Red RC » Brand

November 30, 2012

Exotek Durango 410 & 210 suspension mounts

New from Exotek Racing and designed for Team Durango’s 410 and 210 series vehicles are these aluminium suspension mounts. Made for the DEX410 buggy are the 3.0°, 3.5° and 4.0° RR hangers that give rear toe-in settings of 3° up to 4° while retaining the possibility to adjust the rear anti-squat using the kit’s plastic inserts. The parts are CNC-machined and sport a beefed-up centre section for added strength. Also new are the +0° and +.5° RR hangers for the 210 cars. The +0° part retains the stock suspension setting while the +.5° part adds half a degree of toe-in to make for an overall 3.5° setting. Both parts are CNC-machined from aluminium, come gold anodised and are marked for easy identification.

Click here to view the other new parts

November 30, 2012

TrakPower MS sensored brushless system

TrakPower USA is proud to announce their new MS sensored brushless systems. Available are the MS-1 speed controller and MS series brushless motors. Designed for 1/10th on-road and off-road applications the MS-1 ESC features an all-aluminium case, stock and modified profiles including a zero timing ‘blinky’ mode, gold-plated solder posts and a compact design for easy installation. The controller is compatible with motors down to 2.5T. The MS series sensored brushless motors come with a ribbed CNC-machined aluminium heatsink case, sintered rotors, adjustable mechanical timing and heavy duty solder posts. They are available as 6.5T and 8.5T modified variant and also 10.5T to 21.5T stock motor. Also available are bundles including motor and controller.

Click here to view the motor

November 30, 2012

Elangears charging harness

Elangears introduce this new charging harness for the use with their new line of chargers. The wires come pre-assembled with gold-plated bullet type connectors at the charger’s end and large crocodile clamps at the battery end. The angled design reduces the space needed for the charger and helps to keep everything clean and tidy on tight pit tables. The harness of course fits many other chargers.

Click here to view another image

November 30, 2012

Craig Collinson doubles at Chadderton

The Batley Buggy Club hosted the second round of their Chadderton winter series, held at Radclyffe Athletics Centre. With over 120 entrants, a full days’ racing was ahead of the drivers. The multi-surface track looked fantastic with a good mix of jumps, bumps, carpet and the usual cork flooring. The track was also laid out to run anti-clockwise just to mix things up a bit. As qualifying got under way it was clear to see the fast guys were all running dBoots Terrabytes tyres (A compound), as these proved to provide the most grip on the cork flooring and looked super consistent between surfaces. Just like in the first round both 2WD and 4WD classes were run on the same day, so it was all systems go for those competing in both classes. There was some great and close racing throughout the four rounds, but it was Team Durango driver Craig Collinson who was on form again, taking three out of four qualifying rounds with both his DEX410v3 and DEX210, to give him the overall TQ spot with both cars. Steve Lawson qualified second in 2WD and Conor Cocker took the second qualifier spot in 4WD, also driving a Team Durango DEX410v3.

Click here to continue reading

November 30, 2012

Yokomo R12C pan car kit

Yokomo is proud to announce the release of the R12C, an exact copy of the car Naoto Matsukura took to World Championship honors in 2012. The kit contains a weight balance optimized chassis, a new centre point steering assembly to improve the Ackermann geometry, a highly adjustable rear width to help adapt the car to different grip levels and the kit also comes with a newly designed left side rear wheel hub.

Click here to view more images

November 30, 2012

Spec-R touring car & M-type dish wheels

Spec-R introduce new dish wheels for 1/10th touring and M-class on-road cars. Starting with the touring car wheels they are available as standard and low-rib variant. White of colour the 24mm wheels weight 9.8g per piece and come in sets of four rims. Also new are 24mm M-class dish wheels in white colour and sets of four. Just like the touring car wheels they are available in a standard and low-rib variant.

Click here to view more photos

November 30, 2012

JConcepts 1/10th truck & buggy profiled inserts

JConcepts have released two new profiled inserts for 1/10th truck and 1/10th buggy. The insert for 1/10th racing trucks was debuted during the 2012 Cactus Classic and has been used in a testing phase throughout 2012. The material and design is very similar to the popular 1/10th buggy rear insert giving it a medium to firm feel. The new 3206-3 1/10th buggy rear insert comes on the heels of the success of the 3206-2 insert. The -3 insert as it is called, utilizes the same inner and outer cuts as the -2 but with a slightly rounder profile, the insert rounds the shape of the tire slightly which is advantageous in loose conditions with treaded tires or when using slick type tires.

View the buggy insert here

November 29, 2012

RDRP Ultra set-up board

After receiving a large amount of interest for their upcoming team driver-only aluminium set-up board, Sven and Michael from Revolution Design have decided to make it available also for the public. The Ultra Set-up Board comes in 3 cool anodized colours, black, gold and hard-anodized olive green and is 570 x 440 x 2mm. The graphic on the board is made for buggies but also fits touring cars and features lines for toe-in and easy identification of wheelbase.

Source: RDRP [revolution-rc.com]