Red RC » Brand

June 20, 2024

Revolution Design B7 15.5mm Clamping Servo Horn

Revolution Design Racing Products has added a Clamping Servo Horn for all Team Associated 2WD vehicles like the B7, B6.4, T6.4, SC6.4, and the entire B6 series to its accessory line. These servo horns are made from black anodized 7075 aluminium and feature silver chamfers and a laser-etched RDRP logo, providing a sleek and professional appearance. The 25T version fits servos from Ruddog, Savöx, Protek, Reedy and many other servos, while the 23T version is suitable for Sanwa and JR servos. These servo horns offer a secure clamping mechanism and precise control for all demanding racing conditions.

Source: RDRP [revolution-rc.com]

June 20, 2024

RC Maker 1:10 Onroad Weighted Tweak Wheel Set Pro

In the latest product evolution from Ryan Maker’s RC Maker comes this blacked out Weighted Tweak Wheel Set Pro for 1:10 Touring Car. Featuring a more stylish updated design that also increases the usability, durability and accuracy of the tweak wheels. With longer thumb nuts for easier attachment, new chamfered nuts tighten down to hex without shims. It has a smaller range of motion once wheel lifts, for faster resetting with a one-piece weight/bulkhead design for increased rigidity and durability. A premium dual colour lock in base makes for easy transport. Made from RC Maker’s signature GeoCarbon, stylish chamfered, black coated and laser engraved brass give a high quality finished look.

Continue reading here

June 20, 2024

Sworkz complete Tool Bag Set

Sworkz has introduced a tool bag for its latest line of tools offering it as a complete ready to go set with all the key Sworkz tools you need to maintain and repair your RC car. Containing a comprehensive selection of high quality tools specifically designed for competition RC cars, the robust bag guarantees durability. It also offers numerous compartments and holders to keep your tools perfectly organised and easily accessible. The lightweight and compact design of the bag and the easy handling of the tools make it ideal for using it on the go and on the race track.

View more images here

June 19, 2024

Mugen Seiki MSB1 Pin Replacement Tool

New from Mugen Seiki is this Pin Replacement Tool for use with its MSB1 1:10 2WD Buggy. The Japanese manufacturer has produced the 2.5 Pin replacement tool following a lot of requested for the option. It is used to replace the φ2.5 pins used in the drive shaft of 1:10 electric buggies used by all brands with Mugen also offering replacement φ2.5×9 pins in a pack of 10 pieces.

View operation here

June 19, 2024

ARC A10 Ball Bearing DJ Driveshaft Set

Having unveiled the latest version of its A10 1:10 Electric Touring Car the A10-25 back in March, ARC has finally released its long awaited Ball Bearing Double Joint driveshaft set for the platform. The new ball bearing improves the efficiency of the front solid axle and lasts longer than the C cap, especially in modified or open-boosted classes. Using the new Ball Bearing Double Joint driveshaft set requires upgrading to R123033 A10 B.B outdrives.

View more images here

June 19, 2024

Yokomo SD/RD2.0 Drift Car Alu Parts

Yokomo has announced the release of a number of new aluminium parts for its SD/RD2.0 1:10 Drift cars. First up is an aluminium front bulkhead bridge for RD2.0 and SD2.0 which increases the rigidity of the front area. This improves the stability of the front section when diving into and coming out of corners, and increases the freedom of the driving line. The shoulder section has been significantly thinned out for a lightweight finish. For the RD2.0 there is a new aluminium mounting adapter that holds the lower rear shock. By increasing the rigidity of the shock mounting, it improves operating precision and increases road-following performance against minor vibrations. It is also heavier than the standard plastic one, which tends to increase the unsprung load and traction. Also new for the RD2.0 is an Aluminium suspension mount. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the RD2.0 standard, which makes it easy to achieve a slightly narrower profile. Fine adjustment is possible by replacing the bushings.

View more images here

June 18, 2024

Yokomo MS1.0 option parts

Yokomo has released a number of new option parts for its competition level MS1.0 1:10 Electric Touring Car. A new main chassis for MS1.0 is made of FRP material with soft resilience. This makes it especially effective on low-grip surfaces and adapts well to uneven road surfaces, enabling efficient traction gains. Also new are 10 gram per side front ballast weights. Made from heavy brass, it effectively utilises the tight space inside the suspension arms to increase front traction during acceleration. The contact area to the chassis is also minimised so as not to spoil the flex of the chassis. A new turnbuckle adjustable upper arm set makes the most of the MS1.0’s greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments. Finally in the release are button head screws 2mm thick and 10mm long which are also meant to be used as a body stopper installed on the upper arm of the MS1.0 touring car.

View more images here

June 18, 2024

Vigor RC MS1.0 Alu Gear Differential Housing

New from Vigor RC is this Aluminium Gear Differential Housing for the Yokomo MS1.0 1:10 Electric Touring Car. Also suitable for the BD12, the housing is made from 7075 Aluminium and features a long lasting and low friction POM pulley. The aluminium housing provided a more smooth differential and makes for more stable gear diff oil temperature.

View more images here