Red RC » Brand

September 16, 2013

Protoform 1971 Pontiac Firebird VTA body

Protoform introduce the 1971 Pontiac Firebird VTA body shell. The Pontiac Firebird Trans Am was one of the signature cars of the former full-scale series, and now Protoform has captured its trademark look in the release of the ’71 model for the VTA 1/10th scale racing class. From its aggressive front beak, to the duck tail-style rear spoiler, to the mother of all macho items – the shaker hood scoop – no detail was overlooked. The front nose cone is moulded separately, and when mounted with the 2mm screws and/or liquid adhesive, it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is included. The body comes clear, including nose mounting hardware and a large decal sheet and it fits virtually every 200mm touring car chassis and as well as 190mm cars equipped with off-set wheels.

Click here to view more photos

September 16, 2013

Tamiya TRF418 – First images

As expected some weeks ago japanese company Tamiya introduced their new TRF418 touring car during this week’s Tokyo Hobby Show. The revised top-of-the-foodchain TC sports a large array of new parts such as a new upper and lower deck as well as a new carbon fibre bumper brace and rear shock tower. On the aluminium side of things the 418 has redesigned front and rear bulkhead parts, new front bulkhead covers, a new motor and layshaft mount and an updated spool body and new 20T pulleys to offer. The new motor and layshaft mount separates the parts from the upper deck allowing for more torsional flex while the steering knuckles make for a more linear steering feeling. Other updated parts include revised front and rear A-arms for the use with ball-type anti-roll bars, new steering knuckles and rear hubs, as well as updated springs and spool outdrives with the latter scrubbing 2g of weight from the drivetrain. We bring you more information on the 418 kit as soon as we get them.

Click here to view more photos

September 16, 2013

Team C TM2 chassis stickers

Team C are busy adding more chassis protection stickers to their line up of decals. Following first touring car stickers the company is currently working on respective variants for the TM2 2WD off-road buggy. The pre-cut stickers will become available in several designs to complement with a wide range of body shell colours and help to protect the bottom side of the carbon fibre chassis plate against wear and tear while adding a splash of colour to your buggy.

Click here to view the colour variants

September 16, 2013

Sweep Silicone high viscosity ball differential grease

Sweep introduce their new silicone grease for ball differentials. It is of thicker viscosity than standard diff grease making it stick to the pressure plates longer increasing their lifespan and that of the diff balls. The grease is also good for the use on thrust bearings as well as sealed bearings and is recommended for any heavy-duty application where high pressures or loads are occur. The grease works in a large temperature range of -30°C up to 200°C and has a good resistance to moisture and water.

Source: Sweep [sweepracing.com]

September 14, 2013

Xray XB9E 12T pinion gear

Xray have added to their line of high-performance pinion gears for the XB9E with the release of this 12T version. Manufactured from special steel for toughness and durability, precise tolerances assure unparalleled concentricity. Precision-cut teeth with chamfered edges the pinion comes with the M4x4 set screw.

Source: Xray [teamxray.com]

September 13, 2013

JConcepts Nissan Armada SC body

New from JConcepts comes the radically looking Nissan Armada short course truck body. The exterior of the Armada is built to cater to racer demands. Aggressive, high-impact headlight and grille treatment has an unmistakable straight-on look. Included in the front hood design are reverse louvers which are built-in to allow two air-escape passages. The famous Nissan fender treatment has an additional raised section which allows plenty of front tire clearance under load. The raised section is double purpose and also functions as an additional air escape feature while the low-profile roof line helps maintain a low centre of gravity allowing the SUV to transition the turns like a JConcepts heritage truck design. Two, rear, easy to trim, Hi-Flow cut-outs chiseled between the SUV rear windows along with upper access for ream-able hole cut-outs complete a polished air release package. The body comes with decal sheet and window masks and is a direct fit on Slash, SC10, XXX-SCT, SCT-E and SCT 410 trucks with others may fit with additional trimming.

Click here to view more photos

September 13, 2013

Team Associated low-friction ball cups

Team Associated have new low-friction ball cups available for all cars that use the company’s standard #7230 ball cups. The redesigned cups help to free-up the front and rear suspension to let it work more efficiently. Included in the set are 12 rod ends.

Source: Team Associated [rc10.com]

September 13, 2013

Exotek F1 & Pan Car heatsink

Exotek introduce this heatsink for the use with pan and F1 cars. The special design allows the air to flow through the large fin section while the back of the heatsink gives enough clearance for high axle F1 or low axle 1/12th cars. The low-profile design also gives adequate body clearance and vented openings allow ‘open can’ motors to breath. The heatsink is machined from 6061 aluminium, comes in blue or black colour and simply clips onto the motor with no fasteners needed.

Click here to view more photos