium and coming laser-etched the part not only makes for a solid base for the upper camber link mounts but also the wing mounts resulting in overall improved durability. The part is designed to replace the original plastic bulkhead on RB6, RT6 and SC6 buggies and trucks.

Click here to view another photo

May 29, 2014

Exotek TLR22 & 22-4 aluminium option parts

Exotek have new aluminium option parts for TLR’s 22 line of buggies available in the form of shock collars, a 22-4 steering link and 22-4 clicker cover cap. Starting with the shock collars, they come as 4-piece set and offer a large knurled nut for easy grip and super smooth spring preload adjustment. The parts use the stock O-rings and come as standard black, gun metal or new yellow colour variant usable on the 22, 22T, 22SCT or 22-4. Also new is a heavy-duty high-precision steering link for the 22-4. Steel bushing inserts are used to minimise slop for smooth movement and less wear. The aluminium link comes polished in your choice of black, gun metal or yellow colour. Last but not least is the aluminium clicker cover. The part replaces the stock rubber cap and comes polished, laser-etched and in black, gun metal or yellow colour.

Click here to view more photos

May 29, 2014

DE Racing 22T & RT6 Speedline ST wheels

DE Racing extend their existing line of Speedline ST disc wheels for the TLR 22T and the Kyosho RT6 by adding four new colours. Coming in red, pink, orange and green, the rims are direct replacements for the stock wheels and they add to the yellow, white and black wheels that are already available. All are made from tough yet lightweight material and offer specific offsets for each vehicle.

Click here to view the other new colour options

May 28, 2014

STRC Team Associated B5 series option parts

STRC introduce the first in a line of option parts for the Team Associated B5 and B5M. First up is a 25 degree front aluminium bulkhead. The bulkhead increases the durability of the front end of the buggy while adding a bit of weight to the front of the buggy to help assist in tuning for more steering out of your buggy. The set-screw over hinge-pin design provides long life for the aluminium parts as the hinge-pin will not wear down the bulkhead over time.

Click here to continue reading

May 28, 2014

Schumacher brand glass setup boards

Made from 6mm toughened glass are three new setup boards from Schumacher. Available in Schumacher, Core RC and Contact designs, the boards measure 40x30cm and are ideal for setting up 1/10th touring, GT10, LMP12, GT12 or 1/10th off-road buggies. Also available separately are three matching neoprene zip-up bags to protect the board during transportation.

Click here to view more photos

May 28, 2014

RSD TC6.2 RSD7 carbon fibre chassis

Available now from Reflex Racing is the RSD7 carbon fibre chassis for the Team Associated TC6.2 touring car. The shape of the chassis has been engineered so that the car can roll and pitch more naturally, increasing the traction and the steering of the TC6.2, which translates into more corner speed and stability. This is further assisted by the reduced width of only 85mm that has been chosen to promote more roll in the corners as well as allow to run a lower ride height when necessary. On top of that the battery position is pushed further back to increase corner entry steering. Other features include mounting holes for an optional and soon available motor mount and drilled holes underneath the front bellcranks allow easy access to the inverted bellcrank screws. Optional keyed-in carbon fibre battery holders are available separately.

Click here to view more photos

May 28, 2014

Exotek SRX2 direct spur mount

Exotek Racing introduce this direct spur mount for Serpent’s SRX2 series of buggies. Designed for the use in stock motor classes and oval racing, the spur mount eliminates the slipper assembly in order to make for a lighter drivetrain which improves acceleration and lowers the running temperatures of the motor. The hub assembly weights in at only 5.8g, which is almost the half of the stock slipper assembly and the design allows for easy switching between the gear hub an the stock slipper assembly when conditions call for it.

Click here to view another photo

May 28, 2014

Sanwa SRG aluminium servo case

German Sanwa distributor LRP introduce an aluminium upper and lower servo case for the Sanwa SRG servo. Included in the set, that greatly increases the strength and stability of the servo, are CNC-machined and gun metal anodised aluminium cases, four screws and two rubber seals to replace the standard plastic parts on the SRG servo. Although not official stated it is understood that the aluminium case is only usable with the standard size SRG-CZ but not the low-profile SRG-BL or -BLS.

Source: LRP [lrp.cc]