Red RC » Brand

April 6, 2023

OfficinaRC ST112 Centering Screw

New from high precision screw brand OfficinaRC is the ST112 Centering Screw for Awesomatix. Made of certified quality solid titanium from Italy, it replaces the standard iron screws in the kit. These special screws have a circular surface at the base of the screw cone, which allows for centring of the piece due to the arrangement of the parts in which it is screwed. Not only do these screws make the model more beautiful and precious, but the titanium specifications also help to lighten the new A800R. Some technical choices have, in fact, made it heavier than the previous version. The new screws are already available in packs of four and as a Full Titanium Bottom screw kit. The “OfficinaRC Titanium SFS + Centering Lower Full Kit for Awesomatix A800R (41)” replaces the standard iron screws with OfficinaRC screws made from the best solid titanium in Italy. This kit replaces all screws used to fasten various parts to the chassis, including the special Centering Screw. In addition to providing an attractive look to the model thanks to the technical specifications of the material, this kit reduces the weight of the screws by approximately 30% compared to the originals.

View screws cintained in full lower kit here

April 6, 2023

Yokomo BD12

Yokomo has officially released details of its newest 1:10 Touring Car the BD12. The Japanese World Championship winning manufacturer says their ‘touring cars, which bring innovation with its highly creative design, has evolved into the “BD12”, a racing machine that tends to be uniformly designed. While maintaining the same balance between pitching and roll as before, the racing design has achieved an even lower centre of gravity. The advanced design makes the obvious a thing of the past, and will lead the racing scene in the 2023-24 series. Based on a new motor mount that controls pitching rigidity, the chassis roll is controlled by the front and rear split upper decks, which together with the A.T.F active top deck flex, provide sharp cornering. The front and rear shocks are also shortened, and bearings are mounted in the spring holders to absorb spring torsion when the shocks are actuated, resulting in linear operation.

View Spec and more images here

April 5, 2023

Sworkz S14-4 Series 2.5mm Alu Chassis

Sworkz has released for their S14-4 1:10 Offroad Buggy series this stronger 2.5mm aluminium chassis. Produced from high quality 7075 aluminium with lightened CNC machining, the hard coated surface protects your chassis and creates less friction. It 100% fits on your S14-4 without any modifications. The chassis lowers the Center of gravity and reduces flex. Therefore the steering is more precise and you have less load changes and it is fits perfectly at High Grip conditions.

Source: Sworkz [Facebook]

April 5, 2023

MIBO Drift King Gyro

MIBO has introduced a new Drift King Gyro that is a new generation among gyros of its category. Racers may have come across gain curve settings (PCA, QUICK, Gain curve etc.) on a top-end gyros already but until now, it was in higher price range and harder to set up. This function, however, moves the RWD drift machines driving to a next level. Setting the gain level is not just about compromise between enough stabilisation and not losing steering response, thanks to it. It allows the smoothest possible ride, with sensitive control and quick angle changes. That’s why we wanted to bring the gain curve to a lower price category. The curve progression was tuned in cooperation with drivers of various categories, from beginners to experienced competition drivers, so it fits well for most users possible and built into the gyro software. That means it works optimally right after switching the gyro on and doesn’t bring any extra setting to worry about.

View Features and Spec here

April 5, 2023

Yokomo MD1.0 Red/Purple Version

Yokomo has released two limited editions of their Master Drift MD1.0 drift car, the Red Version and the Purple Version. A drift car chassis that has gained the support of expert drivers as a high-end competition machine, it is now available in a limited edition version covered with red/purple colour anodised parts. The contrast between the chic matte graphite parts and the brightly coloured anodised parts dramatically increases the sense of ownership of the chassis. The basic design is the same as the previous MD1.0, but this colour version has a 4-gear rear drive for even greater acceleration traction. This specification is ideal for P-tile and coloured concrete surfaces with low grip, increasing the sense of speed in single runs and building an advantage in pursuit runs as well.

View more images here

April 4, 2023

Reds Racing Rotary Backplate

Reds Racing has finally released its RTX Rotary Backplate which the Italian engine brand claim is an engineering masterpiece that will revolutionise the world of RC Model Nitro Engines. Developed by Marco and Mario Rossi in collaboration with some of the best RC drivers in the world, the backplate aims to increase engine power and improve stability at idle speed thanks to a drastic reduction in friction between the connecting rod and backplate. Reds Racing was one of the first companies in the world to work on reducing the friction between the backplate connecting rod with the introduction of DLC coating on the backplate. This time their engineers have invented something unique in the RC model market, destined to be considered one of the most innovative solutions of the last 30 years. Contrary to what happens for traditional RC engines, where the connecting rod slides on the backplate producing sliding friction, in the RTX Backplate the connecting rod is in contact with a special steel plate that can rotate together with the conrod thanks to the fact that it is mounted on two special high speeds ball bearings. The backplate is designed, made and tested in Italy respecting the best quality standards. It is currently only available as an optional part and suitable only for Reds Racing engines on road and off road.

View more images here

April 3, 2023

Wood wins British 1:8 Onroad Nationals opener

Tim Wood has won the opening round of the 2023 BRCA British 1:8 Onroad National Championships. Hosted by the Cotswold Model Car Club over the weekend, the first encounter of the 6 round championship would see the Team Shepherd driver top all four rounds of qualifying but it was his run in Q3 that secured him the TQ honours. Behind, Andrew Hastings would line-up second with his Capricorn after he posted his fastest time in Q2. John Carr completed the Top 3 posting his quickest run in the penultimate qualifier. In the 30-minute final it would be a repeat of last year’s penultimate round visit to the Cotswolds track, as Wood secured a comfortable win with his Hasi Tuned powered Velox V8.2s. Hastings would finish second while the Serpent of Matthieu Dambrine, fifth fastest in qualifying, completed the podium as Carr retired after 8-minutes.

Image: BRCA [Facebook]

April 3, 2023

MIBO Duo Racing Charger

Continuing the roll out of its new range of racing accessories, MIBO has released this small dual-channel Duo Racing AC/DC 200W Charger/Discharger. It is an intelligent charger with mains and car battery power supply and very simple and straightforward operation. The MIBO Duo Racing AC/DC 200W Charger/Discharger allows you to charge common battery types, plus it is equipped with built-in six-channel balancers to ensure safe charging of lithium batteries. The charger is equipped with a colour LCD display and a programming wheel and button, which provide you with the possibility of comfortable and fast parameter setting, control and monitoring of the charging process. In addition to the compact “palm-sized” design and intuitive operation, it is worth a special mention that it has a program for new types of high-voltage LiHV batteries with a terminal voltage for charging up to 4.35 V. It offers the possibility of synchronous operation of both channels for charging two identical batteries. Adjustable charging end voltage for lithium batteries allows the gentle charging that aviators like, or the brutal overcharging that “car guys” like.

View function list and more images here