Red RC » Brand

July 25, 2013

Absima Revenge CTM & CTS brushless components

Available now from German Team C distributors Absima is their own line of high performance brushless motors and controllers called the Revence series. Starting with the Revenge CTM motors, they are based around an aluminium airflow can with aluminium front and back plate, pre-shaped heavy duty solder tabs and dual sensor port. The motors are available as modified variant and stock variant including virtual all needed windings from 3.5T up to 21.5T with specific short course and 1/8th buggy variants coming at a later date. Also new is the Revenge CTM 10 160A speed controller. The speedo is useable with 2S to 3S LiPo batteries, and works with sensor and sensorless motors of 2 and 4-pole design alike. An optional programming card helps to adjust the various software parameters of the controller that comes including an add-on fan unit and power wires.

Click here to view the controller’s specifications and more photos

July 25, 2013

Losi Drake & Phend Edition Mini 8ight

Losi Drake Edition Mini 8ight

Losi’s nifty little Mini 8ight brushless buggy is now available as an Adam Drake or Dakotah Phend Edition kit. The 1/14th scale vehicle makes use of many design cues also found on the ‘full scale’ 8ight buggy and features 4WD, long A-arms, high-volume shock absorbers and adjustable turnbuckles. The buggy is powered by a Dynamite 4500kv brushless motor and comes with a waterproof speedo and SR200WP receiver as well as a Spektrum DX2L transmitter. The package is rounded out by the pre-decorated body shell and rear wing sporting Adam Drake’s or alternatively Dakotah Phend’s signature designs.

Click here to view the features

July 25, 2013

JConcepts B44.2 aluminium steering bellcrank set

JConcepts B44.2 aluminium steering bellcrank

New from JConcepts comes the aluminium steering bellcrank assembly for the Team Associated B44.2 buggy. In the stock trim, the B44 steering swings an all moulded, plastic bellcrank system as well as a plastic steering rack supported by bushings. The JConcepts design includes an aluminium driving and driven bellcrank and incorporates a flat panel 2.5mm material as the steering rack with three locations for Ackermann adjustment. The new rack includes bearings for the system to glide on while long stainless steel ball studs provide the connection between the system and steering tie-rod. The servo-saver less aluminium bellcranks, that are available in blue or black colour, allow for a more precise steering feel with increased steering through less defection while the carbon fibre rack pivots freely on the bearing supported system allowing the driver to feel less drag and quicker response.

Click here to view more photos

July 25, 2013

RT announce option parts for the RB One R

Reckward Tuning from Germany announce new option parts for RB’s One R 1/8th buggy in the form of front and rear carbon fibre shock towers, vented fibre glass brake discs and a set of rubber-sealed ball bearings. Starting with the shock towers, the parts are CNC-machined in Germany from high-quality 5mm carbon fibre and designed to fit the One R buggy only. Both the front and the rear shock stay sport additional inner shock mounting positions for added tunability. Next up are machined fibre glass brake discs whose design and material makes for better stopping power and minimised brake fading. The discs are white of colour and a direct replacement for the stock parts. Last but not least comes a RS spec rubber sealed ball set. Included are 24 ball races, treated with high-quality grease for long durability and less maintenance.

Click here to view the other new parts

July 25, 2013

Hobbytech Sprint RTR nitro buggy

The new Hobbytech Sprint RTR is a factory-assembled ready-to-run buggy of race-worthy specification. Based on a 3-diff drivetrain the buggy offers a widely adjustable, race-oriented suspension with 16mm aluminium big bore shock absorbers, alloy shock towers, adjustable turnbuckles and front CVD driveshafts. A GO21 3.5cc engines is already installed as are genuine Savöx metal gear servos, a polished tuned pipe and a 1400mAh 5-cell NiMH receiver batter pack. This all is covered by a pre-painted cab forward body shell and included with the vehicle comes also a digital 2.4GHz pistol grip transmitter and grippy tyres on black multi-spoke rims.

Click here to view the features and more photos

July 25, 2013

Mibosport steel and ceramic ball bearings

Mibosport introduce their new line of standard and ceramic high-performance ball bearings. Coming in two specifications as red rubber sealed standard steel ball races and orange shielded ceramic ball variant, both of them are lightly oiled to further reduce friction and to improve performance. The bearings are available in sets of four or as complete car kit.

Source: Mibosport [mibosport.com]

July 25, 2013

EZ Power Kicker brushless motors

Italian company Italtrading introduce the new EZ Power Kicker brushless motors. Coming in a rebuildable gun metal anodised aluminium can, with adjustable timing and heavy duty solder tabs the motors are available from 4.5T to 13.5T and are build using a 12.5mm all-purpose rotor. A 13mm high torque rotor is available separately.

Source: EZ Power [ezpower.it]

July 24, 2013

Team Associated and LRP to work independently

Team Associated and LRP today announced jointly that Associated will no longer be selling and servicing the LRP brand in North America. Associated has supported the LRP brand in North America for over 18 years and the two brands have achieved great success with many IFMAR World Championships together during this partnership. See below for the remainder of the announcement.

With both brands expanding and their respective product lines overlapping, both sides felt the timing was right to work independently, but still continue a racing partnership. Associated will now fully focus on developing and promoting the Reedy brand in all markets. Reedy develops products in the electric motor, nitro engine, battery, charger and speed control categories. LRP will expand its presence in North America by establishing LRP America, Inc. in Southern California. LRP America will provide marketing, service, and race support for a broadened product range in North America. LRP America will begin serving North America on September 1, 2013.

Source: Team Associated [rc10.com] & LRP [lrp.cc]