Red RC » Brand

July 21, 2013

Yeah Racing 1/10th touring car shock sets

Yeah Racing introduce their new high-performance shock absorbers for the use with 1/10th touring cars. The dampers make use of threaded aluminium shock bodies with aluminium upper and lower caps, and they sport titanium-nitrid-coated shock shafts and volume compensation via rubber diaphragms. Coming in sets of four the shocks include many tuning parts to make setup easy as there are 2-hole to 4-hole standard and tapered shock pistons as well as a complete 20-piece spring set and some shock oil. The shocks fit many of today’s touring car chassis and are available as 50mm and 55mm variant in blue, pink or gun metal colour.

Click here to view all parts that come with the shocks

July 20, 2013

Blacktarmac double reverse 1/10th clutch

Blacktarmac introduce their new double reverse clutch for 1/10th scale vehicles with .12 nitro engines. The special design makes use of dual clutch pads for a more powerful clutch engagement. The flywheel and the inner pressure plate are machined from lightweight 7075-T6 aluminium to reduce the rotation mass and to increase durability. The clutch, that won the EFRA Euro B in the hands of Luca Redaelli, comes with all needed parts except pinions and includes a steel and a 7075-T6 aluminium clutch bell. Available for Xray NT1, Capricorn Lab C-02 and Shepherd Velox V10 cars.

Click here to view a rendering of the clutch

July 19, 2013

AKA tyre gluing accessories

AKA announce two new products for the pits, namely tyre mounting bands, and a tyre gluing kit. The bands have been designed to assist in gluing up off-road tyres of all sizes from 1/10th buggy to 1/8th truggy, and everything in between. The gluing kit offers four mounting bands along with a bottle of AKA tyre glue.

Click here to view the other new parts

July 19, 2013

JConcepts MBX7 carbon fibre option parts

JConcepts is known for their various option parts, mainly for 1/10th scale vehicles, and now make another step into the 1/8th game by releasing a couple of carbon fibre parts for Mugen’s World Championship winning MBX7 buggy. Available soon are a 5mm front and 4mm rear shock tower along 3mm front upright arms and a 3mm steering rack. All parts retain the stock geometry and shed some weight, something that is especially valuable when running the MBX7 electric-powered as you can save round 24g of weight in total. The parts are CNC-machined from high-quality carbon fibre and a direct bolt-on.

Click here to view the other new parts

July 19, 2013

Tourex Power Switch & alloy servo bushings

German Tourex distributor RMV Deutschland introduce an electronic on/off switch called Power Switch and also aluminium servo bushings. Starting with the switch, the MCU controlled offering does away with the problems associated with conventional mechanical switches as it is housed in an enclosed case and therefore offers very good dust protection. The switch is best used in nitro vehicles and offers a NiMH and LiPo mode with the latter including a low-voltage protection. Upon arming a multi-colour LED also indicates the capacity left in the receiver battery. The switch comes pre-wired with JR-compatible connectors and two kinds of bottom covers. Also new are special aluminium bushings to replace the rubber servo grommets on steering and throttle servos. The machined parts sport a diameter of 3.7mm and an upper countersunk washer part while being gun metal anodised. The bushings come as 8-piece set and make for a rock-solid servo installation.

Click here to view the servo bushings

July 19, 2013

Spec-R R1 centre support motor mount

Made for the R1 electric touring car is this centre support motor mount from Spec-R. CNC-machined from aluminium and coming red anodised the 2-piece part is designed to allow for additional chassis flex adjustment by coupling the motor mount to the upper deck. The part must be used with Spec-R’s optional Type A or Type B R1 upper decks.

Source: Spec-R [spec-r.com]

July 19, 2013

Sweep Cubix 1/8th buggy tyre

Sweep Racing introduce the Cubix 1/8th buggy tyre. As the name implies the new offering makes use of medium-size square pins that are of nearly cubic dimensions and also widely spaced. It is understood that the tyre will soon be available in Sweep’s usual line of compounds from medium to ultra soft and as tyre only and or pre-mounted variant.

Click here to view another photo

July 19, 2013

RB Cyclone 1/8th buggy tyre

RB announce the official release of the new Cyclone 1/8th buggy tyre. It makes use of a flat tread with mainly square blocks giving the tyre lots of grip and stability. Included come new double hardness inserts that sport a softer outer ring to absorb bumps and imperfections of the track while a harder inner foam is giving better support at high speeds and when the going gets tough. The Cyclone already proofed its capabilities by setting the TQ and the fastest lap times in the hands of Davide Ongaro at the European B Championship and it is available pre-mounted or as tyre only in medium, soft and super soft compound.

Click here to view the insert