Red RC » Brand

February 21, 2011

Orcan GT7 .21 on road engine

Having written briefly about this new engine in the past, SMI Motorsport have released their first .21 on-road engine, the Orcan GT7. This new motor is excellent value for money and being based on a Novarossi it is easy to adjust and deploys its power evenly across the power band to ensure great driveability making it highly competitive. Additionally the Orcan GT7 is available as a MH version, optimized by engine tuner Michael Heinrich. The MH version is completely re-worked and comes with a modified liner as well as a crankshaft with a revised timing to provide more power across the whole RPM range. At the launch the GT7 is only available in combination with a pipe (EFRA 2015) and a short manifold and the set comes in an Orcan multifunction bag.

Source: SMI [smi-motorsport.de]

February 21, 2011

Xceed GT-C5 1/8 scale body-shell

Seen during our toy fair coverage, Xceed have released this new 1/8 scale body-shell called the C5. Developed in Germany according to the new IFMAR regulations for the 1/8 scale class which stipulates lower sides, this shell is EFRA homologated #31524. Featuring easy handling, with lots of downforce, the new front end design and recessed central front area creates lots of steering too. Made from high quality clear polycarbonate and available in standard 1mm or light 0.75mm thick versions.

View more images of the body shell here

February 21, 2011

Hupo Honigl joins RCAllStickers team

RcAllstickers.com have announced that it will support Austrian driver Hupo Honigl throughout the 2011 season with their full range of products. Providing the multiple European Championship finalist with their premium quality R/C skins and stickers, they will adorn the Factory Durango driver’s transmitter, starter box, as well as the body shells from his DNX408, DNX410, DESC410 and DEX210.

Source: RcAllstickers [rcallstickers.com]

February 21, 2011

Max Power XL3 engine 2011 version

Max Power have announced that their World Championship winning XXL3 .12 engine has been given a makeover for 2011. In addition to the improved WC piston and sleeve that released near the end of last year in the original WC edition, further improvements on this engine include new improve fuel channels in the crankcase as well as an all new cooling head which is lighter as well as sitting lower for better centre of gravity.

View more engine photos here

February 21, 2011

Murnan Modified RBM3 .12 engine

Murnan Modified has announced that their RBM3 engine for 2011 is now available. The engine has an increase in power over last year’s model, without sacrificing much run-time. In development over the past year with feedback from some top level on road drivers, at top level on road racing events around the world, the new design has been track and dynamo tested to ensure that it is faster and still easy to tune. The engine is also still getting enough run-time to easily finish a 5 minute qualifier in any conditions, even with the most aggressive drivers. The power increase can be attributed to the new sleeve, crankcase porting, new crankshaft timing and a special ceramic main bearing. The crankshaft also has a new, more balanced design, which helps overall power and r.p.m. while the new carburetor allows for very easy tuning and restarting when the engine is hot. Finally the new cooling head design keeps the engine temperature over 20 degrees cooler than last years model.

View images of the internals here

February 21, 2011

T.O.P. Photon servo mounts & tie-rod wrenches

T.O.P. Racing have released a number of new parts starting with these two tie rod wrenches in 3.6mm for touring car and 3.2mm for pan cars. Designed in a way that users can get into those difficult to reach tie-rod locations at 2 different angles instead of just going in straight, the tools are made from red anodised alloy. Also from T.O.P. are these optional alloy servo mounts for their Photon touring car. Also made from red anodised aluminium, it allows for a more rigid servo attachment to the chassis.

View the other products here

February 21, 2011

Hiro-Seiko imperial tool series

In order to satisfy more requirement, Hiro-Seiko have released a new range imperial series of RC tools. With black, aluminium alloy handles, the tips are made from HSS which is durable and allow a long life. The new additions include a 0.05″, 1/16″, 5/64″ & 3/32″ easily identified by the name and size laser engraved on the tip. Hiro Seiko also sell spare tips to upgrade or replace your current tools.

View the tool tips here

February 20, 2011

Jason Branham continues with Xray

Some more driver news from Xray who have announced the re-signing of Jason Branham. Last year’s RC Pro Buggy National Champion had this to say about the contract renewal:

For the past 5 years RCAmerica and Xray have given me unbelievable support along with the best equipment possible in order to help me achieve great success. I have decided to re-sign with Xray/RCAmerica for 2011 and I will be working very hard to to help improve Xray’s success on the track. I would like to thank Xray and RCAmerica for all they have done for me, for allowing me to represent such a great company and I can’t wait to get started in 2011.

Source: Xray [teamxray.com]