Italian company DiMonaco Racing products has released a whole new range of shock oils for use in all off road model cars. Made from certified silicone oil of the finest quality, this shock oil comes available in a wide range of viscosities from 100 – 900 cst, and DiMonaco also offer differential oil of the same quality too, available in thicknesses ranging from 1000 to 100,000cst.
Source: Modellismo RC [modellismorc.net]
Xray have a report on their site about the recent Russian National electric touring car race that was held last weekend in Vladimir, not far from Moscow. In the Modified class Zuykov Denis dominated the event by taking TQ spot and the overall win, finishing ahead of team mate Lopukhin Artem whilst in stock class it was Smirnov Alex that took the win ahead of Dren’kov Evgeniy.
Team XRAY dominated the qualifications up to the last final and as a result, best lap, TQ and win in TC10 were set by Team XRAY which was represented in the A final by Zuykov Denis, Artem Lopukhin, Bogdanov Vladimir. It’s also important to know that 11 year old Vladimir won the Junior Championship.
You can read the full report here.
Source: Xray [teamxray.com]
During the Nurnberg toy fair a few weeks back we showed you some pictures of Kyoshos all new 2wd competition buggy, the Ultima RB5. We didnt have any more information on the car other than what we could see and the little bits that we had read, so now that Kyosho have released the complete details of this completely new car we have decided to post all the information right here for you reading and viewing pleasure.
To view all the pictures and the full product release go here… content
Mugen have released loads of new products, specifically for their 1/10th 200mm MTX4, off road 1/8th scale MBX5 and MBX5-T as well as this nice ride height gauge above for all their on road cars. For the MTX4, they have released an adjustable rear anti roll bar as well as a new rear upper camber link mount with a number of mounting holes to allow you to adjust the cars roll center. Whilst for the Mugen off road guys there is a new teflon coated servo saver tower as well as new wheels in white and yellow to fit Proline rubber, new rear spoiler and 3 new complete sets of shock springs in blue grey and white.
Click more to see images of all the new products… content
Serpent have announced the release of this great add on for your Serpent 720 that puts a one way bearing on the brake pulley on the cars 2 speed axle. This set, which allows your car to run as normal, comes into play when the rear tires start to wear more than the fronts which in normal cases where permanent 4wd is in place can cause the car to be unstable under braking in long runs. This optional set allows the front wheels to rotate independantly from the rear wheels when off throttle which means when you have uneven tire wear you dont get the rear end of the car trying to pass out the front under braking. Neat.
Source: Serpent [serpent.com]
Xray have a article on their site from Swiss Xray rider Robin Frischkopf who reports on the Indoor Race Flawil which attracted over 100 entries from Germany and Switzerland. The race took place on an old indoor horse riding arena which made it very tight and seemed to cause some problems for Robin, who eventually ended up in the quarter finals after qualfiying but managed to bump in race day to the semis and then into the Main final where he finished in 2nd position behind eventual winner Markus Eirenschmalz, also driving Xray.
However, German driver Markus Eirenschmalz (also driving an XRAY XB8TQ) was a little bit faster than me. We battled for a long time and were only seconds apart. Nearing the end of the final I was again in some traffic and got crashed into, so he was half a lap ahead of me. For the last part of the final I tried to catch up but I couldn’t quite make it. In the end there was still only half a lap between us so I settled for a good second place.
You can read the full report here.
Source: Xray [teamxray.com]
We’ve written briefly about Masaaki Hirosaka, father of multiple World Champion Masami and top RC mechanic, before and the fact that he makes some pretty cool well thought out products. Well here is his take on the Kyosho Stallion TF-5 which takes a different approach to that used by Josh Cyrul who’s car we saw at the Snowbirds. As you can see from the pictures, the batteries have been set further back than normal and where the top deck connects with the front bulk head is pretty unique too, although i cant tell you exactly why. Also note that the rear body mount is bolted directly to the bulkhead which means the downforce generated by the body shell is pushed straight down onto the chassis, its mounting position also protecting it from crashes.
Masaaki has also created patent pending one touch total length adjustment shock absorbers. I cant tell how they work either but i have included pictures of them below.
Click more to check out more pictures of the car and shocks… content
Pro-Line have released some new 1/8th scale buggy tyres based on the Hole Shot MTR that debuted at last years US truck Nationals and took home the win. Available in Pro-Line’s competitive M2 and M3 compounds the new tyre sports oversized inner ribs for anti-tire ballooning under acceleration and features a small pin design for use on hard-packed tracks.
Source: Pro-Line [prolineracing.com]
