Red RC » Brand

June 23, 2010

RB double filtration fuel filter

RB have designed this high capacity fuel filter with double filtration. The filtration takes place twice using the smallest filter available and the filter’s extra 2.3cc leaves a big fuel quantity close to the carburetor that helps avoid the engine from flaming out when the car is upside down for too long. Delivered with its nylon holder, tube holder, dust protections and all the necessary fasteners to secure the assembling on the car. Available in orange or ice grey color.

View the filter’s internals here

June 23, 2010

Hudy cable with LiPo connectors

New from Hudy is this simple Tamiya battery connector with LiPo connectors. This optional cable will allow the use of LiPo batteries in the company’s On-road starter box and Off-road starter box.

Source: Hudy [hudy.net]

June 23, 2010

Sweep Racing off road car stand

Sweep Racing’s all new off road car stand comes with tall stance to meet the demanding needs of 1/8 truggies, 1/8 buggies and the ever growing short course category. Features include anti-slip foam padding along with 4 labeled shock holding holes and rubber feet which ensure he stays put on your work bench. Gold anodized it features the Sweep and SR logos etched into the sides.

View the top of the stand here

June 23, 2010

RPM Adjustable Height Slash 4×4 body mounts

RPM’s new adjustable height body mounts for the Traxxas Slash 4×4 are designed to give you optional body height positions where stock left you none. This version of the Slash 4×4 body mount starts off lower than stock by 1/8” (or approx. 3.2mm) and they supply a pair of molded spacers to allow you the option of a stock height body position using the thin spacer under the body mount. If monster suspension travel is needed or you just like the higher stance and larger wheel well openings a taller body mount provides, you can increase the height by 1/8” using the thicker of the two spacers. In extreme cases, both spacers may be used for a full 1/4”* (6.35mm) of extra body height. Engineered with new, larger ribs into the mounts to provide extra rigidity and support for the body while keeping weight to a minimum.

Source: RPM [rpmrcproducts.com]

June 22, 2010

RC Devil Mephyx 1/12 pan car

New from RC Devil in Germany is the Mephyx high performance full tuned 1/12 pan car. Based on the winning technology of the PC10H2, this new chassis claims an extraordinary design, high-quality materials and excellent racing performance. Featuring a ‘new & revolutionary’ magnetic side suspension for easy tweak setting & progressive suspension, the car utilizes their V-Link rear axle technology with adjustable roll center for different track conditions as used in their 1/10 Pro PC10H2.

View the full features list and more images

June 22, 2010

Sweep Racing USA signs Mike Haynes

Ready to kick off a great outdoor season, Sweep Racing USA have announced that 2009 ROAR National champion Mike Haynes has joined their national level team. Having great success in the past in rubber tire classes he will have a very important roll on the team, helping drivers & customers with setup and rubber tire fundamentals, along with testing and development the latest product before production. Mike has already begun running for Sweep since last month and had this to say.

After having the opportunity to test out these tires i am very excited to be helping promote the brand within the US. The tires run very consistently run to run and in rubber tire racing this is key! Many tires are fast for a couple of runs but the Sweeps seem to be fast for many.

Source: Sweep Racing [sweepracingusa.com]

June 22, 2010

JConcepts MBX-6 Punisher & 2.2″ Flip Outs

New from JConcepts is the Punisher body for the Mugen MBX-6. The radical new Punisher body features the slight cab-forward treatment which is amongst the most aggressive in class giving the Punisher top notch performance. Blended wing / body design gives additional down-force to the side-pods and windshield which increases drivability, corner speed and jump control. The rear base of the cab area represents the latest offering for 1/8th buggy racing featuring a super low profile design for increased engine cooling, air flow and escape. Also new are these Flip Outs, giving drivers that tire in-between the Goose Bumps and Double Dees they have asked for. A very small pin construction makes up the foundation for the Flip Outs design and gives the grip when the conditions are wet and green in the morning, when traction is sometimes hard to come-by. These tires are now available in green compound for both the 2.2″ 4wd front wheel and the 2.2″ truck wheel.

View more product images here

June 22, 2010

JConcepts Ford Raptor SVT SCT-R body

JConcepts has reached new ground with the Short Course version of the popular Ford Raptor SVT body for competition Short Course racing, hanging the acronym SCT-R on the new body with the R giving it racing credibility. Officially licensed by JConcepts, the Ford Raptor SVT body is inspired from the ground up as an all-out SCT race body. Beginning with the latest in 1:1 truck detail by incorporating the latest treatment in grill and headlight design, adding street appeal, the front and rear fender flares provide the clearance necessary to run an assortment of tires and wheels while maintaining that exclusive design and look. Extended cab design with recessed side windows, louvers along the front hood highlight a number of the front-end styling cues, while deep recessed trim-out locations along the hood and bed area provide ample space for air relief cut-outs which reduce the parachute / blow-over affect that is so common in Short Course racing.

View more images of the body here