Red RC » Brand

October 24, 2013

Lorenzo Crolla joins Xray off-road team

Xray announce the addition of the young and talented French driver Lorenzo Crolla to their off-road team. Lorenzo will attend all French championship races, French Cup, European Championship and he will try to get his ticket for the World’s in Italy. Lorenzo has been as a private driver already and will now receive the full factory support for his 1/8th and 1/10th campaigns. Lorenzo has this to say about the deal:

I am very pleased to be a part of the official Xray team. I have been very satisfied with the XB4 and after my first success at Euros my motivation has been even greater. After some extensive testing of the new prototype of the Xray’s 1/8 off-road car I was amazed with both the performance and handling and had no doubts at all to join the team for 2014. My motivation and excitement are at maximum and I am looking forward the next season.

Source: Xray [teamxray.com]

October 24, 2013

JConceots 6.6″ Hi-Tension wing

JConceots 6.6" Hi-Tension wing

JConcepts introduce their new 6.6″ wide Hi-Tension wing specially designed for mid-motor buggies. Mid-motor buggies are all the rage in competitive off-road racing and when compared to rear motor vehicles, have a slightly different rear wing placement. JConcepts has stepped up to offer a replacement Hi-Tension wing for drivers utilising the mid-motor option and released a specific wing for the application. The more aft position of the mid-motor wing allows more tyre clearance than normal. The wing also features redesigned the side-dams to accommodate this position and it comes with a flow-through feature in the form of a small angular plane which can be trimmed for a slot which air can pass during racing conditions. In addition, the actual vertical side-dam now has a profiled shape near the bottom, tightening the section and also increasing the stability of the side-dams. Although specifically designed for mid-motor applications, the new wing works also great on 2WD rear motor vehicles as well as 4WD buggies.

Click here to view another photo

October 24, 2013

More Team Durango DEX408v2 photos

Team Durango keep releasing more images of their upcoming DEX408v2 1/8th E-buggy. No detailed information are available yet but it is understood that the kit will include a host of new tuning options and platform refinements. According to Team Durango the v2 will become available World-wide next month.

Click here to view more photos

October 24, 2013

Capricorn big bore touring car shocks

Capricorn have new big bore shock absorbers for electric touring cars available. A standard item on the new LAB TE02 car the shocks feature a new quadri-ring seal, thin shock shafts and a new bushing fix system to let the dampers work smoother and more efficiently. Included with the shocks come also 50 shore and 60 shore volume compensator membranes and an assortment of shock pistons with 1mm and 1.1mm holes.

Source: Capricorn [capricornrc.com]

October 24, 2013

LRP LiPo Safe Box

New from LRP come the LiPo Safe Boxes in two sizes. Made from a fire-resistant fabric the bags help to keep flames and electrolytes inside the container in the event of a LiPo battery going “boom” during charging. Tough velcro straps keep the lid closed securely while convenient openings make charge wire routing easy. The Safe Box is available as small 15x6x5cm box and large 18x8x6cm offering.

Source: LRP [lrp.cc]

October 24, 2013

Muchmore Tweak Master

Muchmore introduce the Tweak Master tool for easy and accurate chassis “de-tweaking”. The tool compromises of a thick tweak plate and a carbon fibre rod and comes in a handy bag for easy storage and transportation. To un-tweak the chassis simply place it on the tweak plate, loosen the top deck screws, press the chassis down by pushing the carbon rod against the shock towers and tighten the top deck screws again. The tool is meant to work with nearly all of today’s 1/10th electric touring car chassis.

Click here to view more photos

October 24, 2013

Sweep TLR 22 body in the making

Sweep are currently working on a new optional body shell for the TLR 22 buggy. The yet unnamed body features an aggressive cab forward design, a recess behind the cab an a large motor cover/rear section with an additional fin for high speed stability and a channelled airflow toward the rear wing. We keep you up to date with more details as soon as they are available.

Source: Sweep [sweepracing.com]

October 24, 2013

Pro-Line Phantom body & pre-cut wings

New from Pro-Lines comes the Phantom design body shell for Kyosho RB6 and Tamiya 201XR/XM cars as well as pre-cut Stabilizer 6.5″ and 7″ wings. Starting with the body, the Lee Martin design item features an all-new cab forward look and sweeping body lines that flow back to a single point. The optional centre fin adds additional high speed stability and finishes off the design of the body. As usual it comes clear, including window masks and decal sheet. The Stabilizer wings combine style, performance and durability, add rear traction and high speed stability and are made from genuine lexan material. They now are also available precision pre-cut to make the somewhat fiddly task of fitting the wing even easier. Available are a medium-size 6.5″ and a large 7″ variant.

Click here to view more photos