Red RC » Brand

May 20, 2014

Team C TM4 centre gear differential set

Team C now have a centre gear differential set for the TM4 1/10th 4WD buggy available. Included are the centre diff housing, a 75T and 80T composite main gear, outdrives, new centre driveshafts, a shorter carbon front upper deck and a new aluminium gear box cover. By eliminating the original slipper clutch and replacing it with a centre differential a somewhat 1/8 scale-ish drivetrain is created that can help with traction and drivability both on high and low traction surfaces.

Click here to view a photo of the diff set

May 20, 2014

New KM K8 & H-K1 option parts

KM Racing have new option parts for the K8 1/8th and H-K1 Evo2 1/10th 200mm car available. Starting with the K8, first up are two new anti-roll bar stopper sets. Available for 3.0mm and 2.5mm wires, the parts are CNC-machined from hard-coated 7075-T6 aluminium and designed to precisely hold the swaybar wire in place. Laser-etched size markings make identification easy. Also new and made for the K8 are hard-coated 7075-T6 20T and 16T pinion gears, a 29T plastic pulley gear with washer and a 48T rear pulley gear. The parts help to adapt the K8’s gear ratio.

Click here to continue reading

May 19, 2014

Schumacher Cat K1 & Cougar KF transmission housing

Schumacher introduce a new alloy upper transmission housing for the Cat K1, K1 Aero and the Cougar KF. Designed to replace the previous version the new parts allows to mount the shocks simply and quickly in front of the axle or behind with the removal of two screws. Changing the shock location is an important tuning option as the front position provides the best solution for high grip with good steering and responsiveness while rear mounted shocks give good stability on bumpy or slippery tracks.

Click here to view another photo

May 19, 2014

MIP Pucks Shiny drive system for B-Max2 MR

The latest buggy to receive MIP’s Pucks drive system treatment is Yokomo’s B-Max2 MR. Included in the set, that makes for a better serviceable drivetrain, are MIP’s Shiny steel C-CVD driveshafts, changeable Pucks cushions, new steel outdrives as well as MIP’s clear ball diff grease and blue thread lock.

Source: MIP [miponline.com]

May 19, 2014

Xceed bearing size tool

New from Xceed comes this bearing size tool. The stepped design allows to measure the inner diameter of metric bearing from 2mm up to 15mm and it also help to hold ball races in place during cleaning or lubing. The tool is made from machined aluminium and comes in Xceed’s signature green anodising.

Source: Xceed [xceedrc.com]

May 19, 2014

Capricorn LAB C801 & C02 heavy battery plates

Capricorn introduce three new battery plates for the LAB C801 and C02 nitro on-road cars. Coming in different thicknesses and thus weights, the plates will become available as 2mm (85g), 2.5mm (103g) and 3mm (123g) variant all of which are made from a special alloy copper and tungsten material. The parts help to fine-tune the overall weight and centre of gravity of the cars by adding weight at the lowest possible point of the chassis.

Source: Capricorn [capricornrc.com]

May 17, 2014

MIP SC10/T4 Pucks Shiny drive system

MIP’s Pucks Shiny drive system is now available for the SC10 & T4 trucks. Made from steel, retaining the same overall weight that you are used to with your steel OEM drivetrain, these give you the added benefit of MIP Pucks that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed to change are the Pucks when necessary meaning your drivetrain stays fresher longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

Source: MIP [miponline.com]

May 17, 2014

Pro-Line Electron tire & Velocity VTR wheels

Pro-Line have unveiled their new Electron 1/10th rear tire, available in M4 Super Soft and MC Clay compounds. The Electron shares close family ties with Pro-Line’s popular ION tire with the iconic dirt grabbing centre tread and futuristic styling. Featuring connected tire tread technology to improve traction and wear on even the most abrasive of indoor track conditions, the square centre pins laid out between the connected tread provide consistent forward and side bite even when the track gets dusty. PL have also introduced their new Velocity VTR 2.4” front wheels. The VTR wheels introduce the horizontal mounting style common in 1:8 Nitro and brings it to the precision environment of the 1:10 racing scene, resulting in a lightweight tire/wheel package. The tire mounting surface has been increased from 2.2” to 2.4” giving the tire a lower profile sidewall and ultimately more traction. Suitable for the front of the 2wd 22, RB6, B4.2 and B5 and a separate version for the 4wd B44.2 they are available in yellow or white.

View the VTR wheels here