Red RC » Brand

May 27, 2013

Hipex low noise 4-chamber EFRA homologated pipe

Hipex have released this low noise 4-chamber EFRA homologated pipe for .12 engines, the only pipe able to effectively get down to the 90 dB level. After extensive testing this is the first effective solution for tracks in trouble for excessive noise without sacrificing performance. The noise reduction is equal to 6 dB and together with the INS box the noise goes down even further without loss of performance. This pipe is a standard in Dutch Nationals and has been used with much success with many satisfied racers. Must be used with the dedicated manifold CL120036 that ensures the correct assembly on your 1/10 car.

Source: Hipex [hipex.it]

May 27, 2013

Kyosho Plazma LM Toyota TS020

Kyosho Japan announce the Plazma LM Toyota TS020 1/12th scale chassis kit. Based on the Plazma Ra competition pan car the Plazma LM series of cars build on a long wheelbase fibre glass chassis with conventional T-bar rear suspension, a single central shock and dual side dampers. The highly adjustable front suspension is directly taken over from the LM’s competition sibling as are many parts of the rear suspension including the adjustable ball differential. The car is useable with a wide range of battery configurations including 1S to 2S LiPo batteries and four to six cell NiMH battery packs and comes almost ready-to-run including a brushed G20 standard motor, pre-mounted high grip foam tires and a highly detailed Toyoto TS020 LeMans body shell.

Click here to view another picture

May 27, 2013

VBC touring car & F1 options

VBC Racing introduce two new option parts for the Wildfire and FF Twelve touring cars as well as the Flash04 formula chassis in the form of hardened lightweight spool outdrives and aluminium spring retainers. Starting with the outdrives, they are designed for the aluminium spool body, come with a hardened surface and are machined to reduce weight and thus rotation mass for a quicker spool up and better acceleration. Also new are aluminium spring retainers for the shocks of the Wildfire, FF Twelve and Flash04 cars. The large diameter securely holds the spring while the grey anodised finish matches the remainder of the car’s parts.

Click here to view the other new parts

May 27, 2013

Xray XB9 long progressive springs

New from Xray come long progressive springs for the rear end of the XB9 and XB808 buggy. They are designed to reduce chassis roll mid-corner by becoming stiffer when the suspension compresses. Available as soft-medium and medium variant the springs are individually measured, controlled, inspected, and matched to provide identical damping characteristics and come marked for easy identification.

Source: Xray [teamxray.com]

May 27, 2013

Mike Swauger continues with Xray through 2013

Xray have announced that former EP World Champion and multiple US National Champion Mike Swauger has confirmed he will continue to race with the Xray team through 2013. Mike will continue to run the RX8 and NT1 at all major onroad races including this year’s World Championships in Japan. He had this to say about the deal:

I would like to thank Ralph Burch and everyone at R/C America and Xray for the past two years of racing. I’m excited to have signed with team again for the 2013 season and looking forward to having a great year of racing with the Xray Team. See you at the next race.

Source: Xray [teamxray.com]

May 26, 2013

PSM B4.2 carbon front shock tower

PSM have produced this new carbon front shock tower for the Associated B4.2, which comes as a complete set with all required mounting hardware. Made from glossy 5mm carbon fibre, it is super lightweight at only 14.0g and gives your B4 a nice factory team look. It also features an additional inner shock position which will be a big advantage on high bite tracks such as carpet or astroturf.

View the mounted shock tower here

May 26, 2013

Awesomatix A700 spur gear damper system

Awesomatix have released a new spur gear damper system for all A700 cars. The new system has damping from the o-rings which softens the reaction from the motor and makes the shaft transmission more similar to belt transmission when the throttle or the brake are applied. Lap times become more consistent and the car is easy to drive. In order to install this system you should increase the two current holes on the spur gear to 5mm. Awesomatix plans to produce its own line of spur gears with these holes in the future.

Source: Awesomatix [awesomatix.eu]

May 24, 2013

Xray XB4 linear & progressive springs

Xray have announced new springs for the XB4 that have been specifically designed to complement the big bore shocks. Sold as a pair, the spring rate of the linear springs is constant during the entire spring compression, while the main advantage and benefit of progressive springs is that as the car initially enters the corner they work like soft springs to provide maximum traction. At the same time, when the chassis begins to roll, in the middle of the corner, the spring rate progressively increases until they work like a hard springs which allows the car to maintain maximum cornering speed. Like all the other Xray springs, these springs are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics. The front springs are available in Progressive (2 stripes) and linear (2 Dots & 3 Dots) while the rear springs are available in progressive (2 stripes) and linear (1, Dot, 2 Dots & 3 Dots).

Source: Xray [teamxray.com]