August 18, 2010

Tamiya 201 based Short Course truck

To clear up some rumors about the Tamiya 201 based Short Course race truck that have been going around, TRF driver Jimmy Wright decided to give us an update. The car was built using the TRF 201 buggy and has been stretched and widened to make it legal for racing under ROAR guidelines by using mostly Tamiya parts and a few from other manufacturers. The “TS-201SC” was built by Track Star RC in Winchester California to be raced, showcased and used as a test vehicle to draw interest from racers and enthusiasts alike to gauge the market for Tamiya through Track Star / Short Course HQ’s efforts. This is NOT a factory built prototype or pre production truck. However upon speaking to the powers that be at Tamiya USA they are excited about this project and we will continue to race and develop the “TS-201SC” for as long as they wish us to do so. A second test bed truck is currently being built by Track Star in a little bit different configuration and plans to possibly build a third configured truck are also in the works.

Source: Tamiya [teamtrf.com]


August 18, 2010

Sweep Racing silicone fuel tube

Sweep Racing silicone fuel tube

Sweep Racing have released their new and improved silicone fuel tube. Featuring a 2.6mm inner diameter, it has been made out of an extra flexible heat resistant silicone material, functioning under most demanding conditions. Sold in 100cm (39″) lengths.

Source: Sweep Racing [sweepracing.com]


August 18, 2010

Serpent S811 engine mount & Alu servo posts

Serpent S811 engine mount & Alu servo posts

More new parts from Serpent for their S811 Cobra buggy with the release of this precision machined anodized T6 aluminium monoblock type engine mount. The lower mounts remains seated on the chassis, and only the upper bracket remains attached to the engine, for quick and easy engine mounting/removal. Precise positioning is achieved with steel bearing-pins and threaded holes. A super finish with extra cooling fins on the side. Serpent have also introduced precision machined and anodized aluminium servo posts, these lightweight parts replace the standard steel parts.

View the servo posts here


August 18, 2010

Pro-Line pit bag

Pro-Line pit bag

Pro-Line has released their all new pit bag. Designed with 4 easy access drawer compartments, 5 zipper pockets and a top mounted tool pouch, the pit bag is user friendly and has enough room to store all your stuff. A collapsible pull handle and smooth rolling casters make transportation a breeze. Available in very limited quantities through Pro-Line’s website only.

View more images of the bag here


August 18, 2010

Pro-Line Sniper & Scrubs tires

Pro-Line Sniper & Scrubs tires

Having already seen some shots of this new tread pattern, Pro-Line have officially announced the Sniper. These 1/8 buggy tire uses the same design philosophy and technology as the Hole Shot, but scaled up to work in looser and dustier conditions. After initial testing, Pro-Line team drivers like Ryan Cavalieri and Travis Amezcua are already sold on the tire saying that the Sniper offers awesome forward traction and side bite in a variety of track conditions. The bigger pins also provide longer wear, giving you lasting traction through long A-mains. Available in M2 (Medium), M3 (Soft), M4 (Super Soft) compounds. PL have also released their all new Scrubs 2WD front buggy tire. Designed specifically for wet and dry clay tracks, the scrubs front tire offers an optimum angled bar side bite, as well as a pin design, which will make your buggy track like an arrow. Offered in our M3, MX and MC compounds to meet your entire clay track needs.

View the Scrubs here


August 18, 2010

Pro-Line Desert Rat 2.0 for Blitz

New for HPI Blitz owners, Pro-Line have released the Desert Rat 2.0 designed exclusively for the Blitz that maintains all the design queues required to maximize performance while keeping your SC looking sharp. Featuring bold off-road Short Course (SC) styling, it has been made made with Crystal Clear Genuine GE Lexan and comes supplied with a detail decal sheet and window mask.

View more images of the shell here


August 17, 2010

LiFeSource AC/DC Economy LiFe charger

LiFeSource AC/DC Economy LiFe charger

The new LiFeSource AC/DC Economy LiFe charger is a simple option for powering up your LiFe packs. Utilizing the cc/cv charge method, with voltages customized for LiFe batteries, it’s small, lightweight and very simple to operate and comes in at a very low price. The AC/DC Economy Charger can handle 110V AC or 12V DC input so it’s great to use at home or at the field/track A built-in balancer ensures all cells are charged to optimum voltage every time.

Source: LiFeSource [lifesourcebatteries.com]


August 17, 2010

Cockerill wins 2wd Nats in Cougar SV debut season

Cockerill wins 2wd Nats in Cougar SV debut season

Schumacher were in touch to tell us that in its debut season the Cougar SV has won the BRCA British 2WD Off Road Championship. Congratulations to Tom Cockerill who secured the title at the last round of the series at the Stotfold track this weekend.  In spite of having an off day and only making the B final Tom’s main championship contenders failed to improve on their points scores so Tom watched on and won the championship from his marshalling post. However the Cougar SV was working extremely well on the wet slippery track with 5 Cougar SV’s making the final.  With Simon Moss finishing an excellent 3rd and congratulations to Dave Poulter and Lloyd Storey who both made their first national A finals with the Cougar SV.  Grant Williams and Jonathan Palmer rounded out the 5 cars in the A, in what was an excellent team performance.

Source: Schumacher [racing-cars.com] / Image: oOple [oople.com]


Mibosport
TargetRC
VP Racing
T-Works