Red RC » Brand

May 26, 2011

Xray XB808 lower suspension holders

Xray have released this set aluminium front and rear lower suspension holders for the XB808. CNC-machined from premium Swiss 7075 T6 aluminium and hard coated for extra durability and long life. The ultra-strong construction provides very long life and durability in even the most extreme racing conditions. The set includes all parts necessary for a complete suspension holder system upgrade. These new lower suspension holders provide an even greater range of adjustment for the front and rear suspension. Using different combinations of eccentric bushings, fine adjustment of front kick up, rear anti-squat, front toe-out, rear toe-in, front & rear roll center and front & rear track-width can be obtained. New reinforced bushings (included) have 1° and 0.5° eccentricity which allows up to 17 different positions. Super-fine adjustments can be made by increments of 0.5°. Includes heavy-duty suspension pivot pins that have been heat treated for increased strength.

View the rear suspension holders here

May 26, 2011

Much More flexible sensor cables

Much More introduce their range of flexible sensor cables. Available in 90mm, 135mm and 180mm version, they work with all ESCs and brushless motors. Their flexibility makes them especially useful when used in 1/12th scale where it will give you less interference between motor mount and chassis.

Source: Much More [muchmoreracing.net]

May 25, 2011

LRP Vector X-12L SC 550 5.0T motor

Having announced their new 550 size X-12L motors last January, LRP have announced that the motor will now be available in 5.0T, joining the already available 5.5T and 4.5T versions. 4WD Short Course drivers can now take advantage of the World Championship-winning XTEC X-12 technology. With the all new Vector X-12L Short Course 550 motors, developed for 4WD Short Course racing, even more performance is available at your disposal.

Source: Associated [rc10.com]

May 25, 2011

Motonica signs Raimondo Gilletti

Motonica have announced the signing of Italian ace Raimondo Gilletti. Raimondo has been racing RC since 2000 and has acquired great experience for his young age. For the last 3 years he has been ranked in the Italian Top 10 and has already taken part in the most important racing events at both National and International Level. The first events that will see Raimondo running the P81 RS are the Ecomodel Trophy in Gubbio, Italy (11/12 June) and the Euro Nitro Challenge in Hildesheim, Germany (23/26 June).

Source: Motonica [motonica.com]

May 25, 2011

Xray RX8 lightweight front middle shaft

For serious racers conscious of weight savings, Xray have created this new optional front middle shaft for the RX8. CNC-machined from Hudy Spring Steel, it has been strategically lightened by 55% compared to the standard front middle shaft. The front middle shaft is highly wear resistant at contact points, helping to increase the lifespan of the shaft bearings, while rotating mass is reduced without sacrificing strength or durability.

Source: Xray [teamxray.com]

May 24, 2011

Capricorn LAB-C801 option parts

Capricorn have been busy lately, with more new parts for their LAB-C801 chassis. First up is the new set of lightweight red anodised aluminium wheel nuts, that replace the quick release lever, allowing for a more accurate and true mounting of the wheels. Next up are a pair of rear shock stays, which have the same design as the original carbon version but have been made from treated steel for more strength. A new rear body mount centering assembly, with new carbon plate, features ball bearing for a smoother movement. For tuning purposes there is a new 3.2mm rear wire anti-roll bar, which comes with the mounting collars and ball bearings. And finally for all 1/10th scale cars, Capricorn also have a simple set of nylon rear wing screws & nuts.

View the other products here

May 24, 2011

Xray XII & X10 stiffer suspension parts

Xray have released a set of hard suspension parts for their XII and X10 cars. The new parts which include the front upper suspension arm and both the left and rear steering blocks are now also available in the new harder material which is stiffer and stronger.

Source: Xray [teamxray.com]

May 24, 2011

STRC Slash 4×4 GT-8/Rally cross conversion

STRC have released images of their upcoming Slash 4×4 GT-8/Rally Cross Conversion kit. Some Slash 4×4 owners might be bored with bashing around or racing their Slash, and with this conversion kit, Slash 4×4 owners have a whole new dimension to enjoy their Slash. Keeping the ground clearance of the Slash 4×4, this conversion makes it perfect for Rally racing as well. We can can expect more details when it is released later this week.

Click here to see under the body